00ab597773
DividerTray: Add Labels
2022-08-04 22:05:07 +02:00
99cc13b367
New generator: RegularStarBox
...
Box made from two regular polygon pieces that go together to form a star.
2022-08-03 20:44:52 +02:00
9cadd12635
changed font color to ETCHING,
...
changed font size to depend on tile size
2022-07-31 16:27:13 +02:00
05fc5aab32
New Generator: CardHolder
...
Resolves : #279
2022-07-31 00:28:13 +02:00
fc64f03eed
WallDrillBox: Move to WallMounted group
...
Force manually to fix inheritance mess
2022-07-30 20:11:21 +02:00
d1bb098540
WallEdges: French Cleats
...
Resolves : #366
2022-07-30 18:24:00 +02:00
be68061b17
DrillBox: Extend finger joints on sides to whole height
2022-07-28 22:33:33 +02:00
8076566616
DrillBox: Add support for top_edge parameter
...
with limited selection of edge types (compared to UniversalBox)
Resolves : #416
2022-07-28 22:27:48 +02:00
db1ca9e505
MountingEdge: Fix typo and default
...
for side to "back"
2022-07-28 22:26:55 +02:00
fef38c0b27
Remove HexHoles generator
...
as it is superseeded by the HolePattern generator which does more and
does better.
2022-07-24 10:57:56 +02:00
a83497758c
New generator: HolePattern
...
using the new fillHoles function.
Resolves : #31
Related: #400
2022-07-24 10:55:11 +02:00
e4c8566ce6
New generator: FillTest
...
for debugging only - just to have consistent test cases for runtime measurements
2022-07-23 09:56:25 +02:00
5169343be7
Add fillHoles() function
...
to fill a polygon with a hole pattern
2022-07-23 09:53:11 +02:00
3793a2bb09
Add regularPolygonHole()
...
to be used by fillHoles
2022-07-23 09:44:20 +02:00
4a5aee7ad7
BirdHouse: Fix the gable walls
...
Looks like edgeCorner() still doesn't work properly with angles < 90°.
Avoid issue by switching to f edges that don't need width adjustments.
Also make the roof wider
Related: #414
2022-07-19 09:27:17 +02:00
20ab2a1bed
flangedWall: Do inger holes for h edge
...
if there is a flange at that side
2022-07-19 09:25:17 +02:00
0938d12aa0
BirdHouse: Fix collision between roof and sides
...
and hole sizes in the fronts
2022-07-19 00:22:03 +02:00
777e79afc1
New generator: BirdHouse
...
Still untested
2022-07-18 22:30:53 +02:00
574f72e6e4
DividerTray: Fix height if "outside" and "bottom" is selected
...
Thanks to https://github.com/nialabert for reporting!
Resolves : #413
2022-07-12 22:13:19 +02:00
bf84ee1e73
Create slidingdrawer.py
2022-07-09 21:32:30 +02:00
13170f0306
FingerJoints: Move drawing fingers into function
...
so it can be reused by sub classes
2022-06-28 08:35:00 +02:00
c70eecd1d1
Convert given default values to proper type
...
for when converting Settings to parseargs to void the type changing by
careless new default values.
2022-06-28 08:35:00 +02:00
fd30b8b0b7
Only merge paths with the same color and width
...
Related: #353
2022-06-28 08:35:00 +02:00
73a46460ee
Platonic: Add image of Icosahedron
...
Thanks to https://github.com/YodaMaster18 for the image!
Resolves : #409
2022-06-26 16:46:41 +02:00
277e0f2c38
Rename WallMountedBox to _WallMountedBox
...
as it is an abstract class and should not appear in the list of generators.
Thanks to https://github.com/HaSHsss for reporting!
Resolves : #408
2022-06-22 22:50:57 +02:00
ad056de77f
OttoSoles: Make soles a little bit larger by default
2022-06-22 22:42:31 +02:00
e414e73bf2
RoundedTriangleEdge: Reduce default height to 50
...
Avoid height of several generators becoming negative if
RoundedTriangleEdge is selceted with default values e.g. for
UniversalBox and TypeTray. These are only 100mm hight with outside
option being enabled.
Thanks to https://github.com/SuksAE , https://github.com/HaSHsss and
https://github.com/Arcturuss for pushing this issue.
Resolves : #406
Resolves : #305
2022-06-20 08:10:07 +02:00
52ec9af104
WallDrillBox: Fix inheritance mess
2022-06-10 23:32:32 +02:00
17e527484f
DinRailBox: Move to WallMounted group
...
and improve placement and labels
2022-06-10 23:10:04 +02:00
0a32f8ed07
WallEdges: Improve char placement
2022-06-10 23:01:54 +02:00
7d7e0a5c9f
Move all Slatwall generators to new WallEdges infrastructure
...
