c9cf02ba31
Send any queued packets when possible
2016-02-01 22:29:32 -05:00
fcb14a33b3
Merge pull request #987 from DiUS/enduser_enhanced
...
Enhancements to enduser_setup module
2016-02-02 00:39:47 +11:00
86839d6e71
Fixes and enchancements for enduser_setup module.
...
Fixes:
* Removed spurious \0 bytes being sent to the client in many cases.
* Properly terminated 404 header.
* Now including Content-length: header for index.html (including built-in).
Clients otherwise had to wait for their own timeout before considering
the page load complete, which resulting in an unpleasant sluggish
experience.
* Switched form submission to GET, as iOS sometimes does not include the
body in the same packet as the POST header, which led to the module
not finding the form values.
* Added redirect after form submission to avoid blank-page-in-browser.
* Moved common "enduser_setup" prefix to a lua_pushfstring() to reduce
string literal overhead.
* Replaced cached lua_State* with calls to lua_getstate(), as in other
modules.
* Fixed broken appending of MAC to the SSID.
* Fixed up macro definitions to not break `if` clauses unintentionally.
Enhancements:
* Support for scanning for available WiFi networks, and picking from the list.
* Support for retrieving the current WiFi station status.
* Added "manual" mode, where the module does not (re)configure the AP setup,
nor shut down automatically. Default is still automatic, as before.
* Updated docs for new `enduser_setup.manual()` function.
2016-02-01 14:42:24 +11:00
76b28c1f74
Simple mdns implementation using the Espressif code
2016-01-29 21:37:19 -05:00
8db93bcabf
make delay optional
2016-01-29 18:52:38 +01:00
3a597f1698
implement architecture dependent delay functions for esp8266 port
2016-01-29 18:52:38 +01:00
1c32d20502
improve error checking in mqtt module
...
connect(), close(), subscribe(), publish()
2016-01-28 21:36:38 +01:00
9fd215b028
Corrected sprintf() prototype & behaviour.
2016-01-28 17:56:01 +11:00
74d27b3486
Merge pull request #968 from devsaurus/crypto_http_mqtt_lua-gnu11
...
Enable -std=gnu11 for crypto, http, mqtt, and lua dir
2016-01-28 17:36:27 +11:00
edbcbe1b0f
Fixed issue where default ESP_xxxxxx SSID was appearing for enduser_setup
2016-01-27 10:24:10 -05:00
9741f2c678
Merge pull request #977 from vowstar/fixed-http-1-1
...
Fix HTTP response bug while server only support HTTP/1.0
2016-01-27 10:51:48 +11:00
6ef7ece046
Cleaned up APA102 module registration.
2016-01-26 17:14:19 -05:00
1a20f2eda8
Fix HTTP response bug while server response HTTP/1.0
...
Signed-off-by: Huang Rui <vowstar@gmail.com>
2016-01-26 16:06:11 +08:00
0f3c0ffbb0
Added support for the APA102 LED.
2016-01-25 20:54:27 -05:00
5e2eb3588c
Fix redefine bug on some other version SDK(such as espressif's lubuntu environment)
...
Signed-off-by: Huang Rui <vowstar@gmail.com>
2016-01-25 03:06:18 +08:00
cd06905b58
include user_interface.h to avoid implicit decls
2016-01-24 00:22:11 +01:00
f149b60c7f
enable -std=gnu11 for lua dir
2016-01-24 00:02:27 +01:00
b3b50646ef
enable -std=gnu11 for mqtt dir
2016-01-23 22:42:55 +01:00
19fda87e33
enable -std=gnu11 for http dir
2016-01-23 22:41:41 +01:00
8befcf0888
enable -std=gnu11 for crypto dir
2016-01-23 22:36:35 +01:00
91b2533aa6
Merge pull request #965 from devsaurus/platform-gnu11
...
Enable -std=gnu11 for platform and driver dir.
2016-01-24 01:23:27 +11:00
85bd7bbeda
Merge pull request #951 from Alkorin/ws2812-uart
...
Rewrite ws2812 serialization code to use UART1 instead of bit-banging.
2016-01-23 10:42:56 +00:00
9f54c8f5d4
enable -std=gnu11 for driver dir with corrected os_printf* decls
2016-01-23 11:22:03 +01:00
0c3fc6cc78
enable -std=gnu11 for platform dir
2016-01-22 23:21:34 +01:00
3b589e2177
Merge pull request #958 from DiUS/modules-gnu11
...
Enable -std=gnu11 for modules dir.
2016-01-22 23:20:29 +01:00
0cd287e67b
Added -Wimplicit to modules build.
...
Plus associated fixes.
2016-01-22 10:55:57 +11:00
a4e7885a6e
Merge pull request #923 from DiUS/spiffs-alignment-fix-915
...
Ugly workaround for broken SPIFFS GC alignment.
2016-01-20 09:48:47 +00:00
182d45f928
Enable -std=gnu11 for modules dir.
...
Plus boat-load of fixes to actually make that build.
2016-01-20 19:40:47 +11:00
5b381d2f1e
Added AES support to crypto module.
...
Merely a wrapper around the (undocumented) internal SDK AES functions.
2016-01-19 15:19:11 +11:00
47b44229bf
ws2812 data buffer
...
