Profouzors
/
boxespy
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
825 Commits 2 Branches 0 Tags 77 MiB
Commit Graph

531 Commits

Author SHA1 Message Date
Florian Festi 44bce898e0 UniversalBox: Add alternative "lid" for f and F top_edges: 
A rim leaving the box open
 2018-07-02 19:07:26 +02:00
Florian Festi 2c7f9f4dc0 UniversalBox: Add f and F as possible top_edge types 2018-07-02 19:07:26 +02:00
Florian Festi 37a798e91e Add top "lid" for F edge 2018-07-02 19:07:25 +02:00
Sebastian Reichel 8b172cbddd Add 10" rack box derived from 19" rack box 2018-06-27 21:48:35 +02:00
Sebastian Reichel d75ea78196 Add support for specifying font color/size 2018-06-27 21:48:35 +02:00
Florian Festi 6538c92910 OrganPipe: Offer multiple units for the pressure given 2018-05-18 14:12:30 +02:00
Florian Festi 924372f79d Use a minimal line width (0.05mm) even for very small burn values 
to keep the lines visible in these cases.
 2018-05-17 11:27:58 +02:00
Florian Festi 1d0aa05e9a OrganPipe: Use unicode for Py 2 compat 2018-05-12 17:14:02 +02:00
Florian Festi d9e8930e31 OrganPipe: Add encoding 2018-05-12 17:11:26 +02:00
Florian Festi 4798c24815 New generator: Organ pipe 
Still untested
 2018-05-12 17:06:10 +02:00
Florian Festi f99bf32c85 Add hinges and spacing params to CabinetHingeEdge 2018-05-08 23:55:09 +02:00
Florian Festi 2828a85725 Add flatHole() for shafts that are flattened on both sides. 2018-05-05 19:08:37 +02:00
Florian Festi 50b9bc9ffb TypeTray: Fix finger holes in bottom which had been mirrored in x direction 2018-04-25 23:36:32 +02:00
Florian Festi 616bf42239 RegularBox: Fix top edge for "angled hole" top 2018-04-25 22:02:52 +02:00
Florian Festi d3c922d289 RegularBox: Use FingerJointSettings for vertical edges, too 
Fixes #65
 2018-04-25 22:02:24 +02:00
Florian Festi 73438fb614 Fix .__getattr__ of Settings class so it can be passed to copy.copy() 2018-04-25 21:52:51 +02:00
Florian Festi 879ae1af68 DisplayShelf: Do not render front wall if set to zero 2018-04-15 19:43:31 +02:00
Florian Festi ebe02e2be5 DisplayShelf: Use better defaults 2018-04-15 19:43:31 +02:00
Florian Festi 65358c9fad Add hint to outside param to nominally inner sizes 2018-04-05 22:55:23 +02:00
Florian Festi b2c54310b6 UnevenHeightBox: Fix lid 
Looks like it is difficult to come up with a really non symmectrical test case.
Thanks to Mekol for pointing this out!

Related #60
 2018-03-17 21:04:24 +01:00
Florian Festi fa44eb27cf UneveHeigthBox: Minor tweaks 2018-03-17 17:32:21 +01:00
Florian Festi 58cb06ec94 UnevenHeightBox: Add lid 2018-03-17 17:19:47 +01:00
Florian Festi 7c716a9e5f UnevenHeightBox: Make bottom edge parametric 2018-03-15 20:46:00 +01:00
Florian Festi 786ff222c2 New generator: UnevenHeightBox 
Box with different height in each corner
 2018-03-15 19:08:47 +01:00
Florian Festi 0604744284 OttoSoles: Add dove tail joints to the connecting edges 2018-03-11 17:43:55 +01:00
Florian Festi f2106a2c8c OttoSoles: Add support for tabs 2018-03-11 09:13:40 +01:00
Florian Festi 49ce2ed412 New generator: Ottosoles 
Foam soles for the OttO Bot
 2018-03-10 19:28:30 +01:00
Florian Festi 90ba9f8ee9 LidEdge: Fix duplicated option for spring 2018-03-05 20:10:55 +01:00
Florian Festi dd7d282c65 Rack19Box: Fix width and placement of holes 2018-02-27 18:41:39 +01:00
Florian Festi 66c419ab7f New generator: Rack19Box 
Closed box with screw on top for mounting in a 19" rack.
