fcb14a33b3
Merge pull request #987 from DiUS/enduser_enhanced
...
Enhancements to enduser_setup module
2016-02-02 00:39:47 +11:00
86839d6e71
Fixes and enchancements for enduser_setup module.
...
Fixes:
* Removed spurious \0 bytes being sent to the client in many cases.
* Properly terminated 404 header.
* Now including Content-length: header for index.html (including built-in).
Clients otherwise had to wait for their own timeout before considering
the page load complete, which resulting in an unpleasant sluggish
experience.
* Switched form submission to GET, as iOS sometimes does not include the
body in the same packet as the POST header, which led to the module
not finding the form values.
* Added redirect after form submission to avoid blank-page-in-browser.
* Moved common "enduser_setup" prefix to a lua_pushfstring() to reduce
string literal overhead.
* Replaced cached lua_State* with calls to lua_getstate(), as in other
modules.
* Fixed broken appending of MAC to the SSID.
* Fixed up macro definitions to not break `if` clauses unintentionally.
Enhancements:
* Support for scanning for available WiFi networks, and picking from the list.
* Support for retrieving the current WiFi station status.
* Added "manual" mode, where the module does not (re)configure the AP setup,
nor shut down automatically. Default is still automatic, as before.
* Updated docs for new `enduser_setup.manual()` function.
2016-02-01 14:42:24 +11:00
76b28c1f74
Simple mdns implementation using the Espressif code
2016-01-29 21:37:19 -05:00
8db93bcabf
make delay optional
2016-01-29 18:52:38 +01:00
3a597f1698
implement architecture dependent delay functions for esp8266 port
2016-01-29 18:52:38 +01:00
1c32d20502
improve error checking in mqtt module
...
connect(), close(), subscribe(), publish()
2016-01-28 21:36:38 +01:00
edbcbe1b0f
Fixed issue where default ESP_xxxxxx SSID was appearing for enduser_setup
2016-01-27 10:24:10 -05:00
6ef7ece046
Cleaned up APA102 module registration.
2016-01-26 17:14:19 -05:00
0f3c0ffbb0
Added support for the APA102 LED.
2016-01-25 20:54:27 -05:00
cd06905b58
include user_interface.h to avoid implicit decls
2016-01-24 00:22:11 +01:00
85bd7bbeda
Merge pull request #951 from Alkorin/ws2812-uart
...
Rewrite ws2812 serialization code to use UART1 instead of bit-banging.
2016-01-23 10:42:56 +00:00
0cd287e67b
Added -Wimplicit to modules build.
...
Plus associated fixes.
2016-01-22 10:55:57 +11:00
182d45f928
Enable -std=gnu11 for modules dir.
...
Plus boat-load of fixes to actually make that build.
2016-01-20 19:40:47 +11:00
5b381d2f1e
Added AES support to crypto module.
...
Merely a wrapper around the (undocumented) internal SDK AES functions.
2016-01-19 15:19:11 +11:00
47b44229bf
ws2812 data buffer
...
To create a size led long buffer:
buffer = ws2812.newBuffer(size);
To fill the buffer:
buffer:fill(g, r, b)
To get a particular led color:
g, r, b = buffer:get(index)
To set a particular led color:
buffer:set(index, g, r, b);
To send the buffer:
buffer:write(pin);
2016-01-18 17:21:08 +01:00
51bb8a50ba
Rewrite code to use UART1 instead of bit-banging.
...
It allows keeping interrupts enabled but force to use GPIO2.
2016-01-18 17:16:18 +01:00
82b19c4c37
Merge branch 'newdocs' into dev
2016-01-17 14:23:13 +01:00
7e8c54890f
Merge pull request #878 from dnc40085/dev_wifi_sta_Xethostname
...
Add functions: wifi.sta.sethostname and wifi.sta.gethostname
2016-01-15 08:56:37 +00:00
52e121f469
Merge pull request #887 from vowstar/dev-all-in-one
...
Add HTTP client module and documents.
2016-01-15 17:44:41 +11:00
30f8f62420
Optimized node.bootreason() for size.
...
Reduces the size from 179 to 102 bytes.
2016-01-15 11:42:20 +11:00
d426976e60
BMP085: bmp085.init() should return 0
2016-01-14 22:23:03 +01:00
dc5cc6d9f4
Add the exccause parameter into the bootreason block
2016-01-14 08:16:26 -05:00
9772e7cdec
Merge pull request #888 from dnc40085/patch-1
...
Fix problem in wifi.sta.getap where invidual result is lost.
2016-01-14 16:49:20 +11:00
bf74b617d0
SPI: Implemented CPOL=1
...
Reference: http://bbs.espressif.com/viewtopic.php?f=49&t=1570
2016-01-13 22:39:15 -05:00
57917601b7
Expose extended reset info via node.bootreason().
2016-01-12 17:29:46 +11:00
3fb0de859f
Range check the tmr interval value.
...
Plain SDK 1.5.0 bugs out for values >6871948 or so - this commit does
not do anything to mitigate that.
2016-01-10 18:10:03 +11:00
c2f2bbd92a
Fix problem in wifi.sta.getap where invidual result is lost.
2016-01-03 20:02:50 -08:00
fcbf58cf0d
Rewrote wifi_sta_gethostname in wifi module.
2016-01-02 19:43:40 -08:00
b2190e4d7b
Added functions: wifi.sta.sethostname and wifi.sta.gethostname and
...
option to set hostname in user.config.h
2016-01-02 18:34:40 -08:00
cb0a982dc3
Minor change to node module
...
node.dsleep was using sint32 to hold sleep time when it should be using
uint32
2016-01-02 03:10:27 -08:00
2f655deeca
Merge pull request #885 from jmattsson/sdk150bin
...
Upgrade to SDK 1.5.0 + Espressif's Open LWIP 1.5.0.
2016-01-01 22:30:22 +00:00
88bae3ed22
Remove all version data and combine 33 commits to 1.
...
Add http module and documention, including fix httpclient bug.
2015-12-29 19:25:37 +08:00
20629386ca
fix parameter access for ucg.getStrWidth()
2015-12-28 15:22:09 +01:00
a6c0873a28
Upgrade to SDK 1.5.0 + Espressif's Open LWIP 1.5.0.
...
Removed earlier TCP port randomisation fix - the new SDK has its own fix
even though Espressif told me they wouldn't fix it. Yay?
2015-12-23 11:17:05 +11:00
6cbe716db0
uart: fix parity and stopbit generation
2015-12-21 17:51:43 +01:00
672c396c69
Fixed compilation error when the enduser_setup module is disabled yet requires ENDUSER_SETUP_AP_SSID to be defined.
2015-12-20 22:50:36 -05:00
1462d00e9f
Merge pull request #842 from jmattsson/module-ltr-cleanup
...
Cleanup: LTR module registration
2015-12-19 23:22:18 +00:00
5e9bf95ccc
cpol=high is not implemented due to insufficient hw docs
2015-12-16 22:23:04 +01:00
4e8ef87d03
Reworked module registration, removed modules.h
...
Module creation & registration now made a lot simpler. In essence,
each module file is now self-contained and only needs a
NODEMCU_MODULE(MYNAME, "myname", myname_map, luaopen_myname);
line to both be automatically recognised by the Lua initialization
as well as honor the LUA_USE_MODULES_MYNAME #define.
2015-12-16 16:09:16 +11:00
b773290b8c
Major cleanup of module registration pass 2.
...
carrying on Johny's edits as per my comments on #810
2015-12-16 11:21:40 +11:00
6b6456be47
Major cleanup of module registration.
