e9ee9a57d1
Remove the lobject.c:88 assertion failures
...
When lua assertions are enabled, normal operation results in many:
lobject.c:88: (((t1)->tt) == 4)
lobject.c:88: (((t2)->tt) == 4)
lobject.c:88: (((t1)->tt) == 4)
lobject.c:88: (((t2)->tt) == 4)
lobject.c:88: (((t1)->tt) == 4)
lobject.c:88: (((t2)->tt) == 4)
It comes from using the pvalue() macro for 3 pointer types, where
pvalue() also checks the type of pointer and complains through the
assertion where the type == 4 (TLIGHTUSERDATA).
Use the correct macro according to the type of data being compared
to eliminate this assertion error.
Signed-off-by: Nick Andrew <nick@nick-andrew.net>
2015-12-06 01:42:29 +11:00
e71a2dd64a
Fix ECG case in concat where stack top not recalculated
2015-12-03 19:16:30 +00:00
32b2911263
Merge pull request #746 from DiUS/vdd33
...
Remove adc.readvdd33() limitation.
2015-12-01 23:37:53 +00:00
e9e2efc443
Merge pull request #794 from btsimonh/btsimonhdev
...
Added uart.alt(n) to swap to use alternate rx/tx lines.
2015-12-01 21:35:09 +11:00
6acd91810f
Merge pull request #776 from askainet/net_dns
...
Make net.dns.resolve and net.dns work with an IP address as the hostname
2015-12-01 21:24:05 +11:00
0fbf442158
Do not allow execution to continue after a PANIC!
...
It really does not improve things...
2015-12-01 18:11:38 +11:00
b2345857e9
Added uart.alt(n) to swap to use alternate rx/tx lines.
...
if n = 0 -> std pinout.
if n != 0 -> alternate pinout (gpio13 and gpio15)
2015-11-28 22:51:01 +00:00
33e41a633e
Merge pull request #787 from TerryE/dev-onewire
...
Merge Onewire changes from Master into Dev
2015-11-24 11:05:40 +11:00
455f0f2166
Merge pull request #779 from askainet/sntp_dns
...
Make sntp.sync work with DNS hostnames
2015-11-24 11:03:37 +11:00
583049f620
Merge Onewire changes from Master into Dev
...
Master contained two OW changes one of which was already reimplemented in dev using the
correct macros. The second was from hazarkarabay (f6d0c0c
2015-11-23 01:23:41 +00:00
1c2fad5330
re-add detection of CR as newline
2015-11-22 13:00:40 +01:00
b216e6a809
Merge pull request #777 from devsaurus/dev-cr
...
Skip CR in interactive mode
2015-11-20 22:56:12 +01:00
7460f034ea
Merge pull request #780 from marcelstoer/dev-order-modules-list
...
Order modules list alphabetically
2015-11-19 23:47:21 +00:00
6674a7d7f9
Add reference to HX711 documentation to source
2015-11-19 22:54:06 +01:00
5b00d02bf2
Order modules list alphabetically
2015-11-19 22:48:05 +01:00
d96383691f
Make sntp.sync work with DNS hostnames
2015-11-19 21:51:33 +01:00
69f3a6f177
skip CR in interactive mode
2015-11-18 22:07:53 +01:00
4ff9e6cc01
Make net.dns.resolve and net.dns work with an IP address host to resolve
2015-11-18 21:22:58 +01:00
a272491502
Make net.dns.resolve and net.dns work with an IP address host to resolve
2015-11-18 20:58:33 +01:00
98d0157283
Merge pull request #755 from robertfoss/dev
...
Added fix from #750 , to access the IP of a sender of a UDP packet, to fix SDK 1.4.0 compability.
2015-11-17 17:51:03 +11:00
5a199e6e63
Merge pull request #751 from lukaszo/ct
...
Allow to set content type in COAP (fix #658 )
2015-11-17 12:17:11 +11:00
d19c350ead
Added fix from #750 , to access the IP of a sender of a UDP packet, to fix SDK 1.4.0 compability.
2015-11-11 23:46:26 -05:00
1e3c231630
Fix esp_init_data_default inconsistencies.
...
Make ADC vs readvdd33 option user_config.h configurable for the init data,
and made readvdd33 the default.