To create a size led long buffer:
buffer = ws2812.newBuffer(size);
To fill the buffer:
buffer:fill(g, r, b)
To get a particular led color:
g, r, b = buffer:get(index)
To set a particular led color:
buffer:set(index, g, r, b);
To send the buffer:
buffer:write(pin);
2016-01-18 17:21:08 +01:00
51bb8a50ba
Rewrite code to use UART1 instead of bit-banging.
...
It allows keeping interrupts enabled but force to use GPIO2.
2016-01-18 17:16:18 +01:00
82b19c4c37
Merge branch 'newdocs' into dev
2016-01-17 14:23:13 +01:00
7e8c54890f
Merge pull request #878 from dnc40085/dev_wifi_sta_Xethostname
...
Add functions: wifi.sta.sethostname and wifi.sta.gethostname
2016-01-15 08:56:37 +00:00
52e121f469
Merge pull request #887 from vowstar/dev-all-in-one
...
Add HTTP client module and documents.
2016-01-15 17:44:41 +11:00
30f8f62420
Optimized node.bootreason() for size.
...
Reduces the size from 179 to 102 bytes.
2016-01-15 11:42:20 +11:00
d426976e60
BMP085: bmp085.init() should return 0
2016-01-14 22:23:03 +01:00
dc5cc6d9f4
Add the exccause parameter into the bootreason block
2016-01-14 08:16:26 -05:00
2d82e622b6
Merge pull request #890 from vowstar/dev-fix-flash-api
...
Update flash_api due to flash size map is redefined by espressif.
2016-01-14 17:00:50 +11:00
9772e7cdec
Merge pull request #888 from dnc40085/patch-1
...
Fix problem in wifi.sta.getap where invidual result is lost.
2016-01-14 16:49:20 +11:00
bf74b617d0
SPI: Implemented CPOL=1
...
Reference: http://bbs.espressif.com/viewtopic.php?f=49&t=1570
2016-01-13 22:39:15 -05:00
dd5dafa99e
Merge remote-tracking branch 'jmattsson/tmr-libmain-binpatch150' into sdk1.5.1
...
Conflicts:
Makefile
2016-01-13 07:54:27 -05:00
1d9336fb99
Upgrade to SDK version 1.5.1 from Espressif
2016-01-12 21:05:47 -05:00
57917601b7
Expose extended reset info via node.bootreason().
2016-01-12 17:29:46 +11:00
58427563ed
Ugly workaround for broken SPIFFS GC alignment.
...
Proper fix should be done upstream and pulled in once available.
2016-01-12 17:24:02 +11:00
3fb0de859f
Range check the tmr interval value.
...
Plain SDK 1.5.0 bugs out for values >6871948 or so - this commit does
not do anything to mitigate that.
2016-01-10 18:10:03 +11:00
0b2d90300a
Remove left-over cruft regarding Lua mem opt.
2016-01-06 10:38:58 +11:00
c2f2bbd92a
Fix problem in wifi.sta.getap where invidual result is lost.
2016-01-03 20:02:50 -08:00
fcbf58cf0d
Rewrote wifi_sta_gethostname in wifi module.
2016-01-02 19:43:40 -08:00
b2190e4d7b
Added functions: wifi.sta.sethostname and wifi.sta.gethostname and
...
option to set hostname in user.config.h
2016-01-02 18:34:40 -08:00
cb0a982dc3
Minor change to node module
...
node.dsleep was using sint32 to hold sleep time when it should be using
uint32
2016-01-02 03:10:27 -08:00
2f655deeca
Merge pull request #885 from jmattsson/sdk150bin
...
Upgrade to SDK 1.5.0 + Espressif's Open LWIP 1.5.0.
2016-01-01 22:30:22 +00:00
f2e6c9366b
Sync flash_api.c with flash_api.h
2015-12-30 09:49:01 +08:00
7737d36f24
Update flash_api.h due to flash size map is redefined by espressif.
2015-12-30 09:46:43 +08:00
88bae3ed22
Remove all version data and combine 33 commits to 1.
...
Add http module and documention, including fix httpclient bug.
2015-12-29 19:25:37 +08:00
20629386ca
fix parameter access for ucg.getStrWidth()
2015-12-28 15:22:09 +01:00
a6c0873a28
Upgrade to SDK 1.5.0 + Espressif's Open LWIP 1.5.0.
...
Removed earlier TCP port randomisation fix - the new SDK has its own fix
even though Espressif told me they wouldn't fix it. Yay?
2015-12-23 11:17:05 +11:00
6cbe716db0
uart: fix parity and stopbit generation
2015-12-21 17:51:43 +01:00
672c396c69
Fixed compilation error when the enduser_setup module is disabled yet requires ENDUSER_SETUP_AP_SSID to be defined.
2015-12-20 22:50:36 -05:00
1462d00e9f
Merge pull request #842 from jmattsson/module-ltr-cleanup
...
Cleanup: LTR module registration
2015-12-19 23:22:18 +00:00
9003d3e8fb
Rework NODEMCU_MODULE() to not pull in extra gunk.
...
Third time lucky. I hope. Hi Terry.
2015-12-18 13:10:48 +11:00
6d82f8da9d
Merge pull request #857 from devsaurus/dev-spi_cpol
...
