Florian Festi
604ea923af
New generator: BasedBox
2020-06-22 19:57:18 +02:00
Florian Festi
ea0c9480e1
TriangleLamp: Fix hole position in front
2020-06-16 22:56:01 +02:00
Florian Festi
cd884c63bf
AngledBox: Add bottom_edge parameter
...
Also fix bug with non matching finger joints between side walls and
miss alignment of the bottom and top pieces
2020-06-03 21:56:55 +02:00
Florian Festi
ecaba08aa6
New generator: DinRailBox
2020-05-29 22:59:15 +02:00
Florian Festi
c5a35bd3ec
CardBox: Fix typo
2020-05-27 17:27:23 +02:00
Florian Festi
baf996764c
CardBox: Add building instructions
...
including a new picture of lid details by https://github.com/bwente
2020-05-26 18:07:17 +02:00
Stefan Schwarz
c065e154be
Generator for a split Atreus keyboard
2020-05-23 23:28:35 +02:00
Florian Festi
c978266906
DividerTray: Fix bottom edge for middle walls
2020-05-22 10:25:55 +02:00
Florian Festi
89805b4804
New generator: SideDoorHousing
2020-05-12 21:54:59 +02:00
Florian Festi
6091cf955f
Comsole2: Move to Box group in the UI
2020-05-10 16:13:54 +02:00
Florian Festi
928be1620b
UniversalBox: Change default for outset to True
...
for edge with hinge eye (i) top_edge
2020-05-05 22:03:20 +02:00
Florian Festi
1f2d35082d
Console2: Properly name front_height parameter
2020-05-05 18:28:52 +02:00
Florian Festi
0acc9c2a38
Console2: Move back wall latch down
...
to reduce chance of it conflicting with the front panel
2020-05-05 18:13:03 +02:00
Florian Festi
05a7e02486
Console2: Images, descriptions and parameters for hatches
...
Add three new parameters: removable_backwall, removable_panel and glued_panel
that control which of the service hatches are present and how to attach
the front panel
2020-05-05 09:44:07 +02:00
Florian Festi
93273f2fc7
Console2: Improve and fix latches
2020-05-02 18:42:36 +02:00
Florian Festi
e2d716aeb8
Console2: Fix bottom edge for front and back
2020-05-01 23:49:05 +02:00
Florian Festi
d45ccba307
New generator: Console2
2020-05-01 23:36:44 +02:00
Florian Festi
54d4b6bebd
Console: Fix x, y confusion
2020-04-29 12:25:46 +02:00
Florian Festi
279b60abc8
New generator: Console
2020-04-28 22:25:47 +02:00
Stefan Schwarz
2f2256ec7d
Keypad support for CPG151101S11 hotplug sockets
2020-04-13 20:11:44 +02:00
Florian Festi
f961cd533d
KeyPad: Improve parameter descriptions
2020-04-13 13:53:38 +02:00
Florian Festi
195c68c28f
Rail holes dist ( #213 )
...
* added EurorackSkiff Generator
* fixed holes distribution
2020-03-05 23:09:03 +01:00
Stefan Schwarz
3a14e1796b
Generator for keypads with mechanical switches
2020-03-04 20:24:47 +01:00
Florian Festi
80edaf5ac4
New generator: BottleStack
2020-02-29 18:19:59 +01:00
Florian Festi
4c338e1c62
RoundedBox: Add edge_style parameter
2020-02-28 17:52:57 +01:00
Erwin Jansen
a0338a559f
Add a bottom to the divider tray.
...
This add support for the generation of a bottom for the divider tray.
The bottom can be generated by passing the --bottom=True flag.
This makes it possible to generate ./static/samples/DividerTray.jpg
2020-02-26 21:00:26 +01:00
Florian Festi
eeb1baf352
Gear: don't allow less than 2 teeth
2020-02-01 15:30:53 +01:00
Florian Festi
ec9d911142
DividerTray: Use ValueError instead of assert to treat this as wrong user input
2020-02-01 15:17:18 +01:00
Florian Festi
069dd853aa
BinTray: limit front parameter
2020-02-01 15:14:12 +01:00
Florian Festi
2121228036
TrayLayout: Error out if tray is just a single wall
2020-02-01 14:51:38 +01:00
Florian Festi
2a7e1e62d1
PaintStorage: Prevent division by zero
2020-02-01 14:31:24 +01:00
Stefan Reichhard
37bff9d358
fixed d3 diameter (mounting screw holes)
2020-01-22 16:11:18 +01:00
Florian Festi
1f3110c6fa
New generator: TriangleLamp
2020-01-21 21:34:02 +01:00
Florian Festi
e2b87af2a4
UniversalBox: Add outside parameter
...
Fixes : #144
2019-12-14 19:13:40 +01:00
Florian Festi
aba9631b00
Make joints of box sides go to the very bottom
...
for NotesHolder, TypeTray and UniversalBox.
The same should be done to many other boxes as soon as they get the
bottom_edge parameter
Resolves : #111
2019-12-14 14:18:38 +01:00
Florian Festi
c5474e7488
DiscRack: Limit lower_factor and rear_factor to smaller than one
2019-12-14 12:23:08 +01:00
Florian Festi
024b574763
TrayLayout: Add default for layout param
2019-12-14 12:14:24 +01:00
Florian Festi
093e10a3ac
AngledBox: Use FingerJointSettings for vertical edges, too
2019-12-06 23:37:22 +01:00
Florian Festi
bd1db150c7
New geneator: SpicesRack
2019-11-29 19:58:27 +01:00
Marius Bergmann
9f8b84b3f1
add parameters for banana socket and flipswitch diameters
2019-11-20 11:57:13 +01:00
Marius Bergmann
2c367562a9
remove commented code
2019-11-20 11:57:13 +01:00
Marius Bergmann
90fdf897a9
formatting: whitespace cleanup
2019-11-20 11:57:13 +01:00
Florian Festi
c67d1f874c
StorageShelf: Add retainer_hole_edge param
...
to allow strengthening the retainer walls by using an h edge.
Also use a h edge on the bottom retainer wall if selected as bottom_edge.
2019-11-09 23:32:12 +01:00
Florian Festi
e8cda89381
StorageShelf: Fix holes for inner vertical walls
2019-11-09 23:31:26 +01:00
Florian Festi
71711baa1a
StorageShelf: Add retainer wall
...
This patch does not add finger joints to the vertical walls to attach the
retainer walls as the walls are likely to be to small to be able to make use
of them. In hte long run they should be added, though.
2019-11-09 17:10:23 +01:00
Florian Festi
0cdc930459
StorageShelf: Change front edge from E to e
...
This makes the shelf one thickness less deep - as it should be
2019-11-09 16:10:30 +01:00
Florian Festi
923798beb9
SBCMicroRack: Fix dowel diameter
2019-11-07 15:38:16 +01:00
Florian Festi
2860a32360
SBCMicroRack: Comment out unfinished fan parameter
2019-11-07 15:38:16 +01:00
Florian Festi
d9c190073b
SBCMicroRack: Don't draw bottom fingerholes twice
2019-11-07 15:38:16 +01:00
Florian Festi
af6c9be8f7
SBCMicroRack: Rearrange parts
2019-11-07 15:38:16 +01:00