2015-11-12 12:57:07 +11:00
340edbbe2f
Merge pull request #750 from lukaszo/coap-deb
...
Fix sending CoAP UDP response using new SDK 1.4.0
2015-11-12 10:41:37 +11:00
3a5e845b29
Allow to set content type in COAP ( fix #658 )
2015-11-11 12:52:13 +01:00
7ef1711e9a
Merge pull request #740 from Alkorin/ws2812
...
Better timings for WS2812 (measured 345ns/695ns, instead of 340ns/600ns)
2015-11-11 21:09:31 +11:00
63fad194e2
Merge pull request #731 from dnc40085/dev_wifi_sleep_update
...
Update function wifi.sleep
2015-11-11 17:10:10 +08:00
982be36aab
Fix sending UDP response using new SDK 1.4.0
2015-11-11 00:53:02 +01:00
ad99c016cd
Merge pull request #729 from DiUS/tcp-port-rand
...
Fix to do TCP port number randomization at boot.
2015-11-10 21:57:01 +00:00
4fd552fcaf
Better timings for 160MHz too.
...
Values measured:
@80MHz:
T0H: 337ns, Period: 1.274us
T1H: 687ns, Period: 1.25us
@160MHz:
T0H: 349ns, Period: 1.262us
T1H: 700ns, Period: 1.276us
2015-11-10 22:34:44 +01:00
dabfe83a7d
Unbreak build from #735 merge.
...
Now with more #ifdef.
2015-11-10 18:48:39 +11:00
27eed629e7
Remove adc.readvdd33() limitation.
2015-11-10 15:30:59 +11:00
7512e628b6
Merge pull request #742 from TerryE/dev-stripdebug
...
Port of strip debug patch to the SDK 1.4-baseline dev
2015-11-10 12:20:36 +11:00
cfae4cdc4e
Merge pull request #735 from karrots/mqtt_close_disconnect
...
mqtt:close() send the DISCONNECT message (fix #673 )
2015-11-10 12:08:16 +11:00
382eea5079
Fix building with DEVKIT_0_9 defined.
...
This got broken in the 1.4.0 overhaul, mea culpa.
2015-11-09 12:15:40 +11:00
83d06b667d
Port of strip debug patch to the SDK 1.4-baseline dev
2015-11-08 23:46:08 +00:00
c2f12a3b05
Better timings for WS2812 (measured 345ns/695ns, instead of 340ns/600ns)
2015-11-08 22:45:12 +01:00
b2167bdf3a
mqtt:close() send the DISCONNECT message ( fix #673 )
2015-11-06 07:32:04 -07:00
51046fd78b
Minor change to wifi.sleep
...
Remove unnecessary code
2015-11-06 05:10:24 -08:00
c39d317b2b
Fix mqtt connection closing when not publishing ( fixes #359 )
...
should not reset keep_alive_tick when receiving as this can prevent
sending keepalive (PINGREQ), which can result in server disconnect.
2015-11-05 20:21:53 -07:00
5d28de8595
Merge pull request #722 from TerryE/luac-cross.2
...
Moving luac cross from master to dev
2015-11-06 09:49:38 +11:00
5e95f48a55
Update function wifi.sleep to return any error codes to user
2015-11-05 13:51:42 -08:00
f82415f6b9
Fix to do TCP port number randomization at boot.
...
This addresses the issue where a server would otherwise reject a valid
connection attempt from a rebooted node, due to the server thinking that
packet belonged to a recently closed session. By starting off the local
TCP port numbers at random* points each boot the risk of port reuse
across a reboot is significantly reduced.
*) As random as can be had via the lower 12 bits of the ccounter.
2015-11-05 14:40:57 +11:00
3da57dc85c
Merge pull request #725 from dnc40085/dev_wifi_toggle
...
Add function wifi.sleep
2015-11-05 10:07:32 +08:00
75849f79ab
Fix compiler warning in tmr.c
...
Fix compiler warning: implicit declaration of function 'system_soft_wdt_feed'
2015-11-04 17:55:09 -08:00
91ba22a49d
Minor change
...
Added static keyword to a variable
2015-11-04 06:37:57 -08:00
d6cc6d3e68
added wifi table entry for NULLMODE
2015-11-03 18:06:41 -08:00
5c1c51642e
Fix newly introduced incorrect WDT feeding.