SPI: cpol=high is not implemented due to insufficient hw docs
2015-12-17 12:57:25 +11:00
7e02935a27
Deal with ld's overly eager discarding of globals.
2015-12-17 12:37:01 +11:00
5e9bf95ccc
cpol=high is not implemented due to insufficient hw docs
2015-12-16 22:23:04 +01:00
53ee80e3aa
Merge pull request #841 from jmattsson/flash-addr-cleanup
...
Cleanup/minor correction: Flash addr cleanup
2015-12-16 10:53:58 +00:00
fd9113124c
Corrected the 4-page alignment for start of fs.
2015-12-16 18:59:55 +11:00
4e8ef87d03
Reworked module registration, removed modules.h
...
Module creation & registration now made a lot simpler. In essence,
each module file is now self-contained and only needs a
NODEMCU_MODULE(MYNAME, "myname", myname_map, luaopen_myname);
line to both be automatically recognised by the Lua initialization
as well as honor the LUA_USE_MODULES_MYNAME #define.
2015-12-16 16:09:16 +11:00
b773290b8c
Major cleanup of module registration pass 2.
...
carrying on Johny's edits as per my comments on #810
2015-12-16 11:21:40 +11:00
5cb27f89ae
Add ImageMagic info.
2015-12-15 09:35:20 +03:00
6009602382
Some polish
2015-12-14 11:41:10 +03:00
4b0cec1757
* Add u8glib readme.
2015-12-14 11:34:11 +03:00
0386ae6559
Merge pull request #804 from DiUS/panic
...
Do not allow execution to continue after a PANIC
2015-12-12 15:36:00 +00:00
6b6456be47
Major cleanup of module registration.
...
As per #810 & #796 , only LUA_OPTIMIZE_MEMORY=2 & MIN_OPT_LEVEL=2 are
supported when building. This commit effects that limitation.
With this change modules/auxmods.h no longer needs to be updated for
every new module, nor do module writers need to cater for a hypothetical
LUA_OPTIMIZE_MEMORY < 2 scenario.
2015-12-12 15:03:40 +11:00
d84a24fc9a
Proper cached-flash to phys address translation.
2015-12-12 13:20:22 +11:00
c4e8b04fbf
Cleaned up all uses of INTERNAL_FLASH_START_ADDRESS.
...
There was only one genuine use of this macro, all other places were
using it only as a necessary compensation. While this was fine as long as
it was the first meg of flash which was mapped, it became incorrect and
quite dangerous whenever this assumption did not hold (such as when
running from the second slot in an OTA scenario).
The flash API now uses actual addresses, not translated/mapped
addresses, and the users of this API have been adjusted accordingly.
This makes the flash API work correctly regardless of what flash mapping
is in use.
The old macro is still available under the new name
INTERNAL_FLASH_MAPPED_ADDRESS, and this is used to detect flash writes
where the source is mapped flash (and thus has to be bounced), and to
adjust the _flash_used_end linker symbol when used with
flassh_find_sector() by the filesystem code. The latter usage is not
OTA-proof, but in an OTA scenario the filesystem needs a fixed location
anyway and thus would not use this code path.
2015-12-12 13:20:22 +11:00
e9ee9a57d1
Remove the lobject.c:88 assertion failures
...
When lua assertions are enabled, normal operation results in many:
lobject.c:88: (((t1)->tt) == 4)
lobject.c:88: (((t2)->tt) == 4)
lobject.c:88: (((t1)->tt) == 4)
lobject.c:88: (((t2)->tt) == 4)
lobject.c:88: (((t1)->tt) == 4)
lobject.c:88: (((t2)->tt) == 4)
It comes from using the pvalue() macro for 3 pointer types, where
pvalue() also checks the type of pointer and complains through the
assertion where the type == 4 (TLIGHTUSERDATA).
Use the correct macro according to the type of data being compared
to eliminate this assertion error.
Signed-off-by: Nick Andrew <nick@nick-andrew.net>
2015-12-06 01:42:29 +11:00
e71a2dd64a
Fix ECG case in concat where stack top not recalculated
2015-12-03 19:16:30 +00:00
32b2911263
Merge pull request #746 from DiUS/vdd33
...
Remove adc.readvdd33() limitation.
2015-12-01 23:37:53 +00:00
e9e2efc443
Merge pull request #794 from btsimonh/btsimonhdev
...
Added uart.alt(n) to swap to use alternate rx/tx lines.
2015-12-01 21:35:09 +11:00
6acd91810f
Merge pull request #776 from askainet/net_dns
...
Make net.dns.resolve and net.dns work with an IP address as the hostname
2015-12-01 21:24:05 +11:00
0fbf442158
Do not allow execution to continue after a PANIC!
...
It really does not improve things...
2015-12-01 18:11:38 +11:00
b2345857e9
Added uart.alt(n) to swap to use alternate rx/tx lines.
...
if n = 0 -> std pinout.
if n != 0 -> alternate pinout (gpio13 and gpio15)
2015-11-28 22:51:01 +00:00
33e41a633e
Merge pull request #787 from TerryE/dev-onewire
...
Merge Onewire changes from Master into Dev
2015-11-24 11:05:40 +11:00
455f0f2166
Merge pull request #779 from askainet/sntp_dns
...