...
As per #810 & #796 , only LUA_OPTIMIZE_MEMORY=2 & MIN_OPT_LEVEL=2 are
supported when building. This commit effects that limitation.
With this change modules/auxmods.h no longer needs to be updated for
every new module, nor do module writers need to cater for a hypothetical
LUA_OPTIMIZE_MEMORY < 2 scenario.
2015-12-12 15:03:40 +11:00
32b2911263
Merge pull request #746 from DiUS/vdd33
...
Remove adc.readvdd33() limitation.
2015-12-01 23:37:53 +00:00
e9e2efc443
Merge pull request #794 from btsimonh/btsimonhdev
...
Added uart.alt(n) to swap to use alternate rx/tx lines.
2015-12-01 21:35:09 +11:00
6acd91810f
Merge pull request #776 from askainet/net_dns
...
Make net.dns.resolve and net.dns work with an IP address as the hostname
2015-12-01 21:24:05 +11:00
b2345857e9
Added uart.alt(n) to swap to use alternate rx/tx lines.
...
if n = 0 -> std pinout.
if n != 0 -> alternate pinout (gpio13 and gpio15)
2015-11-28 22:51:01 +00:00
455f0f2166
Merge pull request #779 from askainet/sntp_dns
...
Make sntp.sync work with DNS hostnames
2015-11-24 11:03:37 +11:00
6674a7d7f9
Add reference to HX711 documentation to source
2015-11-19 22:54:06 +01:00
d96383691f
Make sntp.sync work with DNS hostnames
2015-11-19 21:51:33 +01:00
4ff9e6cc01
Make net.dns.resolve and net.dns work with an IP address host to resolve
2015-11-18 21:22:58 +01:00
a272491502
Make net.dns.resolve and net.dns work with an IP address host to resolve
2015-11-18 20:58:33 +01:00
98d0157283
Merge pull request #755 from robertfoss/dev
...
Added fix from #750 , to access the IP of a sender of a UDP packet, to fix SDK 1.4.0 compability.
2015-11-17 17:51:03 +11:00
5a199e6e63
Merge pull request #751 from lukaszo/ct
...
Allow to set content type in COAP (fix #658 )
2015-11-17 12:17:11 +11:00
d19c350ead
Added fix from #750 , to access the IP of a sender of a UDP packet, to fix SDK 1.4.0 compability.
2015-11-11 23:46:26 -05:00
340edbbe2f
Merge pull request #750 from lukaszo/coap-deb
...
Fix sending CoAP UDP response using new SDK 1.4.0
2015-11-12 10:41:37 +11:00
3a5e845b29
Allow to set content type in COAP ( fix #658 )
2015-11-11 12:52:13 +01:00
7ef1711e9a
Merge pull request #740 from Alkorin/ws2812
...
Better timings for WS2812 (measured 345ns/695ns, instead of 340ns/600ns)
2015-11-11 21:09:31 +11:00
63fad194e2
Merge pull request #731 from dnc40085/dev_wifi_sleep_update
...
Update function wifi.sleep
2015-11-11 17:10:10 +08:00
982be36aab
Fix sending UDP response using new SDK 1.4.0
2015-11-11 00:53:02 +01:00
4fd552fcaf
Better timings for 160MHz too.
...
Values measured:
@80MHz:
T0H: 337ns, Period: 1.274us
T1H: 687ns, Period: 1.25us
@160MHz:
T0H: 349ns, Period: 1.262us
T1H: 700ns, Period: 1.276us
2015-11-10 22:34:44 +01:00
dabfe83a7d
Unbreak build from #735 merge.
...
Now with more #ifdef.
2015-11-10 18:48:39 +11:00
27eed629e7
Remove adc.readvdd33() limitation.
2015-11-10 15:30:59 +11:00
7512e628b6
Merge pull request #742 from TerryE/dev-stripdebug
...
Port of strip debug patch to the SDK 1.4-baseline dev
2015-11-10 12:20:36 +11:00
cfae4cdc4e
Merge pull request #735 from karrots/mqtt_close_disconnect
...
mqtt:close() send the DISCONNECT message (fix #673 )
2015-11-10 12:08:16 +11:00
382eea5079
Fix building with DEVKIT_0_9 defined.
...
This got broken in the 1.4.0 overhaul, mea culpa.
2015-11-09 12:15:40 +11:00
83d06b667d
Port of strip debug patch to the SDK 1.4-baseline dev
2015-11-08 23:46:08 +00:00
c2f12a3b05
Better timings for WS2812 (measured 345ns/695ns, instead of 340ns/600ns)
2015-11-08 22:45:12 +01:00
b2167bdf3a
mqtt:close() send the DISCONNECT message ( fix #673 )
2015-11-06 07:32:04 -07:00
51046fd78b
Minor change to wifi.sleep
...
Remove unnecessary code
2015-11-06 05:10:24 -08:00
c39d317b2b
Fix mqtt connection closing when not publishing ( fixes #359 )
...
should not reset keep_alive_tick when receiving as this can prevent
sending keepalive (PINGREQ), which can result in server disconnect.
2015-11-05 20:21:53 -07:00
5d28de8595
Merge pull request #722 from TerryE/luac-cross.2
...
Moving luac cross from master to dev
2015-11-06 09:49:38 +11:00
5e95f48a55
Update function wifi.sleep to return any error codes to user
2015-11-05 13:51:42 -08:00
3da57dc85c
Merge pull request #725 from dnc40085/dev_wifi_toggle
...
Add function wifi.sleep
2015-11-05 10:07:32 +08:00
75849f79ab
Fix compiler warning in tmr.c
...
Fix compiler warning: implicit declaration of function 'system_soft_wdt_feed'
2015-11-04 17:55:09 -08:00
91ba22a49d
Minor change
...
Added static keyword to a variable
2015-11-04 06:37:57 -08:00
d6cc6d3e68
added wifi table entry for NULLMODE
2015-11-03 18:06:41 -08:00
5c1c51642e
Fix newly introduced incorrect WDT feeding.
2015-11-04 12:46:37 +11:00
4387f90339
Added function wifi.sleep
2015-11-03 17:23:43 -08:00
307323d1ff
Add luac.cross capability to nodeMCU
2015-11-03 21:37:14 +00:00
a08626d84f
Add minimum debug library providing traceback() and getregistry() functions
2015-11-03 21:34:42 +00:00
e2dd98ba10
Update mqtt.c fix for #679
...
Patch for "mqtt LWT qos and retain parameters are parsed incorrectly #679"
2015-11-02 20:14:43 -07:00
95e2bbb0f0
Merge pull request #688 from karrots/mqtt-puback-fix
...
Fix for MQTT PUBACK loop
2015-11-01 14:34:12 +08:00
a38fbdbf51
Merge pull request #713 from christakahashi/hx711-support
...
Added support for the hx711 load cell ADC.
2015-11-01 14:31:12 +08:00
57c2e6eacd
Fix for MQTT PUBACK loop
...
Conflicts:
app/modules/mqtt.c
2015-10-29 20:02:08 -06:00
52d6be5299
Merge pull request #705 from devsaurus/dev-fdplx
...
Update full-duplex for SPI module
2015-10-28 23:36:39 +01:00
9444ae28df
simplify spi api
...
duplex_mode configuration enables/disables receiving with spi.send()
spi.send_recv removed
2015-10-27 23:30:33 +01:00
38b494c07e
Merge pull request #702 from devsaurus/dev-fdplx
...
Add full-duplex support to SPI module
2015-10-27 14:34:13 +08:00
b535be7ab8
Fix WDT resets during file.format().