 2018-02-27 18:04:26 +01:00
Florian Festi c3917d3292 IntegratedHingeBox: switch x and y measurements 
So the hinge is at the backside along the x axis
 2018-02-20 08:23:07 +01:00
Florian Festi 8cb9919968 FlexBox2: Rename params to reflect the actual axis of measurement 
h -> x
y -> h
x -> y
 2018-02-19 16:49:04 +01:00
Florian Festi 78d35a92e0 Fix CrossingFingerHoleEdge 
which relies on __call__() of the super class drawing a line
 2018-02-12 22:04:20 +01:00
Florian Festi 211e302b41 Fix devision by zero for zero lengths 2018-02-10 21:00:08 +01:00
Florian Festi 039fe5f2ee ElectronicsBox: Fix holes in the lid 2018-02-03 22:33:27 +01:00
Florian Festi a70222d646 New generator: RackBox 2018-02-03 22:31:53 +01:00
Florian Festi 6ef43a8f48 Add flangedWall() and use it in the ElectronicsBox 2018-02-03 21:52:12 +01:00
Florian Festi b0bef745b2 ElectronicsBox: Fix top edge and height 2018-02-02 14:06:18 +01:00
Florian Festi a53c5857c2 New generator: AngledCutJig 
For making angled cuts in a laser cutter
 2018-01-21 22:05:48 +01:00
Florian Festi 8314a413fd Fix placement of rectangularTriangles 2018-01-21 16:48:43 +01:00
Florian Festi 4e034949d3 Fix tabs for straight edges (eE) with bed bolts 
Add tabs param to bedBoltHole
 2018-01-19 23:48:27 +01:00
Stefan Grosshauser 73e1821e71 enable bedbolts for Straight 'e' and OutSet edges 'E' 
note that this mostly ignores that positioning bedbolts is done
in the BedBolt class for finger joints.
Coding style could be much improved.
 2018-01-18 15:07:33 +01:00
Stefan Grosshauser 07f88cd8e5 make __call__() abstract for BaseEdge; and inherit OutSetEdge from Edge 2018-01-18 15:07:24 +01:00
Florian Festi 62b6016448 OttoLegs: Increase number of tabs for feet and ankles 2018-01-13 21:11:33 +01:00
Florian Festi 68f1c375f7 OttoLegs: Move tabs to outer ring 2017-12-20 18:25:55 +01:00
Florian Festi 7bd2b9e452 HingeEdge: Add tabs to hinge disk 2017-12-20 18:25:55 +01:00
Florian Festi ce240105a8 Add tabs param to hole() 2017-12-20 18:25:55 +01:00
Florian Festi c02cc1e95c Add tabs to corner 2017-12-20 18:25:55 +01:00
Florian Festi d2496df3bb Boxes.moveArc() 2017-12-20 18:25:44 +01:00
Florian Festi 703d0e49db OttoBody: Add tabs to the PCB clamps 2017-12-19 20:10:08 +01:00
Florian Festi f44f87a25c Remove print for Python 2 compat 2017-12-19 19:36:37 +01:00
Florian Festi 946d040bac OttoBot: Move to Misc UI Group 
Set default leg legth to 34mm
 2017-12-18 23:49:18 +01:00
Florian Festi e26991695a Mark top side of servo mount. 
