Profouzors
/
boxespy
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
825 Commits 2 Branches 0 Tags 77 MiB
Commit Graph

531 Commits

Author SHA1 Message Date
Florian Festi 17e4eb8563 PaintStorage: Fix heights 2018-11-15 22:10:19 +01:00
Florian Festi ed6855d79c RoundedPlate: Call first callback only once 
Remove left over call to .cc()
 2018-11-09 21:01:00 +01:00
Florian Festi d85fa4e849 LaserClamp: Improve design 
Extend bottom bracket and add hook
Use only one bottom bracket
Add finger ring to allow easier placement
Improve top hook
 2018-11-05 22:08:23 +01:00
Florian Festi 0f999a89ad New generator: AllEdges showing all the standard edge types 2018-11-05 21:38:49 +01:00
Florian Festi b7bd6306d1 Fix division by zero in FlexEdge 2018-11-05 21:38:49 +01:00
Florian Festi fe89528e05 PaintStorage: Add support for hexagonal hole patterns 2018-10-29 18:16:16 +01:00
Florian Festi 36077e6cb0 PaintStorage: Optimize part placement 2018-10-29 15:44:18 +01:00
jens persson c28541a977 Add a generator for paintstand 
A simple stackable paintstand, very much inspired by:
https://www.youtube.com/watch?v=6HJarJg1npk
 2018-10-29 15:11:35 +01:00
jens persson e95f36a18a Parameterize Silverwarebox 
Make the messurements selectable
 2018-10-28 13:19:37 +01:00
Florian Festi 80288079af New generator: TwoPiece 
Based on a generator with the same name by bobm123<bobm123@gmail.com>
 2018-10-25 22:35:20 +02:00
Florian Festi 5b93c1228d CardBox: Add num param for the number of decks 2018-10-25 17:36:46 +02:00
Alexander Bulimov 5a13fbea8b Add DisplayCase generator 2018-10-24 21:28:54 +02:00
Florian Festi 2060293cf3 New generator: RoyalGame of Ur 2018-10-24 21:23:57 +02:00
Florian Festi 397cc81690 FlexBox3: Use .move() 
Use .edgeCorner() instead of own implementation
 2018-10-19 22:12:13 +02:00
Florian Festi f7c2d91e42 FlexBox2: Make latchsize configurable 2018-10-19 21:46:30 +02:00
Florian Festi 417a053ad3 FlexBox2: Use .move() 2018-10-19 21:45:26 +02:00
Florian Festi 4d76457d3a FlexBox: Make latchsize configurable 2018-10-19 21:35:11 +02:00
Florian Festi 791ef0fdca FlexBox: Use .move() 2018-10-19 21:33:52 +02:00
Florian Festi a9009732ac FlexBox4: Make latchsize configurable 2018-10-19 19:20:23 +02:00
Florian Festi 4ba18d87b7 FlexBox4: Modernize a bit and use .move() 2018-10-19 19:15:55 +02:00
Florian Festi a4b5af98e2 Add new "mirror" key word to the where parameter of Boxes.move() 2018-10-19 19:05:07 +02:00
Florian Festi c45b5cd30b Add debug rectangle for move commands 2018-10-19 18:58:29 +02:00
Florian Festi 1cf671ddd2 FlexBox4: Calculate length of flex after adjusting the radius 2018-10-19 10:02:16 +02:00
jens persson 716fd389e3 Add a box for storage of playingcards 
The box have place for two stacks of cards with a divider between.
It have a slide in lid.
 2018-10-09 16:55:34 +02:00
Florian Festi 14c6338713 New generator: LaserClamp 2018-10-06 22:55:46 +02:00
Florian Festi 60cb0eed87 CabinetHinge: Add style param with new value outside 2018-10-04 22:18:07 +02:00
Florian Festi b07983582e HingeBox: Add support for split lids 2018-09-30 15:31:16 +02:00
Florian Festi db16b16533 .rectangularWall(): Fix placement for hex holes enabled by holesMargin param 2018-09-13 09:23:56 +02:00
Florian Festi 9ad64a1764 Boxes.buildArgParser: Update doc string 2018-09-10 10:00:02 +02:00
Florian Festi 259834a983 ArgparseEdgeType: Add doc string 2018-09-10 10:00:02 +02:00
Florian Festi 84df48ba1d Add units (mm) to the tabs param description 2018-09-10 10:00:02 +02:00
Rotzbua 84ce484f93 [doc] add hint to disable reference 2018-09-08 15:33:09 +02:00
Florian Festi b8ff1b8cf6 TrayLayout: Make parsing a bit more robust 
Ignore white space at the end of lines with horizontal walls
 2018-08-27 16:55:00 +02:00
Florian Festi b4a95aca15 TrayLayout: Fix burn correction for bottom plate 
All edges were missing the burn correction outset (aka kerf).