...
With the new SDK soft-wdt it is no longer sufficient to tickle the hardware
watchdog, so all (found) instances have been changed to system_soft_wdt_feed().
2015-10-27 14:33:22 +11:00
0ba0370b87
fix construction of table
2015-10-26 22:40:11 +01:00
d46bc5cc1f
align spi_recv to platform_spi_send_recv
2015-10-26 22:39:33 +01:00
7d77398921
introduce full/half duplex transactions and add spi.send_recv()
2015-10-25 22:58:06 +01:00
c223ecfe5f
Merge pull request #693 from devsaurus/dev-hspi_apiext
...
Extend SPI module API with improved transaction handling
2015-10-21 22:33:08 +02:00
75488639eb
make spi.send() transparent for 32 bit data
...
accept negative values as u32
2015-10-19 23:01:59 +02:00
7ac9a46c40
support secure connection based on CLIENT_SSL_ENABLE
2015-10-18 23:04:40 +02:00
a6eb5ccb80
improved default handling of clock_div and databit length
2015-10-18 11:37:17 +02:00
26f4bc7957
ensure backwards compatibility of exising api functions
2015-10-18 11:13:57 +02:00
19092712e5
remove obsolete spi_mast_send and rename platform_spi_send
2015-10-18 11:13:56 +02:00
28a04cc9c1
remove obsoleted constants for databit length
2015-10-18 11:13:56 +02:00
f238673772
rework of (H)SPI API
2015-10-18 11:13:55 +02:00
9cde0bbb83
add SPI transaction support
2015-10-18 11:13:55 +02:00
5ab8de34e7
Fix adc.readvdd33
...
Replace undocumented readvdd33 function with SDK function system_get_vdd33
2015-10-17 15:47:17 +02:00
340ef8fc0a
Merge pull request #636 from karrots/mqtt-clean-session
...
Added mqtt clean session support.
2015-10-17 20:58:06 +08:00
8fba0f47de
Make UDP server work again after 1.4.0 API changes.
2015-10-15 12:14:27 +11:00
bf8ed500bf
Moved node.key() & node.led() support into node module.
...
It was piggybacking on the Lua readline timer which no longer exists.
Also cleaned up injection of Lua commands via CoAP & node.input().
2015-10-12 13:26:05 +11:00
91ee5c088c
Wifi module update to new smartconfig API.
...
Needs testing.
2015-10-12 13:26:04 +11:00
f1552605d9
Change os_update_cpu_freq... to ets_update_cpu_freq...
...
Again, the os_xxx version has been removed from the SDK.
2015-10-12 13:26:04 +11:00
d2ac5f1712
Changed os_intr_xxx to ets_intr_xxx.
...
The os_intr_xxx macros no longer exist in the SDK.
2015-10-12 13:26:04 +11:00
3b9a42e254
Updated #includes to work on new SDK.
...
Both "c_types.h" and "lwip/ip_addr.h" don't get included indirectly anymore.
2015-10-12 13:26:04 +11:00
140bcee2e0
comment cleanup
2015-10-08 20:44:19 -07:00
cf079fa333
Basic hx711 functionality
2015-10-08 20:34:24 -07:00
093a895980
Merge pull request #678 from devsaurus/dev-hspi_clockdiv
...
Add divider for arbitrary HSPI clock frequencies, resolves #674
2015-10-06 21:05:17 +02:00
5e19b8488f
Merge pull request #644 from robertfoss/enduser_setup
...
Added ENDUSER_SETUP module.
2015-10-05 19:18:18 +11:00
ac50f9c6a5
add divider for arbitrary HSPI clock frequencies
2015-10-04 00:40:21 +02:00
8683ea4f1b
Fixed previous POST patch. Also cleaned up HTTP request handling.
2015-10-01 14:22:45 -04:00
90f770412d
Switched from HTTP GET to HTTP POST.
2015-09-30 14:11:43 -04:00
ee82b2ad12
Moved SSID define to user_config.h
2015-09-30 13:24:18 -04:00
721fadfd14
Changed SSID to be suffixed by MAC.
2015-09-27 14:02:25 -04:00
cd85e50e73
Added support for connected, error and debug callbacks.
2015-09-19 15:06:56 -04:00
a2bca463a0
establish parametrization via ucg_config.h
2015-09-17 21:53:48 +02:00
fde4843a75
implement all remaining function bindings
2015-09-17 21:53:48 +02:00
f0d581223f
UcgLogo example - fix drawGlyph and drawString
2015-09-17 21:53:48 +02:00
5c93ba017e
finish GraphicsTest.lua
2015-09-17 21:53:48 +02:00
ac1b5a1173
extend ucg module
2015-09-17 21:53:48 +02:00
75041a32b5
initial setup of ucg module
...
Hello World example is working
2015-09-17 21:53:48 +02:00
0f1a168525
add ucg module
2015-09-17 21:53:48 +02:00
6dc0dfc068
import ucglib v1.3.3
...
https://github.com/olikraus/Ucglib_Arduino
2015-09-17 21:53:47 +02:00
8982d370f2
Removed #define for forcing storage on flash
2015-09-17 14:30:46 -04:00
5161081c1c
Updated comment for mqtt.client parameters.
2015-09-15 23:11:20 -06:00
3d5c54cef7
Moved all debug prints into the NODE_DEBUG macro.
2015-09-14 18:43:09 -04:00
3a05c3e402
Moved CONST data to occupy flash, and remove storage instructions for functions.
2015-09-12 12:07:53 -04:00
e2ada487f3
Added ENDUSER_SETUP module.
...
The module will start a SoftAP, DNS, HTTP server acting as a captive portal.
The portal will have the SSID SetupGadget and will serve a website where
credentials for the end users WLAN can be submitted.
Once valid credentials have been submitted and used to connect to the
local WLAN this module will stop.
This module requires USE_DNS to enabled in dhcpserver.h
2015-09-10 18:40:39 -04:00
524cec539f
Added mqtt clean session support.
2015-09-05 12:54:13 -06:00
52ef3c9102
Fixed bug WIFI AUTH_OPEN #623
...
Fixed a bug which prevented from setting unprotected AP
2015-08-31 17:53:38 +02:00
537cd68078
Made device package and address configurable at runtime
2015-08-23 15:59:49 +02:00
0f6a0c59a1
Documentation update
2015-08-23 14:52:15 +02:00
fd93a09a88
Code formatting fixes
2015-08-23 02:29:52 +02:00
0caf745d8e
Improve lua API interface
2015-08-23 01:42:39 +02:00
159e9c6ace
make modulename lowercase
2015-08-22 17:55:07 +02:00
d1758aee1b
return correct number of variables
2015-08-22 17:54:26 +02:00
483dbebe24
Return error when calling functions before init
...
TSL2561_ERROR_NOINIT
2015-08-22 14:26:42 +02:00
335ea87964
Glue to integrate with nodeMCU
...
makefiles etc
2015-08-22 14:25:47 +02:00
6cb90ea924
First commit
2015-08-22 00:15:28 +02:00
1287a8cdd6
BMP085: Fix B5 calculation
...
B5 was calculated with some precision loss before.
2015-08-16 11:57:12 +02:00
40111c1046
Merge pull request #600 from devsaurus/dev-node_compile
...