Make sntp.sync work with DNS hostnames
2015-11-24 11:03:37 +11:00
583049f620
Merge Onewire changes from Master into Dev
...
Master contained two OW changes one of which was already reimplemented in dev using the
correct macros. The second was from hazarkarabay (f6d0c0c
2015-11-23 01:23:41 +00:00
1c2fad5330
re-add detection of CR as newline
2015-11-22 13:00:40 +01:00
b216e6a809
Merge pull request #777 from devsaurus/dev-cr
...
Skip CR in interactive mode
2015-11-20 22:56:12 +01:00
7460f034ea
Merge pull request #780 from marcelstoer/dev-order-modules-list
...
Order modules list alphabetically
2015-11-19 23:47:21 +00:00
6674a7d7f9
Add reference to HX711 documentation to source
2015-11-19 22:54:06 +01:00
5b00d02bf2
Order modules list alphabetically
2015-11-19 22:48:05 +01:00
d96383691f
Make sntp.sync work with DNS hostnames
2015-11-19 21:51:33 +01:00
69f3a6f177
skip CR in interactive mode
2015-11-18 22:07:53 +01:00
4ff9e6cc01
Make net.dns.resolve and net.dns work with an IP address host to resolve
2015-11-18 21:22:58 +01:00
a272491502
Make net.dns.resolve and net.dns work with an IP address host to resolve
2015-11-18 20:58:33 +01:00
98d0157283
Merge pull request #755 from robertfoss/dev
...
Added fix from #750 , to access the IP of a sender of a UDP packet, to fix SDK 1.4.0 compability.
2015-11-17 17:51:03 +11:00
5a199e6e63
Merge pull request #751 from lukaszo/ct
...
Allow to set content type in COAP (fix #658 )
2015-11-17 12:17:11 +11:00
d19c350ead
Added fix from #750 , to access the IP of a sender of a UDP packet, to fix SDK 1.4.0 compability.
2015-11-11 23:46:26 -05:00
1e3c231630
Fix esp_init_data_default inconsistencies.
...
Make ADC vs readvdd33 option user_config.h configurable for the init data,
and made readvdd33 the default.
2015-11-12 12:57:07 +11:00
340edbbe2f
Merge pull request #750 from lukaszo/coap-deb
...
Fix sending CoAP UDP response using new SDK 1.4.0
2015-11-12 10:41:37 +11:00
3a5e845b29
Allow to set content type in COAP ( fix #658 )
2015-11-11 12:52:13 +01:00
7ef1711e9a
Merge pull request #740 from Alkorin/ws2812
...
Better timings for WS2812 (measured 345ns/695ns, instead of 340ns/600ns)
2015-11-11 21:09:31 +11:00
63fad194e2
Merge pull request #731 from dnc40085/dev_wifi_sleep_update
...
Update function wifi.sleep
2015-11-11 17:10:10 +08:00
982be36aab
Fix sending UDP response using new SDK 1.4.0
2015-11-11 00:53:02 +01:00
ad99c016cd
Merge pull request #729 from DiUS/tcp-port-rand
...
Fix to do TCP port number randomization at boot.
2015-11-10 21:57:01 +00:00
4fd552fcaf
Better timings for 160MHz too.
...
Values measured:
@80MHz:
T0H: 337ns, Period: 1.274us
T1H: 687ns, Period: 1.25us
@160MHz:
T0H: 349ns, Period: 1.262us
T1H: 700ns, Period: 1.276us
2015-11-10 22:34:44 +01:00
dabfe83a7d
Unbreak build from #735 merge.
...
Now with more #ifdef.
2015-11-10 18:48:39 +11:00
27eed629e7
Remove adc.readvdd33() limitation.
2015-11-10 15:30:59 +11:00
7512e628b6
Merge pull request #742 from TerryE/dev-stripdebug
...
Port of strip debug patch to the SDK 1.4-baseline dev
2015-11-10 12:20:36 +11:00
cfae4cdc4e
Merge pull request #735 from karrots/mqtt_close_disconnect
...
mqtt:close() send the DISCONNECT message (fix #673 )
2015-11-10 12:08:16 +11:00
382eea5079
Fix building with DEVKIT_0_9 defined.
...
This got broken in the 1.4.0 overhaul, mea culpa.
2015-11-09 12:15:40 +11:00
83d06b667d
Port of strip debug patch to the SDK 1.4-baseline dev
2015-11-08 23:46:08 +00:00
c2f12a3b05
Better timings for WS2812 (measured 345ns/695ns, instead of 340ns/600ns)
2015-11-08 22:45:12 +01:00
b2167bdf3a
mqtt:close() send the DISCONNECT message ( fix #673 )
2015-11-06 07:32:04 -07:00
51046fd78b
Minor change to wifi.sleep
...
Remove unnecessary code
2015-11-06 05:10:24 -08:00
c39d317b2b
Fix mqtt connection closing when not publishing ( fixes #359 )
...
should not reset keep_alive_tick when receiving as this can prevent
sending keepalive (PINGREQ), which can result in server disconnect.
2015-11-05 20:21:53 -07:00
5d28de8595
Merge pull request #722 from TerryE/luac-cross.2
...
Moving luac cross from master to dev
2015-11-06 09:49:38 +11:00
5e95f48a55
Update function wifi.sleep to return any error codes to user
2015-11-05 13:51:42 -08:00
f82415f6b9
Fix to do TCP port number randomization at boot.