Add "plain" and "plain reenforced" wall styles with straight back
2022-06-10 23:01:54 +02:00
362dd54e09
Move Slatwall classes to walledges
2022-06-10 23:01:54 +02:00
bfa327d83a
Don't try to add closed loops to other paths
...
This is too slow for hole patterns and the holes can't be added anywhere
anyway.
2022-06-07 08:51:25 +02:00
c289758749
CabinetHingeEdge: Fix spurious 270° corner
...
Resolves : #404 - Issue not found
2022-06-06 19:58:00 +02:00
2f59c6191b
fixed debug rectangle to be painted with ANNOTATIONS color
2022-06-05 22:37:00 +02:00
ce032e323f
reworked color handling to improve mapping with Lightburn layers
2022-06-05 12:18:51 +02:00
b864cfcd56
Fix MagazineFile for e as top_edge
2022-05-27 22:58:17 +02:00
af8a30287e
Add burn value to reference text
2022-05-27 15:16:50 +02:00
ec0d24efd2
Fix svg text alignment for "middle"
...
See https://stackoverflow.com/questions/19212498/firefox-support-for-alignment-baseline-property/21373135#21373135
2022-05-27 15:05:37 +02:00
4a339a31db
White space in comments
2022-05-27 14:53:40 +02:00
ee9fb4d7fe
TrafficLight: Add label
2022-05-27 14:53:40 +02:00
7f67bae793
MagazineFile: Add MountingEdge
2022-05-27 14:53:40 +02:00
20f45224fb
Add MountingEdge
...
and add it to top_edge.
2022-05-27 14:53:40 +02:00
e6ef17c070
Quote -- everywhere in the SVG/XML comment
...
by adding spaces inbetween. Double replace to deal with multiple dashes
in as row. Otherwise a space would be added only every second gap due to
overlapping replacements.
2022-05-15 16:06:24 +02:00
363b474b46
Add parameter "hole_dD" to .buildArgParser()
2022-05-15 10:23:14 +02:00
1bb4b8c0c3
Added pear shaped mounting hole drawing function ( #392 )
...
and add them to BinTray and TrafficLight
Add labels to the parts of these generators
Add doc strings to all hole types
2022-05-15 07:55:53 +02:00
ece304bf1f
Add labels to some generators
2022-05-14 10:35:58 +02:00
c998509a7e
RectangularWall: Add new stackable edges
...
bottom without finger holes and top with
2022-05-08 12:21:28 +02:00
aafc99b4a1
StorageShelf, TypeTray: Add stackable edge
...
with finger holes as top_edge
2022-05-08 12:20:29 +02:00
50072a18b7
Add stackable edge with finger holes to top_edge
...
standard parameter and support it in drawLid()
2022-05-08 12:18:15 +02:00
e61cbe10b8
StorageRack: Add support for stackable top edges
2022-05-04 22:20:31 +02:00
a7afc8b1b6
Add stackable top edge with finger holes
2022-05-04 22:19:35 +02:00
b4d8641fc0
TwoPiece: Add some help and another picture
...
Thanks to https://github.com/Day0Dreamer for the image.
Related: #140
2022-04-30 17:47:29 +02:00
ccb2627e8f
DrillStand: Add pictures
...
including assembling instructions.
Thanks to https://github.com/IgnorantOneTwo for providing the images!
Related: #140
2022-04-30 17:01:17 +02:00
7485e47e42
added group support to lbrn2 output
2022-04-19 21:57:58 +02:00
3d7986f130
updated list of used edge characters in documentation
...
added reserved chars for generator use
changed generator template to reserved char
2022-04-19 21:57:58 +02:00
17009eed85
WallCaliperHolder: Fix back plate
2022-04-12 21:57:59 +02:00
403361ff7c
SpicesRack: Remove debugging code
2022-04-12 21:57:59 +02:00
76384165cd
Use Python 3 style super()
...
which is simpler and less fragile.