Add write error detection in node_compile()
2015-08-11 09:36:35 +08:00
d0e6ab38df
add write error detection in node_compile()
2015-08-11 00:08:49 +02:00
ca1bc2cb18
clean u8g
2015-08-09 16:38:08 +02:00
02294955c5
Merge remote-tracking branch 'upstream/dev' into dev
2015-08-05 21:55:35 +02:00
9d8c3a7b82
fix u8g device destructor
...
don't free unallocated memory
2015-08-05 21:52:56 +02:00
ad49c5dd3b
Merge pull request #589 from kbeckmann/pr_bmp085
...
Implemented BMP085 module
2015-08-05 23:21:03 +08:00
a1bb3a6ad8
Merge pull request #586 from DiUS/ram-saving
...
Reclaim ~1.5k RAM by tuning down SPIFFS cache, use dynamic DNS table names
2015-08-05 23:19:24 +08:00
0b28056959
Implemented BMP085 module
2015-08-03 17:07:56 +02:00
4a47813e20
Reduced SPIFFS cache, freeing ~0.5k RAM.
...
Also made the cache on/off configurable via user_config.h. Uncached writes
are not a very good idea, but for read-only deployments a further ~0.5k RAM
can be gained by disabling the cache.
Tweaked the file.read() workhorse to read large chunks at a time rather
than use getc(), to compensate for potential unavailability of cache.
2015-07-31 18:15:18 +10:00
719abca418
Stop cjson from killing the node on out-of-mem.
2015-07-31 11:36:46 +10:00
00e1e6bcbe
Merge pull request #572 from devsaurus/dev
...
Upgrade u8g module and add display bindings
2015-07-26 22:55:52 +08:00
f4f62fb255
fix display table construction
2015-07-21 20:37:44 +02:00
6fd106afac
added more displays:
...
sh1106_128x64_i2c
ssd1306_64x48_i2c
ssd1309_128x64_i2c
ssd1327_96x96_gr_i2c
uc1611_dogm240_i2c
uc1611_dogxl240_i2c
ld7032_60x32_hw_spi
pcd8544_84x48_hw_spi
pcf8812_96x65_hw_spi
sh1106_128x64_hw_spi
ssd1306_64x48_hw_spi
ssd1309_128x64_hw_spi
ssd1322_nhd31oled_bw_hw_spi
ssd1322_nhd31oled_gr_hw_spi
ssd1325_nhd27oled_bw_hw_spi
ssd1325_nhd27oled_gr_hw_spi
ssd1327_96x96_gr_hw_spi
ssd1351_128x128_332_hw_spi
ssd1351_128x128gh_332_hw_spi
ssd1351_128x128_hicolor_hw_spi
ssd1351_128x128gh_hicolor_hw_spi
ssd1353_160x128_332_hw_spi
ssd1353_160x128_hicolor_hw_spi
st7565_64128n_hw_spi
st7565_dogm128_hw_spi
st7565_dogm132_hw_spi
st7565_lm6059_hw_spi
st7565_lm6063_hw_spi
st7565_nhd_c12832_hw_spi
st7565_nhd_c12864_hw_spi
uc1601_c128032_hw_spi
uc1608_240x128_hw_spi
uc1608_240x64_hw_spi
uc1610_dogxl160_bw_hw_spi
uc1610_dogxl160_gr_hw_spi
uc1611_dogm240_hw_spi
uc1611_dogxl240_hw_spi
uc1701_dogs102_hw_spi
uc1701_mini12864_hw_spi
2015-07-20 23:11:13 +02:00
b837726013
simplify device/display macros
2015-07-20 22:07:59 +02:00
8bd3d7d2bf
introduce lua_api_name parameter when building the display table
...
keeps the API as before and gets rid of hw_spi vs sw_spi topics
2015-07-19 21:57:14 +02:00
8d68ad7e15
Updated SPIFFS to 0.3.2, plus alignment fix.
2015-07-17 13:40:55 +10:00
1bc156e4d1
move display constructors into template-based functions
...
+ uniform generaration
+ addition of further displays
- slight unneccesary heap allocation when display drivers are included but not used
2015-07-16 23:23:43 +02:00
02d473dab0
revert local changes to u8glib
2015-07-16 21:31:00 +02:00
239008d5b9
Merge pull request #553 from nodemcu/dev096
...
Merge Dev096 to Dev
2015-07-14 15:02:37 +08:00
0020c1d167
added code to check if in softap mode before continuing event monitor
...
callback
2015-07-13 22:12:16 -07:00
be79d1d3b6
added wifi station event monitor
2015-07-13 21:13:26 -07:00
6538d22d1f
Improved ws2812 implementation
...
- Fixes the "first led problem" (#534 #487 ).
- Adds support for 160MHz mode.
- Optimized timings. Time to write pixels is reduced by about 25%
This is useful when having a large amount of chained LEDs (>500).
2015-07-12 13:43:33 +02:00
98b2bffa75
Merge pull request #545 from DiUS/rtc
...
RTC and advanced timekeeping
2015-07-11 12:17:51 +08:00
dd38a0a0e6
Imported reworked rtctime support.
2015-07-10 16:16:25 +10:00
09410d55c6
Added SNTP module, for easy time sync.
...
Integrates with the rtctime component if it's available.
2015-07-10 15:12:31 +10:00
67e72c45df
Imported RTC FIFO component + added Lua interface.
...
The rtcfifo module uses RTC memory to store sensor samples across deep-sleeps,
making it possible to batch up samples for less frequent uploads. This
component uses 9 RTC memory slots for control, and a variable number of
slots for sample storage (see rtcfifo.prepare() on how to control the
size/location of the latter).
When used together with the rtctime module, it also exposes the convenience
function rtcfifo.dsleep_until_sample() which can be used to easily take
readings on a regular basis without having to manually take into account
time spent awake to get an accurate sleep time.
The format used for storing samples is quite dense, and allows for 16 bits
of data in a fixed point format (per sample).
2015-07-10 15:12:31 +10:00
2187424928
Imported RTC+sleep timekeeping from an internal DiUS project.
...
Added Lua module rtctime to interface with it.
This keeps as accurate time as is possible on the ESP8266, including across
deep sleeps (provided rtctime.dsleep() is used rather than node.dsleep()).
Intended to be used together with NTP for high accuracy time keeping. The
API is via rtctime.{get,set}timeofday(), working from Unix epoch.
Note that 160MHz CPU clock is not currently supported by the rtctime code,
as it is only aware of the 52MHz boot clock and the regular 80Mhz default
clock.
See rtctime.h for detailed info on how this all works.
2015-07-10 15:12:31 +10:00
1a613effeb
Imported RTC access from a DiUS internal project.
...
Added Lua access module named "rtcmem" for read/write of RTC user module.
2015-07-10 15:10:15 +10:00
6ad2666182
Declare wifi.ap.getconfig() in the right map.
2015-07-10 14:01:38 +10:00
67d785ffec
Restore default data and init data before system restore.
2015-07-04 04:27:59 +08:00
89aaf475d0
Add node.restore().
...
If NodeMCU can't connect Wi-Fi, please use it.
After reboot, all will be OK.
RESTORE ITEMS:
wifi_station_set_auto_connect, wifi_set_phy_mode, wifi_softap_set_config, wifi_station_set_config, wifi_set_opmode.
2015-07-04 03:54:22 +08:00
2224f24dad
Merge branch 'dev096' of https://github.com/nodemcu/nodemcu-firmware into dev
2015-07-04 02:31:15 +08:00
638bf7b023
Merge branch 'dev' of https://github.com/nodemcu/nodemcu-firmware into dev
2015-07-04 02:28:31 +08:00
fb0e4722b8
Fix and support Wi-Fi smart link (esp-touch and air-kiss).
...