Move servo mounts up as they need to be cut separately (in 5mm)
 2017-12-17 15:30:32 +01:00
Florian Festi e5bb6a5d7a Add tabs to Boxes.edge() and most Edge classes 
and Boxes.polyline()

Add to some parts of the Otto Bot
 2017-12-15 16:45:32 +01:00
Florian Festi e0caa3aad8 OttoBody: Add fix for changed ChestHinge 2017-12-09 16:54:20 +01:00
Florian Festi f0dc89c617 Make play of ChestHinge a regular param 2017-12-09 16:54:10 +01:00
Florian Festi 9dfa95f45b Fix ChestHinge 
Add the play of the hinge to the width of the edge
Adjust IntegratedHingeBox
Fixes #45
 2017-12-07 22:29:09 +01:00
Florian Festi 319b1f869f Use unicode for Python 2 compat 2017-11-30 23:32:30 +01:00
Florian Festi d52b561a2f Use explicit encoding 2017-11-30 23:30:50 +01:00
Florian Festi 1b2f5791bd Use Boxes.description in the cli help and the web interface 2017-11-30 22:48:02 +01:00
Florian Festi 3dfd99c68a Rename method to not collide with new description property 2017-11-30 22:46:35 +01:00
Daniela Festi 72e6dd2213 Added a description to TrafficLight generator 2017-11-30 22:46:35 +01:00
Daniela Festi fa9ac678c0 Added variables for description of generators to main class 2017-11-30 22:46:35 +01:00
Florian Festi 0d9885ad4c Stachel: Fix length of pin clamp for middle layer 2017-11-23 21:04:54 +01:00
Florian Festi 2772eba87c Gears: holes for the shafts 2017-11-22 21:32:25 +01:00
Florian Festi a7f6ef1b62 Gears: Print sizes 2017-11-22 21:32:04 +01:00
Florian Festi afbb8d11fd Gear generator 2017-11-22 21:32:04 +01:00
Florian Festi eb07c927c4 Support multi line .text() 2017-11-22 21:32:04 +01:00
Florian Festi f77c19d839 Stachel: Clean up and move generator to Misc 2017-11-21 23:08:39 +01:00
Florian Festi 5a6bc71a7c Stachel: replace absolute sizes with (internal) parameters 2017-11-21 22:39:57 +01:00
Florian Festi 941676d2b7 New generator: Stachel - an end pin for bass recorders 2017-11-21 22:39:57 +01:00
Florian Festi 08d7a026b1 NemaMount: Add finger holes to copy on another part 
instead of using the base plate
 2017-11-19 19:30:06 +01:00
Florian Festi 642212d2ce New generator: NemaMount 2017-11-19 18:10:59 +01:00
Florian Festi 46c4960edc New generator: Display 2017-11-18 18:28:13 +01:00
Florian Festi 45c73e57fb New generator: EletronicsBox 
Closed box with screw on top and mounting holes
 2017-11-15 17:19:41 +01:00
Florian Festi 90078049f8 Also support d (diameter) param for Boxes.hole() 2017-11-15 17:19:41 +01:00
Florian Festi 36c0ec48fe TypeTray: Add closedtop parameter 
Add a top wall turning the type tray into a closed box with multiple
compartments
 2017-11-14 20:21:01 +01:00
Florian Festi 7793729688 New generator:LBeam 
Simple Lbeam made of two wall joint with a right angle
 2017-11-14 20:20:08 +01:00
Florian Festi 8d846df9d1 Add D holes to knobs 2017-11-07 23:39:50 +01:00
Marius Bergmann c0325b52ac template: Remove invalid parameter and whitespace 2017-11-03 22:54:06 +01:00
Florian Festi dd2cedeb57 Knobs: Improve param descriptions 2017-10-01 21:13:29 +02:00
Florian Festi 696307397d Refuse knobs with less than 2 serrations 2017-10-01 21:01:18 +02:00
Florian Festi 98e9f827ec waivyKnob: Fix number of serrations 
Used to print only have the number of serrations and didn't close
on uneven numbers
 2017-10-01 20:54:04 +02:00
Florian Festi dfcf3d65c8 New generator: ConcaveKnob in Parts 2017-10-01 20:34:19 +02:00
Florian Festi 647c5302b6 New generator: WaivyKnob 2017-10-01 20:20:36 +02:00
Florian Festi 241c65b244 .waivyKnob(): Fix start position for angles != 45 degees 2017-10-01 20:18:42 +02:00
Florian Festi 64c980817b Manully select font face 2017-09-19 22:53:27 +02:00
Florian Festi 9dbc8fd98b Modernize _template.py 2017-09-16 21:30:41 +02:00
Florian Festi f829ff2a82 PoleHook: Use screwhead param for knob 2017-09-16 21:30:41 +02:00
Florian Festi b7f877eacd Fix bedbolts 
BedBoltSettings need to become a subclass of Settings instead of a list
of values at some point.