2022-04-09 20:45:31 +02:00
94935d96bd
BottleTag: Better parameter names
2022-03-30 23:37:53 +02:00
6b6a5fd860
Initial commit of Bottle Tag generator
2022-03-30 23:30:47 +02:00
84797abc35
DividerTray: Improve Settings descriptions
2022-03-30 23:27:29 +02:00
b9dbe1d2e8
chore: small description error
2022-03-30 23:18:46 +02:00
17eb073c81
feat: DividerTray use Settings
2022-03-30 23:18:46 +02:00
e8e75765b9
fixed error generating an empty path list
2022-03-30 08:08:52 +02:00
cf99c93400
lbrn2 output: Suppress output of empty text fields
2022-03-28 21:43:48 +02:00
70c49afb57
Don't render empty part labels
2022-03-28 21:42:06 +02:00
3d2a4819ac
feat: DividerTray make the play optional
2022-03-27 22:43:49 +02:00
95e5c26b4d
refactor: DividerTray add notches in wall by default
2022-03-27 22:21:38 +02:00
6cffe5e6a8
refactor: DividerTray obsolete lines
2022-03-27 22:21:38 +02:00
d062a1e9aa
Use elif
2022-03-27 22:09:39 +02:00
f1f829d5fb
FingerJoints: Add "snap" style
2022-03-27 22:09:32 +02:00
be0aec17cf
FingerJoints: Add "barb" style
2022-03-27 22:09:32 +02:00
e8b88e53f1
add Lightburn .lbrn2 file format support
2022-03-27 22:02:44 +02:00
1362364c33
HingeBox: Remove debugging code
2022-03-27 11:30:31 +02:00
67bd25016b
DividerTray: Add a bit of play to the dividers
...
Especially the divider over the whole width can use some play for the
slots to avoid them clamping onto the walls.
Related: #374
2022-03-21 17:53:30 +01:00
3bf4be5e1d
DividerTray: Add divider across full width
...
Resolves : #374
2022-03-21 17:46:43 +01:00
b68aa5bb0f
DividerTray: Add description
...
Related: #374
2022-03-21 17:23:29 +01:00
ec6f784442
HingeSettings: Check axle for valid values
2022-03-21 12:10:12 +01:00
a7063011b5
Add inner_corner default setting
...
to allow removing the loops in inner corners
Related: #294
2022-03-20 19:04:27 +01:00
b12fded50d
Remove backslash from description
...
as it trips up gettext.
Also update language files.
Resolves : #371
2022-03-12 18:24:11 +01:00
ea4036b3d4
ArgparseEdgeType: Re-enable Inkscape format
...
Got dropped in ecf14540f5#369
2022-02-18 10:46:11 +01:00
529574fb5d
Dispenser: Fix sideedges parameter
...
Looks like both the ArgparseEdgeType machinery and the inx conversion
should be more robust...
Thanks to https://github.com/lucky62 for reporting!
Resolves : #369
2022-02-16 17:16:36 +01:00
7eca5a6c05
Slatwall Edges: Redimentary DIN rail support
...
Added type parameter to SlatwallSettings
2022-02-11 19:17:40 +01:00
b8c8a9ec8d
Fix pstoedit for non Unix OSs
...
Resolves : #362
2022-02-07 18:06:20 +01:00
048bb11b09
BinTray: Fix settings for finger joints on 45° angles
...
Previously a new settings object was created and settings in the UI were
ignored. Now the settings are copied over.
Resolves : #364
Thanks to https://github.com/leyton01 for reporting!
2022-02-06 17:35:15 +01:00
685f364290
New generator: Dispenser
...
Related: #278
2022-01-28 22:56:05 +01:00
633be86ea0
New generator: JointPanel
...
Create pieces larger than your laser cutter by joining them with Dove Tails
2022-01-28 17:05:58 +01:00
750b33a8ce
SlatwallDrillbox: longer side skirts
2022-01-27 22:53:23 +01:00
e072226aad
DrillStand: pass edges param to sidewall
...
Use sidewall() in SlatwallDrillbox, too
2022-01-27 22:53:23 +01:00
6e2e29e6ff
SlatwallDrillBox: Use finger holes to fix bottom in place
...
Otherwise all the weight of the drills is just held up by glue
2022-01-27 22:53:23 +01:00
b190a11cb4
DrillStand: Use finger holes to fix bottom in place
...
Otherwise all the weight of the drills is just held up by glue
2022-01-23 16:24:24 +01:00
28d7dc16b9
SlatwallDrillbox: Base on DrillStand to reduce copied code
2022-01-23 16:23:49 +01:00
a364f603a8
Add extra_length to Finger Joint Settings
...
to allow extending the finger joints so burn marks can be ground off.
Thanks to all who have been pushing for this feature!
Resolves : #270
2022-01-16 15:18:11 +01:00
c4038696f1
BayonetBox: Minor punktuation fix
2022-01-11 09:09:32 +01:00
9f4657cc64
RegularBox: Improve defaults and docs
...
Reduce surroundingspaces as it is likely that fingers won't fit for
small boxes or one with many sides.
Also add proper description instead of inheriting the one from bayonet
box directly.