Espressif open-source android and iOs APP,
See also https://github.com/espressifapp
Note: Must use ESP-TOUCH-V021 in espressif app history.
2015-07-04 02:27:51 +08:00
3d3c2431b3
Added WS2801 support
2015-07-02 00:50:26 +02:00
125d2173d6
Merge pull request #519 from md5crypt/tmr_module
...
rewrote the timer module from scratch
2015-06-30 15:50:08 +08:00
2691383696
added tmr.interval
2015-06-29 23:15:30 +02:00
c1d2eb413b
rewrote the timer module from scratch
2015-06-29 21:19:24 +02:00
aa710d1f53
Merge pull request #513 from NodeUSB/dev096
...
update 433MHz transmission comment, add static ICACHE_FLASH_ATTR flag
2015-06-28 14:55:07 +08:00
66ca7f6aca
update 433MHz transmission comment, add static ICACHE_FLASH_ATTR flag
2015-06-27 18:14:24 -04:00
cf72a3203d
update 433MHz transmission doc, add static ICACHE_FLASH_ATTR flag
2015-06-27 14:42:39 -04:00
663158e4ab
added wifi.ap.getconfig() by @md5crypt https://github.com/nodemcu/nodemcu-firmware/pull/500/files#diff-81824fe90d00138d98b6e9f0d7d8c7dcL1458 .
2015-06-27 12:30:36 +08:00
a32df17579
Fixed net.dns.getdnsserver() by @md5crypt.
2015-06-27 12:26:24 +08:00
7bd10e8a17
Added node.bootreason() to inspect boot cause.
2015-06-27 12:34:03 +10:00
277c6d0116
move u8g progmem constants to new .rodata sections
...
this simplifies the overall memory handling based on the irom support by @jmattsson
2015-06-25 00:38:11 +02:00
5ca807d7a1
fixed net.dns.getdnsserver() and added wifi.ap.getconfig()
2015-06-24 22:38:37 +02:00
04c03b00ae
@jorgempy We change the API of DNS callback format back
...
Make the net api universe Callback Format -> function(conn,ip)
2015-06-20 19:10:01 +08:00
90ca92ca6e
Revert "Merge dev to dev096"
2015-06-20 01:50:29 +08:00
3430e5f826
Add __attribute__((optimize("O2"))) to ws2812 module.
2015-06-20 01:40:45 +08:00
87341547d7
Update DHTlib, supported DHT11 or DHTxx automatic detection.
...
Using @MarsTechHAN 's method.
New usage:
status, temp, humi, tempdec, humidec = dht.read( id )
print( dht.read( id ) )
= dht.read( id )
2015-06-18 20:53:52 +08:00
af56aea1e8
Update dhtlib api, support both integer and float version.
2015-06-18 17:19:55 +08:00
899935e60b
Add DHT Lua Module for interfacing with the DHTxx sensors (xx = 11-21-22-33-44).
2015-06-18 16:31:40 +08:00
7df0a45b07
add 433MHz transmission
2015-06-11 18:05:27 -04:00
a8622795a7
add 433MHz transmission
2015-06-11 18:05:18 -04:00
8044014f96
Merge pull request #471 from nodemcu/dev
...
Merge dev into dev096
2015-06-08 14:04:28 +08:00
9dc71cfec0
Trying to fix
...
Problem with multiple MQTT subscriptions #459
https://github.com/nodemcu/nodemcu-firmware/issues/459
Fix possible wrong buffer pointer increment.
2015-06-07 12:45:55 +02:00
ef4e6fa95f
Merge pull request #467 from DiUS/newcrypto
...
Crypto module improvements
2015-06-05 13:01:38 +08:00
7867fd083c
Move crypto things to irom0.text segment.
...
This releases 1168 bytes back to the heap.
2015-06-05 13:03:08 +10:00
fdcb982351
Trying to fix
...
Problem with multiple MQTT subscriptions #459
https://github.com/nodemcu/nodemcu-firmware/issues/459
Fix possible wrong buffer pointer increment.
2015-06-04 11:46:20 +02:00
3cd5a6a1ed
Merge branch 'master' of https://github.com/bruceme/nodemcu-firmware into dev
...
Conflicts:
app/modules/net.c
2015-06-04 15:04:12 +08:00
2d1e69151e
Extended Lua crypto module with hash & hmac.
2015-06-02 18:17:30 +10:00
353209fb4e
Change comments for wifi.sta.getap
2015-05-31 22:45:43 -07:00
a5fe3d0146
Added option to wifi.sta.getap to allow changing output format between
...
new style and old style
2015-05-31 21:43:03 -07:00
d8a8746b9e
Merge pull request #447 from creationix/dev
...
Add crypto module.
2015-05-29 15:05:37 +08:00
2128c42f02
Add headers for discovered rom functions
2015-05-28 15:10:12 -05:00
59df376a3a
Rename base64Encode to toBase64 and hexEncode to toHex
2015-05-28 09:00:13 -05:00
c8145434c3
Add crypto.hexEncode and crypto.mask
2015-05-28 07:47:09 -05:00
ca78b9ea2c
Add crypto module initially containing sha1 and base64_encode.
2015-05-28 07:46:57 -05:00
c29edf7a22
app/modules/ws2812.c: re-add ws2812.write()
...
Add the original ws2812.write() function which does not scramble the
buffer while preserving the 'new' ws2812.writergb.
With this everybody should be happy again
2015-05-26 23:12:38 +02:00
f7a6183853
Merge pull request #437 from dnc40085/dev096_adc.vdd33_fix
...
Added fix to adc.readvdd33() to prevent crashing in station mode
2015-05-24 07:23:16 +08:00
2d0689142c
Merge pull request #438 from dnc40085/dev096_wifi.getchannel
...
added wifi.getchannel
2015-05-24 07:23:07 +08:00
6477f5f389
added wifi.getchannel
2015-05-22 19:42:21 -07:00
dd00e31027
Added fix to adc.readvdd33() to prevent crashing in station mode while
...
connected
2015-05-22 18:01:05 -07:00
7244d51b38
Fixed bug in wifi_scan_done
2015-05-20 02:21:46 -07:00
fc8fa2cc91
Fixed readvdd33 bug.
2015-05-19 20:11:15 +08:00
0f3ade36d8
Merge branch 'dev' of https://github.com/nodemcu/nodemcu-firmware
...
Conflicts:
app/modules/net.c
2015-05-19 20:06:03 +08:00
546bca00c1
changed wifi_setip() to allow setting SoftAP gateway to 0.0.0.0
2015-05-17 19:29:26 -07:00
70580dc4ae
added net.dns.setdnsserver('ip',[index]), net.dns.getdnsserver([index]), net.dns.resolve('domain.com', function cb('ip' or nil if fail) )
...
modified: app/modules/net.c
2015-05-16 20:53:31 -04:00
61f65fb02a
Merge pull request #420 from devsaurus/dev
...
Add missing functions for u8g
2015-05-16 20:26:50 +08:00
5b588b7bd3
implement getStrWidth() and setFontLineSpacingFactor()
2015-05-15 21:32:28 +02:00
de56cb084e
sort member functions
2015-05-15 21:13:59 +02:00
71469dd70f
Merge branch 'dev' of https://github.com/nodemcu/nodemcu-firmware
...
Conflicts:
app/include/user_version.h
app/modules/node.c
app/modules/wifi.c
2015-05-15 08:13:46 +08:00
43d06459a6
Merge pull request #409 from dnc40085/dev096-wifi_scan_done
...
Change format of table that is output by wifi_scan_done function
2015-05-15 07:54:48 +08:00
60e1e8ba7d
Merge pull request #408 from dnc40085/dev096-wifi.ap.config
...