2015-11-04 12:46:37 +11:00
4387f90339
Added function wifi.sleep
2015-11-03 17:23:43 -08:00
0beee5c1ae
Minor tweaks to luac.cross for SDK 1.4 support
...
plus Add extra logic to handle different loci path in luac.cross
for handling 32 bit or great hex integers Also add a helpfull hint in the
build tool to point out the Lua and lfs depencencies.
2015-11-03 22:45:43 +00:00
307323d1ff
Add luac.cross capability to nodeMCU
2015-11-03 21:37:14 +00:00
a08626d84f
Add minimum debug library providing traceback() and getregistry() functions
2015-11-03 21:34:42 +00:00
e2dd98ba10
Update mqtt.c fix for #679
...
Patch for "mqtt LWT qos and retain parameters are parsed incorrectly #679"
2015-11-02 20:14:43 -07:00
95e2bbb0f0
Merge pull request #688 from karrots/mqtt-puback-fix
...
Fix for MQTT PUBACK loop
2015-11-01 14:34:12 +08:00
a38fbdbf51
Merge pull request #713 from christakahashi/hx711-support
...
Added support for the hx711 load cell ADC.
2015-11-01 14:31:12 +08:00
3e0a3e992e
Merge pull request #717 from karrots/feature/baudrate_define
...
Add #DEFINE to user_config.h to enable easier bit rate selection.
2015-11-01 14:30:57 +08:00
66e65bd3c1
Add #DEFINE to user_config.h to enable easier bit rate selection.
2015-10-31 19:47:11 -06:00
dffbfacd46
most users won't need this so it should be off be default
2015-10-30 23:31:45 -07:00
57c2e6eacd
Fix for MQTT PUBACK loop
...
Conflicts:
app/modules/mqtt.c
2015-10-29 20:02:08 -06:00
52d6be5299
Merge pull request #705 from devsaurus/dev-fdplx
...
Update full-duplex for SPI module
2015-10-28 23:36:39 +01:00
9444ae28df
simplify spi api
...
duplex_mode configuration enables/disables receiving with spi.send()
spi.send_recv removed
2015-10-27 23:30:33 +01:00
38b494c07e
Merge pull request #702 from devsaurus/dev-fdplx
...
Add full-duplex support to SPI module
2015-10-27 14:34:13 +08:00
b535be7ab8
Fix WDT resets during file.format().
...
With the new SDK soft-wdt it is no longer sufficient to tickle the hardware
watchdog, so all (found) instances have been changed to system_soft_wdt_feed().
2015-10-27 14:33:22 +11:00
0ba0370b87
fix construction of table
2015-10-26 22:40:11 +01:00
d46bc5cc1f
align spi_recv to platform_spi_send_recv
2015-10-26 22:39:33 +01:00
7d77398921
introduce full/half duplex transactions and add spi.send_recv()
2015-10-25 22:58:06 +01:00
c223ecfe5f
Merge pull request #693 from devsaurus/dev-hspi_apiext
...
Extend SPI module API with improved transaction handling
2015-10-21 22:33:08 +02:00
75488639eb
make spi.send() transparent for 32 bit data
...
accept negative values as u32
2015-10-19 23:01:59 +02:00
7ac9a46c40
support secure connection based on CLIENT_SSL_ENABLE
2015-10-18 23:04:40 +02:00
a6eb5ccb80
improved default handling of clock_div and databit length
2015-10-18 11:37:17 +02:00
26f4bc7957
ensure backwards compatibility of exising api functions
2015-10-18 11:13:57 +02:00
19092712e5
remove obsolete spi_mast_send and rename platform_spi_send
2015-10-18 11:13:56 +02:00
28a04cc9c1
remove obsoleted constants for databit length
2015-10-18 11:13:56 +02:00
f238673772
rework of (H)SPI API
2015-10-18 11:13:55 +02:00
9cde0bbb83
add SPI transaction support
2015-10-18 11:13:55 +02:00
5ab8de34e7
Fix adc.readvdd33
...
Replace undocumented readvdd33 function with SDK function system_get_vdd33
2015-10-17 15:47:17 +02:00
340ef8fc0a
Merge pull request #636 from karrots/mqtt-clean-session
...
