c86ae75712
Parametrizise the drillbox
2021-06-03 21:40:11 +02:00
22a50a6181
PhoneHolder: Fix edge of second side being reversed
...
The code switched sides for each edges draen reversed. Change that to
only reverse local variables and leave the edge objects unchanged.
Thanks to https://github.com/ChrisLaserman for reporting!
Resolves : #324
2021-05-31 17:04:17 +02:00
be7115007d
SlatwallPinRow: Make it actually work
...
Remove finger joints from pinplate as there are not matching holes.
Move finger holes on back plate to right place.
2021-05-24 22:16:59 +02:00
bdcad5ee27
New generator: SlattwallStairs
...
Renders a stair like structure that can house tools like screw drivers
if the proper holes or slots are added.
2021-05-23 13:00:52 +02:00
538d5af99b
New generator: DoubleFlexDoorBox
...
Still untested and missing a sample image
2021-05-22 14:10:16 +02:00
b0861bf937
Add platonic solid generator
...
Resolves : #254
2021-05-16 15:07:53 +02:00
3a979bcfc6
Extend PaintStorage to make stackable drawers
...
Add an extra argument --drawer that changes it to a simple drawer
Co-authored-by: Florian Festi<florian@festi.info>
Resolves : #315
2021-05-16 14:58:18 +02:00
eec53625f7
New generator: SlatwalPinRow
...
Angled pins to hang stuff from.
Still untested.
2021-05-15 15:45:44 +02:00
072ff9b032
New generator: DrillStand
...
A stand-alone (no pun intended) version of the SlatwallDrillBox
2021-05-15 15:45:25 +02:00
d478edd5d7
Add coffee capsule holder generator
2021-04-25 11:25:30 +02:00
41165731c9
DisplayShelf: Fix calculations for negative angle values
2021-04-02 16:11:11 +02:00
97d85ff10e
Add PhoneHolder
2021-03-22 22:45:55 +01:00
3a3304de67
mention similar ones in burn test
2021-03-22 19:45:06 +01:00
69bf15a682
serraded -> serrated typo
2021-03-22 19:41:33 +01:00
9bdd5e4dda
mentioned ClosedBox and BasedBox in each other descriptions
2021-03-20 21:26:54 +01:00
23ee7b3eb2
copy closedbox description to basedbox description as applicable
2021-03-20 21:26:54 +01:00
000ba92106
fix typo in description
2021-03-20 21:26:54 +01:00
e8fc07d33d
increase play in two piece to 0.15
...
note: I am very inexperienced, this is based on a single test (with 0.05 and 0.15 box) and advice from local expert
both apply to plywood
2021-03-17 15:24:46 +01:00
7355d0d612
TrayLayout: Give more descriptive parse errors
...
Also allow both X and now also x for removed floor
2021-03-15 13:50:35 +01:00
7397e49b2b
TrayLayout: Add description text
...
Resolves : #295
2021-03-15 13:50:35 +01:00
21ca3d0b98
try to add explanation how burn test works
...
fixes #288
2021-03-02 14:12:42 +01:00
3efd941ff1
Keyboard: 19.05 mm spacing is more standard than 19
2021-02-27 21:02:07 +01:00
72c7fca53e
Keyboard: clean and column callback spacing default value
2021-02-27 21:02:07 +01:00
61b85a6aed
Keyboard: add shared settings with new options
2021-02-27 21:02:07 +01:00
0c89ad2b17
Keyboard: fix alignment in atreus21 and keypad
2021-02-27 21:02:07 +01:00
0d4d4f308b
Keyboard: move common code to mixin (atreus21, keypad)
2021-02-27 21:02:07 +01:00
ec8abee265
Atreus21: clean dead code and magic numbers
2021-02-27 21:02:07 +01:00
44a9041427
attempt to make burn test description more newbieproof
...
fixes #284
2021-02-27 20:56:03 +01:00
33917a6113
fix typo
2021-02-24 21:03:52 +01:00
d694bd3241
Fix DividerTray length with 'outside=false'
2021-02-14 10:20:16 +01:00
9642b9aacc
Add PaperBox
2021-01-28 13:59:47 +01:00
eea27ee74d
Implementation of FlexSettings
...
Addding of FlexSettings to RoundedBox to adjust the flexibility setting for the corners
2020-12-29 22:29:27 +01:00
e6dccc4135
StorageRack: Add pictures
...
Thanks to https://github.com/impellerturn for providing the images!