Additions and changes to wifi module
2015-05-15 07:54:42 +08:00
55cff23f64
Merge pull request #405 from dnc40085/dev096-wifi.setmac_fix
...
Fix for inability to use standard formatted MAC address with wifi.setmac()
2015-05-15 07:54:34 +08:00
d30fea9bd0
Merge pull request #413 from dnc40085/dev096-tmr.alarm_memory_leak_fix
...
Fix for issue #382
2015-05-15 07:49:49 +08:00
a5d96f4719
Merge pull request #404 from dnc40085/dev096-wifi.sta.getconfig
...
Add function wifi.sta.getconfig() and more parameters to wifi.sta.config()
2015-05-15 07:45:56 +08:00
894fcc4799
minor change
2015-05-14 04:59:55 -07:00
4f097cf063
Fixed memory leak in tmr.alarm()
2015-05-14 04:40:57 -07:00
cf32376467
Minor change to wifi.sta.getap()
2015-05-11 21:02:46 -07:00
e9081a81a5
Remove conflict
2015-05-11 20:03:02 -07:00
3941977550
Removed commented lines from previous commit
2015-05-11 18:45:27 -07:00
78cb215bb2
Changed output format of table that is output by wifi_scan_done
2015-05-11 18:26:16 -07:00
f31671044d
Fixed error in wifi_station_listap
2015-05-11 17:59:51 -07:00
aca2b7724b
Added description to wifi_station_listap
2015-05-11 05:38:23 -07:00
cf54f85549
Added ability to set scan configuration to wifi.sta.getap
2015-05-11 05:12:34 -07:00
5b375cfe50
Copied changes from dev branch, commit f13c5c6 from Wayne Bartnick
...
wifi.sta.config (wifi_station_config):
- range checking password length (8~64)
wifi.ap.config (wifi_ap_config):
- range checking ssid length (1~32)
- range checking pwd length (8~64)
- new params:
- auth: wifi.OPEN, wifi.WPA_PSK, wifi.WPA2_PSK, wifi.WPA_WPA2_PSK
- default WITH pwd: wifi.WPA_WPA2_PSK
- default WITHOUT pwd: wifi.OPEN
- channel: 1~13 (default: 6)
- hidden: 0/1 (default: 0)
- max: 1~4 (default: 4)
- beacon: 100~60000ms (default: 100)
wifi.ap.getclient (wifi_ap_listclient):
- returns table(mac,ip) of all connected clients
wifi.ap.dhcp:
- new submodule
- config (wifi_ap_dhcp_config), returns start/end ips
- params:
- start (e.g., "192.168.1.100")
- end ip calculated from wifi.ap.config.max
- start (wifi_ap_dhcp_start), returns boolean
- stop (wifi_ap_dhcp_stop), returns boolean
2015-05-11 05:06:48 -07:00
c6c8bd84a0
minor change to wifi.sta.config()
2015-05-11 00:05:28 -07:00
7533a6afba
Fix for inability to use standard formatted MAC address with
...
wifi.setmac() also changed wifi.getmac() to use macro
2015-05-09 04:29:18 -07:00
f9e0e0cc61
Added examples to description of wifi.sta.config()
2015-05-09 04:17:35 -07:00
e667b2029d
Added function wifi.sta.getconfig()
...
Added more parameters to wifi.sta.config()
2015-05-09 01:50:35 -07:00
bc7b9f86c4
Allow connecting to unsecured WiFi networks
2015-05-07 15:12:57 +02:00
700ba55d26
Fix for memory leak in function wifi.sta.getap()
2015-05-07 05:02:59 -07:00
1923280572
Merge pull request #365 from nodemcu/master
...
Add ICMP ping to net module
2015-05-01 14:57:50 +08:00
f4a9de4886
Added comments for setphymode and getphymode functions in wifi module
...
Added constants PHYMODE_B, PHYMODE_G, PHYMODE_N to wifi module
2015-04-29 00:06:06 -07:00
900c43d520
Add setphymode and getphymode to wifi module
2015-04-26 20:03:44 -07:00
f68d41608e
Add multicastJoin and multicastLeave to net module
...
net.multicastJoin(if_ip, multicast_ip)
net.multicastLeave(if_ip, multicast_ip)
if_ip is a string containing the interface ip to join/leave the
multicast group. multicast_ip is the multicast ip of the group to
join/leave. if_ip can be "" or "any" to affect all interfaces.
2015-04-15 03:41:13 -05:00
81d9f8893a
fix #353
2015-04-12 23:34:11 +08:00
f19e24c7ac
Update tmr.c
...
According to NodeMCU team recommendations.
2015-04-10 14:56:17 +05:00
e61ad9d7ba
Merge pull request #339 from wladurner/issue_321
...
fixes issue #321 "ws2812.writergb scrambles buffer" reported by makefu.
2015-04-06 21:26:04 +08:00
a333d6a9b9
Merge pull request #333 from wbartnick/dev
...
wifi submodule enhancements, thanks to @wbartnick
2015-04-05 23:09:33 +08:00
ff85cf4371
fixes issue #321 "ws2812.writergb scrambles buffer" reported by makefu.
...
Don't modify Lua-internal lstring - use a copy instead.
2015-04-05 15:49:32 +02:00
f13c5c61e6
wifi.sta.config (wifi_station_config):
...
- range checking password length (8~64)
wifi.ap.config (wifi_ap_config):
- range checking ssid length (1~32)
- range checking pwd length (8~64)
- new params:
- auth: wifi.OPEN, wifi.WPA_PSK, wifi.WPA2_PSK, wifi.WPA_WPA2_PSK
- default WITH pwd: wifi.WPA_WPA2_PSK
- default WITHOUT pwd: wifi.OPEN
- channel: 1~13 (default: 6)
- hidden: 0/1 (default: 0)
- max: 1~4 (default: 4)
- beacon: 100~60000ms (default: 100)
wifi.ap.getclient (wifi_ap_listclient):
- returns table(mac,ip) of all connected clients
wifi.ap.dhcp:
- new submodule
- config (wifi_ap_dhcp_config), returns start/end ips
- params:
- start (e.g., "192.168.1.100")
- end ip calculated from wifi.ap.config.max
- start (wifi_ap_dhcp_start), returns boolean
- stop (wifi_ap_dhcp_stop), returns boolean
2015-04-05 09:21:16 -04:00
bcbde08bf7
fix mqtt keepalive ping, add a example for mqtt in lua_examples.
2015-04-05 02:22:51 +08:00
8558641190
add gpio.serout() api to help serialize bit out
2015-04-03 16:05:14 +08:00
1c2ee75a00
fix mqtt, do a format when wrong flash size is detected
2015-04-03 00:51:02 +08:00
32e062f523
polish mqtt module
2015-03-31 23:38:28 +08:00
dcb6e53af7
add auto-reconnect option to mqtt:connect api
2015-03-31 00:36:44 +08:00
09750b5653
add queue to mqtt module
2015-03-30 00:24:09 +08:00
3dd1ac3739
Move node.readvdd33 to adc.readvdd33, fix #162 .
2015-03-27 00:52:55 +08:00
d5731dd9bd
merge from dev
2015-03-20 20:15:38 +08:00
1562215905
Merge pull request #301 from devsaurus/dev
...