...
This addresses the issue where a server would otherwise reject a valid
connection attempt from a rebooted node, due to the server thinking that
packet belonged to a recently closed session. By starting off the local
TCP port numbers at random* points each boot the risk of port reuse
across a reboot is significantly reduced.
*) As random as can be had via the lower 12 bits of the ccounter.
2015-11-05 14:40:57 +11:00
3da57dc85c
Merge pull request #725 from dnc40085/dev_wifi_toggle
...
Add function wifi.sleep
2015-11-05 10:07:32 +08:00
75849f79ab
Fix compiler warning in tmr.c
...
Fix compiler warning: implicit declaration of function 'system_soft_wdt_feed'
2015-11-04 17:55:09 -08:00
91ba22a49d
Minor change
...
Added static keyword to a variable
2015-11-04 06:37:57 -08:00
d6cc6d3e68
added wifi table entry for NULLMODE
2015-11-03 18:06:41 -08:00
5c1c51642e
Fix newly introduced incorrect WDT feeding.
2015-11-04 12:46:37 +11:00
4387f90339
Added function wifi.sleep
2015-11-03 17:23:43 -08:00
0beee5c1ae
Minor tweaks to luac.cross for SDK 1.4 support
...
plus Add extra logic to handle different loci path in luac.cross
for handling 32 bit or great hex integers Also add a helpfull hint in the
build tool to point out the Lua and lfs depencencies.
2015-11-03 22:45:43 +00:00
307323d1ff
Add luac.cross capability to nodeMCU
2015-11-03 21:37:14 +00:00
a08626d84f
Add minimum debug library providing traceback() and getregistry() functions
2015-11-03 21:34:42 +00:00
e2dd98ba10
Update mqtt.c fix for #679
...
Patch for "mqtt LWT qos and retain parameters are parsed incorrectly #679"
2015-11-02 20:14:43 -07:00
95e2bbb0f0
Merge pull request #688 from karrots/mqtt-puback-fix
...
Fix for MQTT PUBACK loop
2015-11-01 14:34:12 +08:00
a38fbdbf51
Merge pull request #713 from christakahashi/hx711-support
...
Added support for the hx711 load cell ADC.
2015-11-01 14:31:12 +08:00
3e0a3e992e
Merge pull request #717 from karrots/feature/baudrate_define
...
Add #DEFINE to user_config.h to enable easier bit rate selection.
2015-11-01 14:30:57 +08:00
66e65bd3c1
Add #DEFINE to user_config.h to enable easier bit rate selection.
2015-10-31 19:47:11 -06:00
dffbfacd46
most users won't need this so it should be off be default
2015-10-30 23:31:45 -07:00
57c2e6eacd
Fix for MQTT PUBACK loop
...
Conflicts:
app/modules/mqtt.c
2015-10-29 20:02:08 -06:00
52d6be5299
Merge pull request #705 from devsaurus/dev-fdplx
...
Update full-duplex for SPI module
2015-10-28 23:36:39 +01:00
9444ae28df
simplify spi api
...
duplex_mode configuration enables/disables receiving with spi.send()
spi.send_recv removed
2015-10-27 23:30:33 +01:00
38b494c07e
Merge pull request #702 from devsaurus/dev-fdplx
...
Add full-duplex support to SPI module
2015-10-27 14:34:13 +08:00
b535be7ab8
Fix WDT resets during file.format().
...
With the new SDK soft-wdt it is no longer sufficient to tickle the hardware
watchdog, so all (found) instances have been changed to system_soft_wdt_feed().
2015-10-27 14:33:22 +11:00
0ba0370b87
fix construction of table
2015-10-26 22:40:11 +01:00
d46bc5cc1f
align spi_recv to platform_spi_send_recv
2015-10-26 22:39:33 +01:00
7d77398921
introduce full/half duplex transactions and add spi.send_recv()
2015-10-25 22:58:06 +01:00
c223ecfe5f
Merge pull request #693 from devsaurus/dev-hspi_apiext
...
Extend SPI module API with improved transaction handling
2015-10-21 22:33:08 +02:00
75488639eb
make spi.send() transparent for 32 bit data
...
accept negative values as u32
2015-10-19 23:01:59 +02:00
7ac9a46c40
support secure connection based on CLIENT_SSL_ENABLE
2015-10-18 23:04:40 +02:00
a6eb5ccb80
improved default handling of clock_div and databit length
2015-10-18 11:37:17 +02:00
26f4bc7957
ensure backwards compatibility of exising api functions
2015-10-18 11:13:57 +02:00
19092712e5
remove obsolete spi_mast_send and rename platform_spi_send
2015-10-18 11:13:56 +02:00
28a04cc9c1
remove obsoleted constants for databit length
2015-10-18 11:13:56 +02:00
f238673772
rework of (H)SPI API
2015-10-18 11:13:55 +02:00
9cde0bbb83
add SPI transaction support
2015-10-18 11:13:55 +02:00
5ab8de34e7
Fix adc.readvdd33
...
Replace undocumented readvdd33 function with SDK function system_get_vdd33
2015-10-17 15:47:17 +02:00
340ef8fc0a
Merge pull request #636 from karrots/mqtt-clean-session
...