 2017-09-13 11:39:03 +02:00
Florian Festi b623008ea3 ClosedBox: fix (commented out) BedBolt support 2017-09-13 11:39:03 +02:00
Florian Festi 23a1da105e WineRack: Remove debug code for checking number of walls needed. 2017-09-05 23:05:11 +02:00
Florian Festi 7453455512 WineRack: Make unnecessary walls optional 2017-09-05 23:00:54 +02:00
Florian Festi 0e7827f9a9 WineRack: Add front cover 2017-09-05 21:04:20 +02:00
Florian Festi fbfb851474 New generator: WineRack 
A honey comb like wine rack
 2017-09-05 21:04:20 +02:00
Florian Festi ab750077fa .partsMatrix(): Do not error out for zero or negative parts count 2017-08-28 23:10:56 +02:00
Florian Festi ddcf13bf6c svgutil: Make detection of view port a bit more robust 2017-08-20 19:56:33 +02:00
Florian Festi 592fbe95c4 OttoLegs: Change ankles. Fix servo horn with a C-ring 
Fixes issue with servo horns only being adjustable in steps of 18 degrees
This led to missaligned feet which resulted in loss of freedom of movement.
 2017-08-19 22:14:30 +02:00
Florian Festi 6fecb9aa29 OttoBody: Move main switch to outer wall 
Shorten servo holder so it no longer needs a hole for the switch
 2017-08-19 19:31:54 +02:00
Florian Festi 398851255d OttoLegs: Use servo horn for actuating the ankles 2017-08-12 00:07:34 +02:00
Florian Festi 4dd271df74 OttoLegs: Make ankle screw screwed into leg 
to give more stability to the joint
 2017-08-11 18:44:34 +02:00
Florian Festi bb76a8bd7b OttoLeg: Use partsMatrix to get multiple part 2017-08-11 17:46:50 +02:00
Florian Festi 93b94d6e70 Fix move="right" for partsMatrix 2017-08-07 17:08:16 +02:00
Florian Festi 09dd779cbd OttLegs: Make hole for servo cable over whole width of the leg 2017-08-07 17:03:57 +02:00
Florian Festi fafc1c01ef OttoLegs: break ankles into separate paths 2017-08-03 23:19:32 +02:00
Florian Festi e91f53b0fa OttoLegs: Change design of ankles 2017-08-03 23:00:20 +02:00
Florian Festi b4b6799721 OttoBody: Add hook to PCB Clip 2017-08-03 22:32:33 +02:00
Florian Festi e3035da713 OttoBody: Move hole for push button 2017-08-01 21:19:01 +02:00
Florian Festi 2e9ac29d01 OttoLegs: Make length of legs configurable 2017-08-01 21:17:35 +02:00
Florian Festi 979b6ae936 OttoBody: Add push button 2017-07-31 21:18:06 +02:00
Florian Festi a639c04de2 OttoBody: Clips for keeping the mouth shut 2017-07-31 21:08:26 +02:00
Florian Festi 31e3817f32 OttoBody: New PCB Clamps 2017-07-31 20:46:41 +02:00
Florian Festi fd23c74e07 Otto Body: parts for mounting the PCB 2017-07-30 21:23:00 +02:00
Florian Festi e26d17c840 AngledBox: Don't overwrite h param 
Using h as temporary variable was overwriting the variable containing the
height of the box.

Fixes #41
 2017-07-28 23:33:36 +02:00
Florian Festi 83a72552e2 Ottobot: Make hole for USB plug a bit smaller again 2017-07-25 22:43:11 +02:00
Florian Festi c823cb78d6 OttoBot: Add Hole for on/off switch 2017-07-25 21:57:58 +02:00
Florian Festi 3876ea5ddd Ottobot: Increase hole for USB plug 2017-07-23 21:29:14 +02:00
Florian Festi 074646fdec _template.py tweaks 2017-05-20 20:41:51 +02:00
Florian Festi 82463317bb Edges generator for printing the registerd Edge types 
Not really a generator...