2022-01-11 09:07:09 +01:00
d29c8f7138
Consistent units for standard parameters
2022-01-09 16:20:58 +01:00
e28976d5e3
Add doc link for tabs param
2022-01-07 22:22:03 +01:00
b7b74ab27f
Settings: Add "multiple of thickness"
...
where appropriate. Before that not indication on what the numbers
actually mean were given.
2022-01-07 22:22:03 +01:00
72a111a100
Shorten parameter descriptions to fit in one line
...
The additional information is now available via help link to the user
documentation.
2022-01-07 22:22:03 +01:00
83fc970d7c
New generator: ABox
...
A simple box that is easier to use for beginners than the UniversalBox
Related: #356
2022-01-07 22:22:03 +01:00
0b3a0506d7
CardBox: Further improve description
2022-01-05 21:34:15 +01:00
4544bc3009
RoundedBox: Add Dove Tail Settings
2022-01-05 18:29:29 +01:00
5810314331
DoveTailEdge: Fix edge without dove tails
2022-01-05 18:29:09 +01:00
260633d9cd
PaperBox: Format description properly
2022-01-03 15:23:26 +01:00
9b0c842522
Fix docstring formatting
2022-01-03 13:42:40 +01:00
acf4e81159
Add links to documentation to web UI
...
for some of the parameters
2022-01-03 13:30:43 +01:00
4ba1768d29
Treat all parameter descriptions as markdown
...
in the web UI
2022-01-03 13:29:12 +01:00
d5654137a4
RoundedBox: Allow arbirtary horizontal layers
...
by changing h param to sh.
Also surroundingWallPiece to get the dimmensions of each section in the
surrounding wall.
Resolves : #339
Thanks to Florin Furdi for the idea!
2022-01-02 13:48:32 +01:00
ff6a2b955a
CardBox: Put lid pieces together
...
to make it easier to understand that goes together
2022-01-02 12:11:56 +01:00
0c023f2e5f
Paperbox: Add second design better suited for smaller lids
...
Based on discussion in #351
Suggested by and co-developed by https://github.com/fuddl
2022-01-02 12:11:14 +01:00
fdc8618900
Cardbox: point to the right picture in description
2022-01-02 11:08:49 +01:00
9a98a50506
DrillBox: Move to Tray group
2021-12-15 14:18:17 +01:00
bfe39861fa
DrillBox: Make layers adjustable
...
Now one can have any number of layers at any height. This may make the
generator useful for other application with custom hole patters on
different height. It also allows deleteing holes for short drills on the
lower layers.
Thanks to https://github.com/KittyDreadful for suggesting this!
Related: #339
2021-12-15 14:18:17 +01:00
9b0ebad0e7
DrillBox: Make bottom edge configurable
2021-12-15 14:18:17 +01:00
68e0bae6a9
DrillBox: Set finger joint details as defaults
...
instead of hard coding them
2021-12-15 14:18:17 +01:00
866714ef7e
Fix Typo
2021-12-14 22:20:56 +01:00
b11f9b0f1a
BinTray: Fix finger holes in side walls
...
Pattern was mirrored before.
Resolves : #348
Thanks to https://github.com/Al0rin for reporting!
2021-12-04 18:52:31 +01:00
ee2baab396
flangedWall: Allow other edge types
...
for sides without flange. Support "e" edges for sides with flanges
(along with "E" and "F")
Resolves : #347
2021-12-04 16:02:25 +01:00
ad1be4c361
Fix placement of rectangularTriangle(s)
...
That was broken by fcefddca1eResolves : #346
Thanks to Guillaume Collic for reporting!
2021-12-01 23:37:02 +01:00
8b791b32b6
TypeTray: Use h edge for sides if back_height is set
...
Better support pulling forces if tray is screwed to a wall.
2021-11-17 17:58:13 +01:00
a0f8fdd975
TypeTray: Fix front when back_height is set
...
Side edges did not fit into side walls.
Resolves : #336
Thanks to https://github.com/RestlessRabbits for reporting!
2021-11-17 17:58:13 +01:00
4319b704dd
DrillBox: Fix holes diameter
...
by removing radius vs diameter mixup
Resolves : #338
Thanks to https://github.com/KittyDreadful for reporting!
2021-11-08 14:06:24 +01:00
62b30e3d88
fix some typos with codespell
2021-11-03 15:34:38 +01:00
40e56bf26f
TypeTray: Add back_height parameter
...
to allow mounting space similar to SlatwallTypeTray
2021-10-30 22:01:36 +02:00
c3faa8f5a8
Folder: Add settings tab for flex
...