Added mqtt clean session support.
2015-10-17 20:58:06 +08:00
8fba0f47de
Make UDP server work again after 1.4.0 API changes.
2015-10-15 12:14:27 +11:00
afdd9430e0
Removed old lwip include file.
2015-10-12 15:57:24 +11:00
f54264669b
Fixed includes after LWIP 1.4.0 upgrade.
2015-10-12 14:31:52 +11:00
5d5be35633
Upgraded LWIP to 1.4.0 released from Espressif.
...
Plus directly provided patch for user_interface.h.
2015-10-12 14:31:04 +11:00
711d464a2b
Re-enabled open source LWIP.
2015-10-12 13:26:05 +11:00
a161f882ae
Espressif-provided fix for open source LWIP on 1.4.0.
2015-10-12 13:26:05 +11:00
dec159bce1
Support for fixing the filesystem location.
...
To assist with testing new SDK.
2015-10-12 13:26:05 +11:00
bf8ed500bf
Moved node.key() & node.led() support into node module.
...
It was piggybacking on the Lua readline timer which no longer exists.
Also cleaned up injection of Lua commands via CoAP & node.input().
2015-10-12 13:26:05 +11:00
fe6289a6c2
Switch Lua input to event driven instead of polled.
...
The Lua input timer has been the thorn in the side which prevents a lot of
potential sleeping, unnecessarily.
2015-10-12 13:26:05 +11:00
67a711931a
Switch to SDK LWIP until issues with the open one can be resolved.
2015-10-12 13:26:05 +11:00
e905c24dcc
Removed unsused, now incompatible SSL code.
2015-10-12 13:26:05 +11:00
21c4e11020
Enable dynamic build dates, plus print SDK version.
2015-10-12 13:26:05 +11:00
30380f6cff
Further cleanup of ld directory.
...
Renamed the main linker script to make it clear it is customised for NodeMCU
and not to be confused with the standard linker SDK linker scripts.
Changed to using the eagle.rom.addr.v6.ld file from the SDK.
2015-10-12 13:26:04 +11:00
7d0b13df81
Bumped version string to stop confusing myself.
2015-10-12 13:26:04 +11:00
8bdde6e28d
Sorted out linker scripts & options.
...
Now boots to Lua prompt, but promptly reboots itself before input.
2015-10-12 13:26:04 +11:00
91ee5c088c
Wifi module update to new smartconfig API.
...
Needs testing.
2015-10-12 13:26:04 +11:00
38cc84d2fc
Removed gpio pulldown references.
...
The ESP never supported internal pulldowns, and the SDK now matches reality.
2015-10-12 13:26:04 +11:00
f1552605d9
Change os_update_cpu_freq... to ets_update_cpu_freq...
...
Again, the os_xxx version has been removed from the SDK.
2015-10-12 13:26:04 +11:00
d2ac5f1712
Changed os_intr_xxx to ets_intr_xxx.
...
The os_intr_xxx macros no longer exist in the SDK.
2015-10-12 13:26:04 +11:00
3b9a42e254
Updated #includes to work on new SDK.
...
Both "c_types.h" and "lwip/ip_addr.h" don't get included indirectly anymore.
2015-10-12 13:26:04 +11:00
cc220d9201
Moved TEXT_SECTION_ATTR macro to its own header.
2015-10-12 13:26:04 +11:00
8dff84e0a2
Missing file from the LWIP upgrade/import.
2015-10-12 13:26:04 +11:00
c674d191e4
Upgraded open-source LWIP.
...
From Espressif's lwip_open_src_template_proj_for_v1.3.0.zip
2015-10-12 13:26:04 +11:00
c1cd58e096
Build using 1.4.0 SDK + remove old SDK includes/libs.
...
Leaving the linker scripts intact for now, as they're quite customised.
2015-10-12 13:00:38 +11:00
140bcee2e0
comment cleanup
2015-10-08 20:44:19 -07:00
cf079fa333
Basic hx711 functionality
2015-10-08 20:34:24 -07:00
093a895980
Merge pull request #678 from devsaurus/dev-hspi_clockdiv
...
Add divider for arbitrary HSPI clock frequencies, resolves #674
2015-10-06 21:05:17 +02:00
5e19b8488f
Merge pull request #644 from robertfoss/enduser_setup
...
Added ENDUSER_SETUP module.
2015-10-05 19:18:18 +11:00
4cf5f37450
address SPI_CLKDIV_PRE requirements
...
* respect N-1
* avoid range overflow
2015-10-04 16:57:50 +02:00
ac50f9c6a5
add divider for arbitrary HSPI clock frequencies
2015-10-04 00:40:21 +02:00
8683ea4f1b
Fixed previous POST patch. Also cleaned up HTTP request handling.
2015-10-01 14:22:45 -04:00
90f770412d
Switched from HTTP GET to HTTP POST.
2015-09-30 14:11:43 -04:00
ee82b2ad12
Moved SSID define to user_config.h
2015-09-30 13:24:18 -04:00
721fadfd14
Changed SSID to be suffixed by MAC.
2015-09-27 14:02:25 -04:00
a15097659b
Disabled enduser_setup module
2015-09-19 15:22:01 -04:00
cd85e50e73
Added support for connected, error and debug callbacks.