Use correct function for stop in U8G_COM_MSG_WRITE_BYTE
2015-03-19 12:17:11 +08:00
2d254bd47c
use correct function for stop in U8G_COM_MSG_WRITE_BYTE
2015-03-18 22:33:16 +01:00
3d14530b80
fix cjson.encode() when in integer version
2015-03-18 19:37:47 +08:00
3aead6d230
try to fix cjson.encode in integer only version
2015-03-18 17:01:01 +08:00
a01bda03dd
Merge pull request #294 from nodemcu/json
...
Json branch merged to master
2015-03-18 13:11:11 +08:00
87598c5dfe
Merge remote-tracking branch 'upstream/dev' into dev
2015-03-17 20:35:39 +01:00
808a359eb8
quick fix when wide charactor issue
2015-03-17 22:42:22 +08:00
b648e9a8db
Added node.setcpufreq(mhz) function.
...
This function allows setting the CPU frequency to node.CPU80MHZ or
node.CPU160MHZ.
2015-03-17 10:23:45 +01:00
45e7f270cc
Merge branch 'dev' into json
2015-03-17 00:13:15 +08:00
54004a4beb
fix cjson bugs and reduce mem usage
2015-03-16 23:59:57 +08:00
d425dd7127
under develop
2015-03-16 17:09:43 +08:00
9c0c960e84
json port from cjson. not work yet
2015-03-16 09:00:33 +08:00
4d5242e1b7
Merge pull request #284 from nodemcu/dev
...
Sync from dev to dev096.
2015-03-16 05:44:51 +08:00
5c84359b5c
ROM flash size can changed with detected size, fixed #283 .
2015-03-16 05:40:43 +08:00
3124bcf357
Merge remote-tracking branch 'upstream/dev' into dev
2015-03-15 22:06:30 +01:00
0b01f28c62
Merge branch 'dev' of https://github.com/nodemcu/nodemcu-firmware
...
Conflicts:
app/include/user_modules.h
app/include/user_version.h
2015-03-16 01:13:03 +08:00
dfce182622
Paste new version, make it can get correct flash size.
2015-03-16 00:51:47 +08:00
ed87cbd96f
Try to fix flash auto detection bug.
2015-03-16 00:48:28 +08:00
0b95ae08a2
default build with coap, reduce coap module mem usage
2015-03-15 20:12:29 +08:00
c46000069d
reduce coap module memory usage
2015-03-15 13:44:50 +08:00
3b37f0920c
res optional
2015-03-13 22:22:57 +01:00
429bf57d67
add pcd8544
2015-03-12 23:09:41 +01:00
b387ba93ec
introduce u8g_config.h
2015-03-12 21:50:57 +01:00
7b160da1a3
Merge remote-tracking branch 'upstream/dev' into dev
2015-03-12 21:16:39 +01:00
4f55ee4e34
validate SPI comm interface with ssd1306_128x64_spi
2015-03-11 21:53:45 +01:00
d28a2c9eda
add interger version release, fix #234 , #252 , #246
2015-03-11 13:21:19 +08:00
24411d34c1
fix tmr.time()
2015-03-11 08:59:00 +08:00
81ea8d9597
add math, add file.fsinfo(), update spiffs.
2015-03-10 01:12:36 +08:00
76a499313f
Merge remote-tracking branch 'upstream/dev' into dev
2015-03-07 21:54:37 +01:00
9d0c733073
Merge branch 'dev' into dev096
2015-03-06 16:46:37 +08:00
45f6abd448
merge coap
2015-03-06 16:24:55 +08:00
13b08cdacf
add macro to control built-in lib for lua, add libm.a
2015-03-06 15:55:24 +08:00
6ea3d6390c
Merge branch 'dev' of https://github.com/nodemcu/nodemcu-firmware
...
Conflicts:
app/include/user_config.h
ld/eagle.app.v6.ld
2015-03-06 14:02:58 +08:00
bbef457e50
seperate user_config.h to speed-up compile when modules disabled/enabled
2015-03-06 11:59:04 +08:00
315d1a1696
Merge remote-tracking branch 'upstream/dev' into dev
2015-03-04 22:18:26 +01:00
ab1eb0b93b
Accidentally removed ROM_MODULES_U8G
...
I am sorry, I made an error in my last pull request and accidentally
removed ROM_MODULES_U8G. Here is it back again.
2015-03-03 20:51:16 +01:00
484dbf2683
Changed the ws2812 byte order from GRB to RGB
...
There seems to be interest in using the more intuitive RGB byte order to
specify the LED color. Also fixed the documentation.
2015-03-03 14:51:49 +01:00
8432e8c8be
Changed the ws2812 byte order from GRB to RGB
...
There seems to be interest in using the more intuitive RGB byte order to
specify the LED color. Also fixed the documentation.
2015-03-03 10:20:02 +01:00
5f1d324059
remove caching
2015-03-01 23:45:25 +01:00
32774d428c
handle font data as light userdata
2015-03-01 23:11:24 +01:00
7ae293d566
set free'd pointer to NULL
2015-02-25 23:17:08 +01:00
c869eddb8a
Update file.c
...
Made file.seek() return nil on error / EOF, as specified in documentation, instead of returning true.
2015-02-25 14:34:07 -05:00
2cfb86b5b5
improve device and page buffer initialization
2015-02-20 21:15:38 +01:00
e3ed4fc0da
fix typo
2015-02-20 18:24:53 +01:00
6c0adbf980
SPI comm function, untested
2015-02-20 11:07:52 +01:00
81be529d68
preparation for adding more display devices: allocate and construct page buffer
...
dynamically to save heap for unused device types
2015-02-19 16:47:41 +01:00
8e42631a81
implement drawBitmap
2015-02-19 12:12:14 +01:00
a287020096
implement drawXBM
2015-02-18 23:57:34 +01:00
86f0a7307f
Roll back system_get_vdd33 to readvdd33.
...
Bug not fixed in this version =(
2015-02-16 13:08:37 +08:00
05fe3ea9f1
Update to SDK 0.9.6_b1
...
The open source LWIP is broken, use espressif's liblwip.a.
Uses system_get_vdd33 instead of readvdd33.
The espressif's sdk0.9.6 beta1 (2015.02.15) release note
1、Optimize smartconfig to version v0.8；
2、Optimize AT to version 0.22.b1；
1>、Fixed bugs；
2>、Optimize the speed of transparent transmission；
3、Optimize boot to version 1.3(b3)；
1>、Fix compatibility problem of dual flash ；
4、Solve problem of the large current in deep sleep；
5、Fixed problem “check mem fail”；
6、Fixed problem of UDP socket may stop listening broadcast packet after a long time running under some special router；
7、Fixed bug related to wifi_station_scan;
8、Other optimize to make the software more reliable；
2015-02-16 11:37:39 +08:00
655b06b48e
Merge remote-tracking branch 'upstream/dev' into dev
2015-02-13 21:59:34 +01:00
2c5c00a56a
add net.socket:getpeer() api, returns peer ip,port
2015-02-14 02:38:15 +08:00
6e840a453f
add node.compile() api
2015-02-13 15:11:59 +08:00
059a5eebdd
wifi.ap.setip() can set ip address now, fixed #199 .
2015-02-12 22:43:48 +08:00
856b8553bf
comment out ws2812 temporary. remove node.led, node.key
2015-02-12 11:05:28 +08:00
2d711bbc0d
update spiffs to 0.2.2, add file.rename api
2015-02-11 21:20:54 +08:00
5fa0a0bc46
cache pgm read data
2015-02-10 22:04:43 +01:00
f2c881db18
Merge remote-tracking branch 'upstream/dev' into dev
2015-02-10 21:40:29 +01:00
a9398b1dd4
Merge pull request #196 from Point-less/master
...