Remove unused Fingerjoint Settings
2021-10-24 23:19:17 +02:00
fce7e08a1a
Adjust line width in transform()
...
Pass scale param down the transform call tree.
This fixes the inner corners for the PS output which were seen as "too
big" when comparing with the wrong line width.
Resolves : #332
2021-10-09 13:59:24 +02:00
cbbe8c11cc
Shutterbox: More pictures
...
Thanks to Taylor Williams (https://github.com/tzwilliams )!
2021-09-26 17:33:29 +02:00
d6c8d965c3
RoundedBox: More pictures
...
Thanks to Taylor Williams (https://github.com/tzwilliams )!
2021-09-26 17:04:18 +02:00
a2678de3e2
SilverwareBox: Fix edge of surrounding wall
...
and remove bogus arc holes at the corners
2021-09-21 23:02:47 +02:00
f6fa4967ab
surroundingWall: Fix size calculation
...
Resolves : #297
2021-09-21 23:01:53 +02:00
fcefddca1e
rectangularTriangle: Improve spacing
2021-09-21 22:52:10 +02:00
aad270e67e
The Royal Game of Ur Images
2021-09-19 20:37:29 +02:00
eb84f0e0ac
rectangularTriangle: Fix placement
...
Resolves : #308
2021-09-19 16:52:29 +02:00
8030faadd6
rectangularTriangle: Fix outset edges in hypothenuse
2021-09-19 16:50:39 +02:00
cd604f0d53
CardBox: Fix height
...
Previously box was one thickness to low as the height of the lid was not
accounted for.
Thanks to hd (https://hackaday.io/hacker/1210037-hd ) for pointing this
out!
2021-09-03 13:59:11 +02:00
44cf852fac
Openbox: Add edgetype parameter
2021-07-18 15:37:04 +02:00
064cd71cd5
OpenBox: Remove unused bedbolt parameters
2021-07-18 15:37:04 +02:00
2154245cde
AngledBox: Render surrounding walls in order
2021-06-27 16:24:01 +02:00
a35674a736
Add labels to Cardbox
...
Added labels to CardBox
Also rearange some parts to make labels easier to read
2021-06-27 16:07:58 +02:00
c0eca5ea5f
Add labels to boxes
...
Added labels to AngledBox, BasedBox, ClosedBox, Console2, DinRailBox,
DisplayCase and ElectronicsBox
2021-06-27 16:07:58 +02:00
6238903237
Gears: Use proper metric module
...
with diameter / #teeth instead of circumference / #teeth.
Thanks to nialabert (https://github.com/nialabert ) for pointing this
out!
Resolves : #260
2021-06-26 10:58:25 +02:00
9cb038ef0a
Quote cli in meta data to not contain line breaks
...
Resolves : #327
2021-06-25 22:13:13 +02:00
3ff0df504b
DoubleFlexDoorBox: Add picture
...
and move out of Unstable.
Thanks to Targor (https://github.com/targor ) for the idea and image
Resolves : #322
2021-06-13 09:23:37 +02:00
2538f2fef3
Add optional "finger hold" to the sliding lid, present if "hole_width" > 0.
...
Also:
* add comments for the sliding lid parameters
* move groove-cutting logic to helper methods
Example usage:
scripts/boxes UniversalBox --bottom_edge=F --top_edge=L --Lid_spring=none --Lid_style=springs --x=100.0 --y=100.0 --h=100.0 --reference=0 --thickness=3.0 --Lid_hole_width=20
2021-06-12 11:46:37 +02:00
4df9c4aae9
Add labels to Ottobody
...
Using the label interface, render identifying labels on the Ottobody
2021-06-11 22:29:59 +02:00
2d262dacdd
Allow labeling of parts
...
Add a parameter label to rectangularWall(), flangedWall(),
rectangularTriangle(), trapezoidWall(), trapezoidSideWall() that is rendered
in red to identify parts, it is not ment to be cut or etched.
Added --labels flag to enable/disable rendering of labels.
Resolves : #316
2021-06-11 22:29:23 +02:00
ef94daa006
Add mouseover images for most groups
...
Resolves : #253
2021-06-05 18:25:53 +02:00
9a46882c8f
Add color selection to all holes
...
All methods that uses the holeCol decorator now take a parameter color.
Added semantic symbols for colors.
2021-06-03 21:40:11 +02:00
c86ae75712
Parametrizise the drillbox
2021-06-03 21:40:11 +02:00
suks.ae
Florian Festi
HaSHsss
SuksAE
Shaun
Guillaume Collic
iooner
Mateusz Konieczny
0xfab1
jens persson
Marcin Zukowski