2015-09-19 15:06:56 -04:00
a6c9ba8004
disable UCG module per default
2015-09-17 22:43:59 +02:00
154b456f11
extend ucg example with ST7735 display
2015-09-17 22:37:31 +02:00
db1162015d
prefix local routines in ucg_polygon
2015-09-17 21:53:49 +02:00
a2bca463a0
establish parametrization via ucg_config.h
2015-09-17 21:53:48 +02:00
fde4843a75
implement all remaining function bindings
2015-09-17 21:53:48 +02:00
f0d581223f
UcgLogo example - fix drawGlyph and drawString
2015-09-17 21:53:48 +02:00
5c93ba017e
finish GraphicsTest.lua
2015-09-17 21:53:48 +02:00
ac1b5a1173
extend ucg module
2015-09-17 21:53:48 +02:00
75041a32b5
initial setup of ucg module
...
Hello World example is working
2015-09-17 21:53:48 +02:00
9b384b4bda
fix u8g->ucg prefix
2015-09-17 21:53:48 +02:00
0f1a168525
add ucg module
2015-09-17 21:53:48 +02:00
6dc0dfc068
import ucglib v1.3.3
...
https://github.com/olikraus/Ucglib_Arduino
2015-09-17 21:53:47 +02:00
8982d370f2
Removed #define for forcing storage on flash
2015-09-17 14:30:46 -04:00
5161081c1c
Updated comment for mqtt.client parameters.
2015-09-15 23:11:20 -06:00
3d5c54cef7
Moved all debug prints into the NODE_DEBUG macro.
2015-09-14 18:43:09 -04:00
3a05c3e402
Moved CONST data to occupy flash, and remove storage instructions for functions.
2015-09-12 12:07:53 -04:00
e2ada487f3
Added ENDUSER_SETUP module.
...
The module will start a SoftAP, DNS, HTTP server acting as a captive portal.
The portal will have the SSID SetupGadget and will serve a website where
credentials for the end users WLAN can be submitted.
Once valid credentials have been submitted and used to connect to the
local WLAN this module will stop.
This module requires USE_DNS to enabled in dhcpserver.h
2015-09-10 18:40:39 -04:00
524cec539f
Added mqtt clean session support.
2015-09-05 12:54:13 -06:00
52ef3c9102
Fixed bug WIFI AUTH_OPEN #623
...
Fixed a bug which prevented from setting unprotected AP
2015-08-31 17:53:38 +02:00
537cd68078
Made device package and address configurable at runtime
2015-08-23 15:59:49 +02:00
0f6a0c59a1
Documentation update
2015-08-23 14:52:15 +02:00
fd93a09a88
Code formatting fixes
2015-08-23 02:29:52 +02:00
0caf745d8e
Improve lua API interface
2015-08-23 01:42:39 +02:00
29ee02f680
Revert version change
2015-08-22 22:34:54 +02:00
4df5d5c166
Fix channel1 reading
...
Give sensor more time to integrate (400ms => 404ms)
2015-08-22 21:43:29 +02:00
7095c42477
Attempt to fix reading of registers
2015-08-22 21:19:27 +02:00
159e9c6ace
make modulename lowercase
2015-08-22 17:55:07 +02:00
d1758aee1b
return correct number of variables
2015-08-22 17:54:26 +02:00
483dbebe24
Return error when calling functions before init
...
TSL2561_ERROR_NOINIT
2015-08-22 14:26:42 +02:00
335ea87964
Glue to integrate with nodeMCU
...
makefiles etc
2015-08-22 14:25:47 +02:00
223a1c8b86
Small change
2015-08-22 12:46:53 +02:00
6cb90ea924
First commit
2015-08-22 00:15:28 +02:00
346251dca6
1-Wire power fix, by Thomas Shaddack.
2015-08-20 11:09:12 +10:00
1287a8cdd6
BMP085: Fix B5 calculation
...
B5 was calculated with some precision loss before.
2015-08-16 11:57:12 +02:00
40111c1046
Merge pull request #600 from devsaurus/dev-node_compile
...
Add write error detection in node_compile()
2015-08-11 09:36:35 +08:00
d0e6ab38df
add write error detection in node_compile()
2015-08-11 00:08:49 +02:00
ca1bc2cb18
clean u8g
2015-08-09 16:38:08 +02:00
02294955c5
Merge remote-tracking branch 'upstream/dev' into dev
2015-08-05 21:55:35 +02:00
9d8c3a7b82
fix u8g device destructor
...
don't free unallocated memory
2015-08-05 21:52:56 +02:00
ad49c5dd3b
Merge pull request #589 from kbeckmann/pr_bmp085
...
Implemented BMP085 module
2015-08-05 23:21:03 +08:00
d97d7df8ec
Merge pull request #588 from robertfoss/dev
...
Use #if instead of #ifdef.
2015-08-05 23:20:38 +08:00
a1bb3a6ad8
Merge pull request #586 from DiUS/ram-saving
...
Reclaim ~1.5k RAM by tuning down SPIFFS cache, use dynamic DNS table names
2015-08-05 23:19:24 +08:00
00527237f9
Remove now-unnecessary alignment constraints in SPIFFS.
...
With platform_s_flash_read() now properly handling unaligned destination
buffers, there is no need to shim SPIFFS any more.