2020-12-29 15:33:27 +01:00
34260e1b01
Castle: Actually add description
2020-12-29 15:18:37 +01:00
b41a3114ca
AgricolaInsert: better thickness range support
2020-11-16 22:46:43 +01:00
7afe0329a2
MakitaPowerSupply: Dynamically calculate vent holes
2020-11-10 18:00:40 +01:00
043f208213
AllEdges: Fix for new backend
2020-11-09 19:15:55 +01:00
09b4de82de
MakitaPowerSuppy: Replace hyphens parameter names
2020-11-09 19:15:55 +01:00
cdc89e3cde
SilverwareBox: Add missing stroke() command
2020-10-20 17:00:15 +02:00
90c783568f
OttoBody: Fix issue with HexHoles that broke the generator
...
Thanks to https://github.com/ottobot42 for reporting.
Resolves : #250
2020-10-19 21:00:38 +02:00
dabab1880f
SpicesRack: Fix feet to support first level
2020-10-13 22:49:19 +02:00
1dd567657e
Fix use of roundedPlate in Display and LaserClamp
...
Thanks to Guillaume Collic (https://github.com/gcollic ) for reporting!
Resolves : #248
2020-10-13 20:00:09 +02:00
6dff8db710
Add alignment pins to BayonetBox
...
Also add a lower ring to the bayonet lid of the RegularBox limiting rotation
2020-10-13 16:07:31 +02:00
f74e86c38f
BasedBox: Add description and point people to edge_width
2020-10-11 14:01:03 +02:00
dfc2f075d9
Adding Grooved Edge (z, Z), example use in UnevenHeightBox
2020-09-29 20:40:18 +02:00
2a55183e50
AgricolaInsert: optimize player box generation layout
2020-09-20 12:37:29 +02:00
9e83c2ad9b
Add AgricolaInsert box
2020-09-20 12:37:29 +02:00
7495de72f7
DividerTray: refactor, and makes it easier to reuse
2020-09-20 12:37:29 +02:00
7fd4306664
Add h edge to top_edge parameter
...
Resolves : #244
2020-09-19 22:39:30 +02:00
f058ce68fb
Add --lid_height in UnevenHeightBox
2020-08-28 10:35:10 +02:00
d34d6ed987
fixed proper use of settings in paintbox.py
2020-08-15 09:47:40 +02:00
f6e2773810
fixed bug where the option hexpattern=True would cause an error.
2020-08-14 12:30:21 +02:00
0980270dcf
RectangularWall: Fix list of available edge types
...
M -> N
2020-08-04 23:41:08 +02:00
d3fa5ec0d4
UniversalBox: Add vertical_edges parameter
...
to allow finger hole joints for more stability
Fixes: whining by wu
2020-08-04 21:52:25 +02:00
efe87c3e2e
TwoPiece: Add hi parameter to allow for lower inner wall
2020-08-04 19:33:11 +02:00
9bbca5419f
New generator: NemaPattern
2020-08-04 19:33:11 +02:00
4d2db03dc4
New generator: FanHole
2020-08-04 19:33:11 +02:00
b8432e93af
New generator HexHoles
2020-08-04 19:33:11 +02:00
415b133822
Add new Hole Patterns group
2020-08-04 19:33:10 +02:00
3dc5aa997c
Console: Fix for front_height == 0
...
Thanks to dougw (https://hackaday.io/hacker/885177-dougw ) for pointing
this out!
2020-07-23 16:19:56 +02:00
262d7804a4
Console and Console2: Add outside parameter
...
Also rename hi param to front_height in Console
2020-07-23 16:13:59 +02:00
402c04568e
DividerTray: Add Finger Joint Settings
...
Thanks to John Hildebrand https://hackaday.io/hacker/528106-john-hildebrand
for jointing out that they were missing!
2020-07-09 00:22:13 +02:00
2575cc39df
Add support for a bayonet mount lid to the RegularBox
...
Adjust BayonetBox to make the pieces usable from outside
2020-06-23 21:47:08 +02:00
604ea923af
New generator: BasedBox
2020-06-22 19:57:18 +02:00
ea0c9480e1
TriangleLamp: Fix hole position in front
2020-06-16 22:56:01 +02:00
cd884c63bf
AngledBox: Add bottom_edge parameter
...
