Plenty of dependency adjustments, printf format specificier updates,
FreeRTOS type and macro name modernisation, not to mention API changes.
Still plenty of legacy/deprecated drivers in use which will need updating.
The following features have been removed due to no longer being available
from the IDF:
- ADC hall effect sensor reading
- Configuration of SD SPI host via sdmmc module (now must be done first
via the spimaster module)
- FAT partition selection on external SD cards; only the first FAT
partition is supported by the IDF now
On the other hand, the eth module now supports the following new chipsets:
- KSZ8001
- KSZ8021
- KSZ8031
- KSZ8051
- KSZ8061
- KSZ8091
- Possibly additional models in the LAN87xx series (the IDF docs aren't
clear on precisely which models are handled)
Further, the sdmmc module is now available on the ESP32-S3 as well.
By not relying on the internal details of the RMT registers. For example
on the esp32s2, the threshold event bits start at bit 12 not bit 24, and
on the esp32s3 the memory buffers are only 48 words not 64. Also the
esp-idf recommends against hooking the rmt ISR in the first place.
Instead, use the published rmt APIs (specifically rmt_write_sample and
rmt_translator_init) and the default rmt ISR, which should be much more
resilient against future esp32 SoC changes.
In addition to exposing additional configuration settings, it now also
provides access to the wifi station power-saving control.
Documentation updated, and wifi.sta.getconfig() has been documented. Not
sure why that wasn't already the case.
By returning result as a signed 32-bit int between INT32_MIN to IN32_MAX
which is represented the same regardless of 64-bit support or
integral-only builds.
Also updated docs, fixed links and clarified behavior of random APIs
when WiFi isn't started.
The modern spiffs backend doesn't like stat("./somefile") for something
on the root of the filesystem, and instead only accepts "somefile"
(it also doesn't like "/somefile"). The error from stat was being
ignored which is why the file sizes all appeared to be zero.
The fix is to change file.list() to pass just the filename, unless a
directory was passed to list(). Also improved error handling a bit.
Slightly reworked embed_lfs.sh to better cope with attribute size changes
in future compiler versions, without needing to be updated again.
RMT register naming changed once again...
If this variable is not set in the config it may contain random data and set the clock source to the REF_CLK
resulting in timing errors, the DHTx, DS18B20 and ws2812 devices to not communicate.
The return value from fwrite was being checked against the size of the data rather than the number of bytes written.
This caused node.compile() to falsely return failure.
Philip Gladstone
Johny Mattsson
Philip Gladstone
Mike_Went
serg3295
Johny Mattsson
Marcel Stör
Felix Penzlin
Tom Sutcliffe
serg3295
Joo Aun Saw
h2zero