 2018-08-27 15:13:31 +02:00
Florian Festi fc127237fd Fix placement of fingerHoles in CrossingFingerHoleEdge 
which were too low by one burn
 2018-08-27 15:12:17 +02:00
Florian Festi 0e8a718a1b Fix placement of debugging rectangel for FingerHoles 
Not the outer border of the lines are exactly at the border of the matching
part
 2018-08-27 15:10:50 +02:00
Florian Festi 3767598d5d Fix placement of rectangularHole() which was off by one burn 2018-08-27 15:09:17 +02:00
Florian Festi ec77d6aa22 Doc strings for Parts methods 2018-08-23 23:28:24 +02:00
Florian Festi 897fc23029 Doc string for Boxes.flex2D() 2018-08-23 23:28:24 +02:00
Florian Festi 6c43f4a382 Doc string for Boxes.TX() 2018-08-23 23:28:20 +02:00
Florian Festi a99094b8d7 Doc string for Boxes.partsMatrix() 2018-08-23 23:27:35 +02:00
Florian Festi d360703cba TypeTray: Make bottom_edge parametric 
This does not affect the inside walls
 2018-08-16 20:49:12 +02:00
Florian Festi 46175dde11 Fix url params for checkboxes when re-opening an input form 
Thanks to Rotzbua for pointing the issue out!
 2018-08-16 08:54:52 +02:00
Florian Festi 8563818925 Hook: Boxify and parametrize generator 2018-08-14 14:01:59 +02:00
Marius Bergmann 2831b41d21 Add wall hook generator 2018-08-14 11:55:31 +02:00
Florian Festi f83ca31a0a RoundedBox: Add wallpieces param 2018-08-06 19:46:48 +02:00
Florian Festi af7f29c51f Add (wall)pieces param to roundedPlate() and surroundingWall() 2018-08-06 19:46:23 +02:00
Florian Festi 7c8ae621f7 CloseBox: Put bed blots at the right places 
Keep them still disabled, though.
 2018-07-25 16:34:58 +02:00
Florian Festi 05c41be4d1 Remove or comment debugging outputs 2018-07-24 20:36:13 +02:00
Florian Festi cd0fcdcb96 Set a char for CrossingFingerHoleEdge tp avoid collision with the "e" edge. 2018-07-02 19:13:52 +02:00
Florian Festi 44bce898e0 UniversalBox: Add alternative "lid" for f and F top_edges: 
A rim leaving the box open
 2018-07-02 19:07:26 +02:00
Florian Festi 2c7f9f4dc0 UniversalBox: Add f and F as possible top_edge types 2018-07-02 19:07:26 +02:00
Florian Festi 37a798e91e Add top "lid" for F edge 2018-07-02 19:07:25 +02:00
Sebastian Reichel 8b172cbddd Add 10" rack box derived from 19" rack box 2018-06-27 21:48:35 +02:00
Sebastian Reichel d75ea78196 Add support for specifying font color/size 2018-06-27 21:48:35 +02:00
Florian Festi 6538c92910 OrganPipe: Offer multiple units for the pressure given 2018-05-18 14:12:30 +02:00
Florian Festi 924372f79d Use a minimal line width (0.05mm) even for very small burn values 
to keep the lines visible in these cases.
 2018-05-17 11:27:58 +02:00
Florian Festi 1d0aa05e9a OrganPipe: Use unicode for Py 2 compat 2018-05-12 17:14:02 +02:00
Florian Festi d9e8930e31 OrganPipe: Add encoding 2018-05-12 17:11:26 +02:00
Florian Festi 4798c24815 New generator: Organ pipe 
Still untested
 2018-05-12 17:06:10 +02:00
Florian Festi f99bf32c85 Add hinges and spacing params to CabinetHingeEdge 2018-05-08 23:55:09 +02:00
Florian Festi 2828a85725 Add flatHole() for shafts that are flattened on both sides. 2018-05-05 19:08:37 +02:00
Florian Festi 50b9bc9ffb TypeTray: Fix finger holes in bottom which had been mirrored in x direction 2018-04-25 23:36:32 +02:00
Florian Festi 616bf42239 RegularBox: Fix top edge for "angled hole" top 2018-04-25 22:02:52 +02:00
Florian Festi d3c922d289 RegularBox: Use FingerJointSettings for vertical edges, too 
Fixes #65
 2018-04-25 22:02:24 +02:00
Florian Festi 73438fb614 Fix .__getattr__ of Settings class so it can be passed to copy.copy() 2018-04-25 21:52:51 +02:00
Florian Festi 879ae1af68 DisplayShelf: Do not render front wall if set to zero 2018-04-15 19:43:31 +02:00
Florian Festi ebe02e2be5 DisplayShelf: Use better defaults 2018-04-15 19:43:31 +02:00
Florian Festi 65358c9fad Add hint to outside param to nominally inner sizes 2018-04-05 22:55:23 +02:00
Florian Festi b2c54310b6 UnevenHeightBox: Fix lid 
Looks like it is difficult to come up with a really non symmectrical test case.