2015-08-04 16:30:58 +10:00
9f9b323fb5
Ensure flash write bounce buffer is used if source is also flash.
...
When using the flash write API, the flash is unmapped/uncached, and as
such it's not possible to source data directly from flash (e.g. string
literals).
2015-08-04 16:30:54 +10:00
1259f8d776
Deal with unaligned destination parameter to flash read
...
(Occurs e.g. when SPIFFS cache is disabled.)
Implementation mirrors the existing handling in the write path.
2015-08-04 16:30:46 +10:00
0b28056959
Implemented BMP085 module
2015-08-03 17:07:56 +02:00
579dc27ee0
Use #if instead of #ifdef.
2015-08-03 01:09:49 +02:00
c19596cae8
Merge pull request #581 from robertfoss/dev
...
Added USE_DNS define.
2015-08-02 23:40:37 +08:00
53a035411e
Merge pull request #584 from DiUS/cjson-lua-mem-wrap
...
Improvements to cjson memory handling, Note that when cjson fails a memory allocation, it leaks a bit of memory, it's possible to detect that it did fail, and schedule a restart.
2015-08-02 23:38:13 +08:00
125db6595d
Use dynamic memory for DNS table names, saving ~1k RAM.
2015-07-31 18:15:18 +10:00
4a47813e20
Reduced SPIFFS cache, freeing ~0.5k RAM.
...
Also made the cache on/off configurable via user_config.h. Uncached writes
are not a very good idea, but for read-only deployments a further ~0.5k RAM
can be gained by disabling the cache.
Tweaked the file.read() workhorse to read large chunks at a time rather
than use getc(), to compensate for potential unavailability of cache.
2015-07-31 18:15:18 +10:00
b583af94a5
Fixed long key bug in HMAC calculation.
2015-07-31 14:11:09 +10:00
eae72699d0
Fixed broken linear growth allocation in cjson.
2015-07-31 13:17:05 +10:00
595509a7f3
More sensible cjson realloc strategy.
2015-07-31 11:36:46 +10:00
719abca418
Stop cjson from killing the node on out-of-mem.
2015-07-31 11:36:46 +10:00
1b8e015f33
Removed some whitespace.
2015-07-28 16:34:25 +02:00
5822d4c4ed
Add define for advertising DNS in the DHCP OFFER message.
2015-07-28 16:32:38 +02:00
00e1e6bcbe
Merge pull request #572 from devsaurus/dev
...
Upgrade u8g module and add display bindings
2015-07-26 22:55:52 +08:00
f4f62fb255
fix display table construction
2015-07-21 20:37:44 +02:00
6fd106afac
added more displays:
...
sh1106_128x64_i2c
ssd1306_64x48_i2c
ssd1309_128x64_i2c
ssd1327_96x96_gr_i2c
uc1611_dogm240_i2c
uc1611_dogxl240_i2c
ld7032_60x32_hw_spi
pcd8544_84x48_hw_spi
pcf8812_96x65_hw_spi
sh1106_128x64_hw_spi
ssd1306_64x48_hw_spi
ssd1309_128x64_hw_spi
ssd1322_nhd31oled_bw_hw_spi
ssd1322_nhd31oled_gr_hw_spi
ssd1325_nhd27oled_bw_hw_spi
ssd1325_nhd27oled_gr_hw_spi
ssd1327_96x96_gr_hw_spi
ssd1351_128x128_332_hw_spi
ssd1351_128x128gh_332_hw_spi
ssd1351_128x128_hicolor_hw_spi
ssd1351_128x128gh_hicolor_hw_spi
ssd1353_160x128_332_hw_spi
ssd1353_160x128_hicolor_hw_spi
st7565_64128n_hw_spi
st7565_dogm128_hw_spi
st7565_dogm132_hw_spi
st7565_lm6059_hw_spi
st7565_lm6063_hw_spi
st7565_nhd_c12832_hw_spi
st7565_nhd_c12864_hw_spi
uc1601_c128032_hw_spi
uc1608_240x128_hw_spi
uc1608_240x64_hw_spi
uc1610_dogxl160_bw_hw_spi
uc1610_dogxl160_gr_hw_spi
uc1611_dogm240_hw_spi
uc1611_dogxl240_hw_spi
uc1701_dogs102_hw_spi
uc1701_mini12864_hw_spi
2015-07-20 23:11:13 +02:00
b837726013
simplify device/display macros
2015-07-20 22:07:59 +02:00
05e3267f24
update to u8glib 1.18.1
2015-07-19 23:22:50 +02:00
8bd3d7d2bf
introduce lua_api_name parameter when building the display table
...
keeps the API as before and gets rid of hw_spi vs sw_spi topics
2015-07-19 21:57:14 +02:00
philip
Johny Mattsson
Johny Mattsson
devsaurus
jfollas
Robert Foss
Huang Rui
Terry Ellison
Thomas Soëte
Marcel Stör
Konrad Beckmann
dnc40085
dnc40085
Johny Mattsson
Artem Pastukhov
Nick Andrew
btsimonh
Ivan Lopez
Łukasz Oleś
Vowstar
Antoine
Jens Jensen
kvakanet
Jonathan karras
chris
aeprox
Jonathan Karras
Jakub
Bernd Meyer
zeroday