Added mqtt clean session support.
2015-10-17 20:58:06 +08:00
8fba0f47de
Make UDP server work again after 1.4.0 API changes.
2015-10-15 12:14:27 +11:00
afdd9430e0
Removed old lwip include file.
2015-10-12 15:57:24 +11:00
f54264669b
Fixed includes after LWIP 1.4.0 upgrade.
2015-10-12 14:31:52 +11:00
5d5be35633
Upgraded LWIP to 1.4.0 released from Espressif.
...
Plus directly provided patch for user_interface.h.
2015-10-12 14:31:04 +11:00
711d464a2b
Re-enabled open source LWIP.
2015-10-12 13:26:05 +11:00
a161f882ae
Espressif-provided fix for open source LWIP on 1.4.0.
2015-10-12 13:26:05 +11:00
dec159bce1
Support for fixing the filesystem location.
...
To assist with testing new SDK.
2015-10-12 13:26:05 +11:00
bf8ed500bf
Moved node.key() & node.led() support into node module.
...
It was piggybacking on the Lua readline timer which no longer exists.
Also cleaned up injection of Lua commands via CoAP & node.input().
2015-10-12 13:26:05 +11:00
fe6289a6c2
Switch Lua input to event driven instead of polled.
...
The Lua input timer has been the thorn in the side which prevents a lot of
potential sleeping, unnecessarily.
2015-10-12 13:26:05 +11:00
67a711931a
Switch to SDK LWIP until issues with the open one can be resolved.
2015-10-12 13:26:05 +11:00
e905c24dcc
Removed unsused, now incompatible SSL code.
2015-10-12 13:26:05 +11:00
21c4e11020
Enable dynamic build dates, plus print SDK version.
2015-10-12 13:26:05 +11:00
30380f6cff
Further cleanup of ld directory.
...
Renamed the main linker script to make it clear it is customised for NodeMCU
and not to be confused with the standard linker SDK linker scripts.
Changed to using the eagle.rom.addr.v6.ld file from the SDK.
2015-10-12 13:26:04 +11:00
7d0b13df81
Bumped version string to stop confusing myself.
2015-10-12 13:26:04 +11:00
8bdde6e28d
Sorted out linker scripts & options.
...
Now boots to Lua prompt, but promptly reboots itself before input.
2015-10-12 13:26:04 +11:00
91ee5c088c
Wifi module update to new smartconfig API.
...
Needs testing.
2015-10-12 13:26:04 +11:00
38cc84d2fc
Removed gpio pulldown references.
...
The ESP never supported internal pulldowns, and the SDK now matches reality.
2015-10-12 13:26:04 +11:00
f1552605d9
Change os_update_cpu_freq... to ets_update_cpu_freq...
...
Again, the os_xxx version has been removed from the SDK.
2015-10-12 13:26:04 +11:00
d2ac5f1712
Changed os_intr_xxx to ets_intr_xxx.
...
The os_intr_xxx macros no longer exist in the SDK.
2015-10-12 13:26:04 +11:00
3b9a42e254
Updated #includes to work on new SDK.
...
Both "c_types.h" and "lwip/ip_addr.h" don't get included indirectly anymore.
2015-10-12 13:26:04 +11:00
cc220d9201
Moved TEXT_SECTION_ATTR macro to its own header.
2015-10-12 13:26:04 +11:00
8dff84e0a2
Missing file from the LWIP upgrade/import.
2015-10-12 13:26:04 +11:00
c674d191e4
Upgraded open-source LWIP.
...
From Espressif's lwip_open_src_template_proj_for_v1.3.0.zip
2015-10-12 13:26:04 +11:00
c1cd58e096
Build using 1.4.0 SDK + remove old SDK includes/libs.
...
Leaving the linker scripts intact for now, as they're quite customised.
2015-10-12 13:00:38 +11:00
140bcee2e0
comment cleanup
2015-10-08 20:44:19 -07:00
cf079fa333
Basic hx711 functionality
2015-10-08 20:34:24 -07:00
093a895980
Merge pull request #678 from devsaurus/dev-hspi_clockdiv
...
Add divider for arbitrary HSPI clock frequencies, resolves #674
2015-10-06 21:05:17 +02:00
5e19b8488f
Merge pull request #644 from robertfoss/enduser_setup
...