 2017-05-20 20:41:51 +02:00
Florian Festi abb7706b6d Python2 compat for Inkscape 2017-05-14 21:47:49 +02:00
Florian Festi 770b3dc02f Add .dHole() 2017-05-05 16:52:42 +02:00
Florian Festi d7aadc9b72 Add callback param to gears.gearCarrier() 2017-05-04 21:41:18 +02:00
Florian Festi 07ede0a5c5 Add support for "only" in the move param of .partsMatrix() 2017-05-04 21:41:18 +02:00
Florian Festi 9bf9922d28 Stroke in move after part is completed 2017-05-04 21:41:18 +02:00
Florian Festi 3822cc4882 Add TX holes 2017-05-04 21:41:18 +02:00
Florian Festi ae619aabea Flexbox4: Fix length of lid 
to overlap the side wall
 2017-04-11 21:09:41 +02:00
Florian Festi 7bbf82c958 UBox: Fix size of lid 2017-04-11 20:55:21 +02:00
Florian Festi b63dcfeee6 Make Traylayout work without main function 2017-04-05 04:33:42 +02:00
Florian Festi 5b9c8e4d71 Remove main function from generators 
Generators are no longer executable on their own. Use scripts/boxes
instead.
 2017-04-05 04:33:42 +02:00
Florian Festi bffd732c3f scripts/boxes: Use generator classes instead of main functions 
Make Boxes.parseArgs more robust
--list generators by UI group.
Pass arguments explicitly instead of fiddling with sys.argv
 2017-04-05 04:33:28 +02:00
Florian Festi f9c0cb8cab Support putting class and instances into UI Groups 2017-04-02 02:31:37 +02:00
Florian Festi 8e65298c6b Planetary2: Print gearing ratio and change default for sun gear 2017-04-01 23:54:44 +02:00
Florian Festi 12f2cbc1e2 Planetary2: Add allignment pins to sun gear 2017-04-01 21:18:48 +02:00
Florian Festi 273190932f Planetary2: Order part the way they need to go together 2017-04-01 21:06:57 +02:00
Florian Festi 4c17d6a4a1 Planetary2: Put planet gears in the order they need to go together 2017-04-01 20:59:19 +02:00
Florian Festi 7f1e54be15 Planetary2: Add pin holes for ring gear and add second ring 2017-03-30 20:59:13 +02:00
Florian Festi 8487d5c379 Planetary2: New generator for a ~100 reduction to belt pulley 2017-03-29 07:44:48 +02:00
Florian Festi 93480e082d gears: Add teeth_only param to allow using gears as lines and not only as parts 2017-03-29 07:42:57 +02:00
Florian Festi 427a6fc54b Change default of mount_hole to 0 2017-03-29 07:42:15 +02:00
Florian Festi bad114400f Use better default for height of pulley (using the new keyword style) 2017-03-29 07:41:05 +02:00
Florian Festi ff6da9eb80 Fix pulley size calculation for r_axle being None 2017-03-29 07:40:17 +02:00
Florian Festi c7490155f7 Add nema_mount default parameter 
Make nema_sizes available outside of NEMA() function.
This whole stuff should probably move into it's own file/class at some point
 2017-03-29 07:38:10 +02:00
Florian Festi 53cbed768b Allow using keyword args for buildArgParser for setting the defaults 2017-03-29 07:36:50 +02:00
Florian Festi c2fa8c85cf Pulley: Add insideout param 
This allows using timing belts as strainwaves in harmonic drives.
 2017-03-22 22:03:09 +01:00
Florian Festi c2ab70eefe Add Boxes.circle() primitive 2017-03-22 22:03:09 +01:00
Florian Festi 71bd013f3f RegularBox: Better description 2017-03-13 11:41:12 +01:00
Florian Festi cd0d49bf6f OttoLegs: Use two different hole sizes for the ankle 
to allow screwing it into one side while moving freely on the other
 2017-03-12 14:47:21 +01:00
Florian Festi cd3fee5e76 OttoLegs: More tweaks 
Lengthen front by 1mm to close gap to servo
Lower ankle hole at leg by 0.5mm
Shorten internal wall holding the servo at top
 2017-03-11 20:14:29 +01:00
Florian Festi 672295310b OttoBody: Body for Otto LC 2017-03-11 18:22:41 +01:00
Florian Festi c6c2e203f2 OttoLegs: Make ankle bolt diameter configurable 2017-03-11 18:22:41 +01:00