Also fix bug with non matching finger joints between side walls and
miss alignment of the bottom and top pieces
2020-06-03 21:56:55 +02:00
ecaba08aa6
New generator: DinRailBox
2020-05-29 22:59:15 +02:00
c5a35bd3ec
CardBox: Fix typo
2020-05-27 17:27:23 +02:00
baf996764c
CardBox: Add building instructions
...
including a new picture of lid details by https://github.com/bwente
2020-05-26 18:07:17 +02:00
c065e154be
Generator for a split Atreus keyboard
2020-05-23 23:28:35 +02:00
c978266906
DividerTray: Fix bottom edge for middle walls
2020-05-22 10:25:55 +02:00
89805b4804
New generator: SideDoorHousing
2020-05-12 21:54:59 +02:00
6091cf955f
Comsole2: Move to Box group in the UI
2020-05-10 16:13:54 +02:00
928be1620b
UniversalBox: Change default for outset to True
...
for edge with hinge eye (i) top_edge
2020-05-05 22:03:20 +02:00
1f2d35082d
Console2: Properly name front_height parameter
2020-05-05 18:28:52 +02:00
0acc9c2a38
Console2: Move back wall latch down
...
to reduce chance of it conflicting with the front panel
2020-05-05 18:13:03 +02:00
05a7e02486
Console2: Images, descriptions and parameters for hatches
...
Add three new parameters: removable_backwall, removable_panel and glued_panel
that control which of the service hatches are present and how to attach
the front panel
2020-05-05 09:44:07 +02:00
93273f2fc7
Console2: Improve and fix latches
2020-05-02 18:42:36 +02:00
e2d716aeb8
Console2: Fix bottom edge for front and back
2020-05-01 23:49:05 +02:00
d45ccba307
New generator: Console2
2020-05-01 23:36:44 +02:00
54d4b6bebd
Console: Fix x, y confusion
2020-04-29 12:25:46 +02:00
279b60abc8
New generator: Console
2020-04-28 22:25:47 +02:00
2f2256ec7d
Keypad support for CPG151101S11 hotplug sockets
2020-04-13 20:11:44 +02:00
f961cd533d
KeyPad: Improve parameter descriptions
2020-04-13 13:53:38 +02:00
195c68c28f
Rail holes dist ( #213 )
...
* added EurorackSkiff Generator
* fixed holes distribution
2020-03-05 23:09:03 +01:00
3a14e1796b
Generator for keypads with mechanical switches
2020-03-04 20:24:47 +01:00
80edaf5ac4
New generator: BottleStack
2020-02-29 18:19:59 +01:00
4c338e1c62
RoundedBox: Add edge_style parameter
2020-02-28 17:52:57 +01:00
a0338a559f
Add a bottom to the divider tray.
...
This add support for the generation of a bottom for the divider tray.
The bottom can be generated by passing the --bottom=True flag.
This makes it possible to generate ./static/samples/DividerTray.jpg
2020-02-26 21:00:26 +01:00
eeb1baf352
Gear: don't allow less than 2 teeth
2020-02-01 15:30:53 +01:00
ec9d911142
DividerTray: Use ValueError instead of assert to treat this as wrong user input
2020-02-01 15:17:18 +01:00
069dd853aa
BinTray: limit front parameter
2020-02-01 15:14:12 +01:00
2121228036
TrayLayout: Error out if tray is just a single wall
2020-02-01 14:51:38 +01:00
2a7e1e62d1
PaintStorage: Prevent division by zero
2020-02-01 14:31:24 +01:00
37bff9d358
fixed d3 diameter (mounting screw holes)
2020-01-22 16:11:18 +01:00
1f3110c6fa
New generator: TriangleLamp
2020-01-21 21:34:02 +01:00
e2b87af2a4
UniversalBox: Add outside parameter
...
Fixes : #144
2019-12-14 19:13:40 +01:00
aba9631b00
Make joints of box sides go to the very bottom
...
for NotesHolder, TypeTray and UniversalBox.
The same should be done to many other boxes as soon as they get the
bottom_edge parameter
Resolves : #111
2019-12-14 14:18:38 +01:00
c5474e7488
DiscRack: Limit lower_factor and rear_factor to smaller than one
2019-12-14 12:23:08 +01:00
024b574763
TrayLayout: Add default for layout param
2019-12-14 12:14:24 +01:00
jens persson
Florian Festi
Norbert Szulc
Guillaume Collic
Mateusz Konieczny
jomjol
Marcin Zukowski
Ba-So
Stefan Schwarz
Erwin Jansen
Stefan Reichhard