Added ENDUSER_SETUP module.
2015-10-05 19:18:18 +11:00
4cf5f37450
address SPI_CLKDIV_PRE requirements
...
* respect N-1
* avoid range overflow
2015-10-04 16:57:50 +02:00
ac50f9c6a5
add divider for arbitrary HSPI clock frequencies
2015-10-04 00:40:21 +02:00
8683ea4f1b
Fixed previous POST patch. Also cleaned up HTTP request handling.
2015-10-01 14:22:45 -04:00
90f770412d
Switched from HTTP GET to HTTP POST.
2015-09-30 14:11:43 -04:00
ee82b2ad12
Moved SSID define to user_config.h
2015-09-30 13:24:18 -04:00
721fadfd14
Changed SSID to be suffixed by MAC.
2015-09-27 14:02:25 -04:00
a15097659b
Disabled enduser_setup module
2015-09-19 15:22:01 -04:00
cd85e50e73
Added support for connected, error and debug callbacks.
2015-09-19 15:06:56 -04:00
a6c9ba8004
disable UCG module per default
2015-09-17 22:43:59 +02:00
154b456f11
extend ucg example with ST7735 display
2015-09-17 22:37:31 +02:00
db1162015d
prefix local routines in ucg_polygon
2015-09-17 21:53:49 +02:00
a2bca463a0
establish parametrization via ucg_config.h
2015-09-17 21:53:48 +02:00
fde4843a75
implement all remaining function bindings
2015-09-17 21:53:48 +02:00
f0d581223f
UcgLogo example - fix drawGlyph and drawString
2015-09-17 21:53:48 +02:00
5c93ba017e
finish GraphicsTest.lua
2015-09-17 21:53:48 +02:00
ac1b5a1173
extend ucg module
2015-09-17 21:53:48 +02:00
75041a32b5
initial setup of ucg module
...
Hello World example is working
2015-09-17 21:53:48 +02:00
9b384b4bda
fix u8g->ucg prefix
2015-09-17 21:53:48 +02:00
0f1a168525
add ucg module
2015-09-17 21:53:48 +02:00
6dc0dfc068
import ucglib v1.3.3
...
https://github.com/olikraus/Ucglib_Arduino
2015-09-17 21:53:47 +02:00
8982d370f2
Removed #define for forcing storage on flash
2015-09-17 14:30:46 -04:00
5161081c1c
Updated comment for mqtt.client parameters.
2015-09-15 23:11:20 -06:00
3d5c54cef7
Moved all debug prints into the NODE_DEBUG macro.
2015-09-14 18:43:09 -04:00
3a05c3e402
Moved CONST data to occupy flash, and remove storage instructions for functions.
2015-09-12 12:07:53 -04:00
e2ada487f3
Added ENDUSER_SETUP module.
...
The module will start a SoftAP, DNS, HTTP server acting as a captive portal.
The portal will have the SSID SetupGadget and will serve a website where
credentials for the end users WLAN can be submitted.
Once valid credentials have been submitted and used to connect to the
local WLAN this module will stop.
This module requires USE_DNS to enabled in dhcpserver.h
2015-09-10 18:40:39 -04:00
524cec539f
Added mqtt clean session support.
2015-09-05 12:54:13 -06:00
52ef3c9102
Fixed bug WIFI AUTH_OPEN #623
...
Fixed a bug which prevented from setting unprotected AP
2015-08-31 17:53:38 +02:00
537cd68078
Made device package and address configurable at runtime
2015-08-23 15:59:49 +02:00
0f6a0c59a1
Documentation update
2015-08-23 14:52:15 +02:00
fd93a09a88
Code formatting fixes
2015-08-23 02:29:52 +02:00
0caf745d8e
Improve lua API interface
2015-08-23 01:42:39 +02:00
29ee02f680
Revert version change
2015-08-22 22:34:54 +02:00
4df5d5c166
Fix channel1 reading
...
Give sensor more time to integrate (400ms => 404ms)
2015-08-22 21:43:29 +02:00
7095c42477
Attempt to fix reading of registers
2015-08-22 21:19:27 +02:00
159e9c6ace
make modulename lowercase
2015-08-22 17:55:07 +02:00
d1758aee1b
return correct number of variables
2015-08-22 17:54:26 +02:00
483dbebe24
Return error when calling functions before init
...