Thanks to Mekol for pointing this out!

Related #60
 2018-03-17 21:04:24 +01:00
Florian Festi fa44eb27cf UneveHeigthBox: Minor tweaks 2018-03-17 17:32:21 +01:00
Florian Festi 58cb06ec94 UnevenHeightBox: Add lid 2018-03-17 17:19:47 +01:00
Florian Festi 7c716a9e5f UnevenHeightBox: Make bottom edge parametric 2018-03-15 20:46:00 +01:00
Florian Festi 786ff222c2 New generator: UnevenHeightBox 
Box with different height in each corner
 2018-03-15 19:08:47 +01:00
Florian Festi 0604744284 OttoSoles: Add dove tail joints to the connecting edges 2018-03-11 17:43:55 +01:00
Florian Festi f2106a2c8c OttoSoles: Add support for tabs 2018-03-11 09:13:40 +01:00
Florian Festi 49ce2ed412 New generator: Ottosoles 
Foam soles for the OttO Bot
 2018-03-10 19:28:30 +01:00
Florian Festi 90ba9f8ee9 LidEdge: Fix duplicated option for spring 2018-03-05 20:10:55 +01:00
Florian Festi dd7d282c65 Rack19Box: Fix width and placement of holes 2018-02-27 18:41:39 +01:00
Florian Festi 66c419ab7f New generator: Rack19Box 
Closed box with screw on top for mounting in a 19" rack.
 2018-02-27 18:04:26 +01:00
Florian Festi c3917d3292 IntegratedHingeBox: switch x and y measurements 
So the hinge is at the backside along the x axis
 2018-02-20 08:23:07 +01:00
Florian Festi 8cb9919968 FlexBox2: Rename params to reflect the actual axis of measurement 
h -> x
y -> h
x -> y
 2018-02-19 16:49:04 +01:00
Florian Festi 78d35a92e0 Fix CrossingFingerHoleEdge 
which relies on __call__() of the super class drawing a line
 2018-02-12 22:04:20 +01:00
Florian Festi 211e302b41 Fix devision by zero for zero lengths 2018-02-10 21:00:08 +01:00
Florian Festi 039fe5f2ee ElectronicsBox: Fix holes in the lid 2018-02-03 22:33:27 +01:00
Florian Festi a70222d646 New generator: RackBox 2018-02-03 22:31:53 +01:00
Florian Festi 6ef43a8f48 Add flangedWall() and use it in the ElectronicsBox 2018-02-03 21:52:12 +01:00
Florian Festi b0bef745b2 ElectronicsBox: Fix top edge and height 2018-02-02 14:06:18 +01:00
Florian Festi a53c5857c2 New generator: AngledCutJig 
For making angled cuts in a laser cutter
 2018-01-21 22:05:48 +01:00
Florian Festi 8314a413fd Fix placement of rectangularTriangles 2018-01-21 16:48:43 +01:00
Florian Festi 4e034949d3 Fix tabs for straight edges (eE) with bed bolts 
Add tabs param to bedBoltHole
 2018-01-19 23:48:27 +01:00
Stefan Grosshauser 73e1821e71 enable bedbolts for Straight 'e' and OutSet edges 'E' 
note that this mostly ignores that positioning bedbolts is done
in the BedBolt class for finger joints.
Coding style could be much improved.
 2018-01-18 15:07:33 +01:00
Stefan Grosshauser 07f88cd8e5 make __call__() abstract for BaseEdge; and inherit OutSetEdge from Edge 2018-01-18 15:07:24 +01:00
Florian Festi 62b6016448 OttoLegs: Increase number of tabs for feet and ankles 2018-01-13 21:11:33 +01:00
Florian Festi 68f1c375f7 OttoLegs: Move tabs to outer ring 2017-12-20 18:25:55 +01:00
Florian Festi 7bd2b9e452 HingeEdge: Add tabs to hinge disk 2017-12-20 18:25:55 +01:00
Florian Festi ce240105a8 Add tabs param to hole() 2017-12-20 18:25:55 +01:00
Florian Festi c02cc1e95c Add tabs to corner 2017-12-20 18:25:55 +01:00
Florian Festi d2496df3bb Boxes.moveArc() 2017-12-20 18:25:44 +01:00
Florian Festi 703d0e49db OttoBody: Add tabs to the PCB clamps 2017-12-19 20:10:08 +01:00