Added the hold and unhold methods to tcp socket
2015-02-09 22:17:13 +08:00
929d4aed5c
Added the hold and unhold methods to tcp socket
2015-02-09 03:00:18 -03:00
0fe694b10f
Merge pull request #192 from dereulenspiegel/ws2812
...
Add support for WS2812 based LED strips
2015-02-09 12:39:49 +08:00
fdab682776
implement begin()
2015-02-08 21:41:02 +01:00
0b7ef1f485
implement further functions
2015-02-08 21:21:26 +01:00
27d99643df
rotation functions
2015-02-08 17:59:09 +01:00
145a0f01c8
add scaling functions
2015-02-08 17:17:04 +01:00
dec47d5372
fix #185
2015-02-07 23:45:01 +08:00
c529d56a8f
minor fix to debug mode
2015-02-07 23:08:25 +08:00
0bbaedac89
Renamed lgpio_ws2812 to match lua method name and fixed formatting
2015-02-07 07:05:41 +01:00
d7f04a1de8
further reduce RAM usage, consolidate font memory and "PROGMEM"
2015-02-06 23:02:56 +01:00
284ee8c46e
Added attribution and fixed documentation in comments
2015-02-05 18:47:08 +01:00
c30002b8df
Fixed typo in method name
2015-02-05 18:43:29 +01:00
0950e48925
Added support for WS2812 LEDs as a new module
2015-02-05 18:40:46 +01:00
5fbc4b2b2f
route i2c sla to com driver function via u8g_t struct
2015-02-04 23:57:13 +01:00
3077990a66
remove FLASH_ATTR
2015-02-05 01:58:47 +08:00
4754064ecf
add coap module, see fragment.lua for usage
2015-02-05 01:32:57 +08:00
9f0b167832
improve font handling
...
* macros established to build a table of fonts which get compiled into the image
* font data is mapped to irom0 to save dram space
* quirky function to retrieve font data 4-byte aligned from irom0
2015-02-04 00:08:39 +01:00
12a546ce3d
Merge remote-tracking branch 'upstream/master'
2015-02-03 20:49:18 +01:00
6dfb82dbba
factor out integer argument processing
2015-02-03 00:29:11 +01:00
c5e9d800a1
Add support multiple subscriptions, resolve nodemcu/nodemcu-firmware#152
2015-02-02 16:58:54 +07:00
ed8681f956
implemented full graphics_test
2015-02-01 17:27:20 +01:00
6b3abb004a
* increase irom0_0_seg size to accomodate u8glib code
...
* implement first functions for graphics test
2015-02-01 17:27:19 +01:00
a2672113aa
* add u8glib
...
* initializer for SSD1306 display with I2C driver
* disabled mqtt and ow modules to avoid irom0_0_seg overflow
check ld script to increase size
2015-02-01 17:27:19 +01:00
33601462ef
add u8g module stubs
2015-02-01 17:27:19 +01:00
fb0938db2e
fixes nodemcu/nodemcu-firmware#155 lwt qos, retain, change header support MQTT 3.1.1
2015-01-31 11:49:24 +07:00
5894df1da6
Combined dsleep_set_options(option) to dsleep( us, option )
...
* dsleep( us, option )
Hardware has to support deep-sleep wake up (XPD_DCDC connects to EXT_RSTB with 0R). system_deep_sleep(0) ，set no wake up timer，connect a GPIO to pin RST, the chip will wake up by a falling-edge on pin RST.
** us: Integer
time to sleep.
if us = 0, it will sleep forever.
** option: Integer
option=0, init data byte 108 is valuable;
option>0, init data byte 108 is valueless.
More details as follows:
0, RF_CAL or not after deep-sleep wake up, depends on init data byte 108.
1, RF_CAL after deep-sleep wake up, there will belarge current.
2, no RF_CAL after deep-sleep wake up, there will only be small current.
4, disable RF after deep-sleep wake up, just like modem sleep, there will be the smallest current.
2015-01-29 14:21:38 +08:00
f4214294d3
new sleep set options added (from 0.9.5 sdk)
...
usage:
-- no wakeup until rst pin to low
node.dsleep(0)
-- 4 mean no RF after deepsleep.
node.dsleepsetoption(4)
2015-01-28 18:13:19 +02:00
425e664114
fix #132 , #113 , switch to lib/libssl.a
2015-01-27 20:47:41 +08:00
4af0873122
for reading internal vdd33 pin voltage.
...
example usage and result
```
print(node.readvdd33())
3348
>
```
2015-01-26 12:17:15 +02:00
ad966146fc
migrate to sdk 0.9.5 release version
2015-01-24 23:36:04 +08:00
f676825872
merge mqtt branch to master and build pre_build bin
2015-01-23 11:48:05 +08:00
df3c82391f
add spi, and some minor fix
2015-01-18 11:46:15 +08:00
3c16014641
Add SPI Module
...
* Add SPI support (master mode only)
* Issue #50
2015-01-16 22:41:34 +02:00
724d3be198
combine getnetmask and getip
2015-01-12 19:23:55 +08:00
e86e8a650c
WifI wifi.xx.getnetmask & wifi.xx.getbroadcast methods added
2015-01-09 14:18:27 +01:00
971c4b569b
fix net.socket:send(), fix file.read() when 0xFF reached
2015-01-08 16:03:21 +08:00
b65fb02cc5
add file.format() to rebuild fs system, get more ram back
2015-01-07 15:57:17 +08:00
c04f2578ec
Updated SDK to v0.9.5 and optimized memory.
2015-01-05 10:09:51 +08:00
04a5e67443
add node.info() to get version, chipid, flash info
2014-12-31 14:26:51 +08:00
2553795b1e
add file.read() api, read(n) will read n byte.
2014-12-31 13:53:26 +08:00
a93e62c444
Add node.flashid() and node.flashsize().
2014-12-31 08:08:31 +08:00
72f60d3e5a
rebuild bin, add setip, setmac, sleeptype api to wifi module, fix #62
2014-12-30 20:17:16 +08:00
a2e357f1c1
Merge pull request #64 from alonewolfx2/patch-1
...
for set wifi issue
2014-12-30 20:04:16 +08:00
26a554ffe1
for set wifi issue
...
dhcp client must be stop before setting station ip
2014-12-30 13:57:08 +02:00
4cf5265ccc
deal with uart.on api when required char number is 0
2014-12-30 19:33:54 +08:00
5209c099a0
modify uart.on api to read raw data from uart
2014-12-30 15:42:24 +08:00
a331438c9b
add setip setmac api
2014-12-29 21:57:37 +08:00
ee8daad393
add rtc time
2014-12-29 09:29:19 +08:00
cdd13b1af3
source file first commit, folder structure refact
2014-12-22 19:35:05 +08:00
Johny Mattsson
Johny Mattsson
philip
devsaurus
jfollas
Robert Foss
Terry Ellison
Thomas Soëte
Marcel Stör
Konrad Beckmann
dnc40085
dnc40085
Huang Rui
Johny Mattsson
btsimonh
Ivan Lopez
Łukasz Oleś
Vowstar
Antoine
Jens Jensen
kvakanet
Jonathan karras
aeprox
chris
Jonathan Karras
Jakub
Luna
Mike Wen
MarsTechHAN
cal
=
makefu
Jorge Mesquita
trilader
Kevin Uhlir
zeroday
Kirill
Wolfram Ladurner
Wayne Bartnick
funshine
Markus Gritsch
Ezekiel-DA
Santiago
Till Klocke
Tuan PM
alonewolfx2
iabdalkader
unknown