TSL2561_ERROR_NOINIT
2015-08-22 14:26:42 +02:00
335ea87964
Glue to integrate with nodeMCU
...
makefiles etc
2015-08-22 14:25:47 +02:00
223a1c8b86
Small change
2015-08-22 12:46:53 +02:00
6cb90ea924
First commit
2015-08-22 00:15:28 +02:00
346251dca6
1-Wire power fix, by Thomas Shaddack.
2015-08-20 11:09:12 +10:00
1287a8cdd6
BMP085: Fix B5 calculation
...
B5 was calculated with some precision loss before.
2015-08-16 11:57:12 +02:00
40111c1046
Merge pull request #600 from devsaurus/dev-node_compile
...
Add write error detection in node_compile()
2015-08-11 09:36:35 +08:00
d0e6ab38df
add write error detection in node_compile()
2015-08-11 00:08:49 +02:00
ca1bc2cb18
clean u8g
2015-08-09 16:38:08 +02:00
02294955c5
Merge remote-tracking branch 'upstream/dev' into dev
2015-08-05 21:55:35 +02:00
9d8c3a7b82
fix u8g device destructor
...
don't free unallocated memory
2015-08-05 21:52:56 +02:00
ad49c5dd3b
Merge pull request #589 from kbeckmann/pr_bmp085
...
Implemented BMP085 module
2015-08-05 23:21:03 +08:00
d97d7df8ec
Merge pull request #588 from robertfoss/dev
...
Use #if instead of #ifdef.
2015-08-05 23:20:38 +08:00
a1bb3a6ad8
Merge pull request #586 from DiUS/ram-saving
...
Reclaim ~1.5k RAM by tuning down SPIFFS cache, use dynamic DNS table names
2015-08-05 23:19:24 +08:00
00527237f9
Remove now-unnecessary alignment constraints in SPIFFS.
...
With platform_s_flash_read() now properly handling unaligned destination
buffers, there is no need to shim SPIFFS any more.
2015-08-04 16:30:58 +10:00
9f9b323fb5
Ensure flash write bounce buffer is used if source is also flash.
...
When using the flash write API, the flash is unmapped/uncached, and as
such it's not possible to source data directly from flash (e.g. string
literals).
2015-08-04 16:30:54 +10:00
1259f8d776
Deal with unaligned destination parameter to flash read
...
(Occurs e.g. when SPIFFS cache is disabled.)
Implementation mirrors the existing handling in the write path.
2015-08-04 16:30:46 +10:00
0b28056959
Implemented BMP085 module
2015-08-03 17:07:56 +02:00
579dc27ee0
Use #if instead of #ifdef.
2015-08-03 01:09:49 +02:00
c19596cae8
Merge pull request #581 from robertfoss/dev
...
Added USE_DNS define.
2015-08-02 23:40:37 +08:00
53a035411e
Merge pull request #584 from DiUS/cjson-lua-mem-wrap
...
Improvements to cjson memory handling, Note that when cjson fails a memory allocation, it leaks a bit of memory, it's possible to detect that it did fail, and schedule a restart.
2015-08-02 23:38:13 +08:00
125db6595d
Use dynamic memory for DNS table names, saving ~1k RAM.
2015-07-31 18:15:18 +10:00
4a47813e20
Reduced SPIFFS cache, freeing ~0.5k RAM.
...
Also made the cache on/off configurable via user_config.h. Uncached writes
are not a very good idea, but for read-only deployments a further ~0.5k RAM
can be gained by disabling the cache.
Tweaked the file.read() workhorse to read large chunks at a time rather
than use getc(), to compensate for potential unavailability of cache.
2015-07-31 18:15:18 +10:00
b583af94a5
Fixed long key bug in HMAC calculation.
2015-07-31 14:11:09 +10:00
eae72699d0
Fixed broken linear growth allocation in cjson.
2015-07-31 13:17:05 +10:00
595509a7f3
More sensible cjson realloc strategy.
2015-07-31 11:36:46 +10:00
719abca418
Stop cjson from killing the node on out-of-mem.
2015-07-31 11:36:46 +10:00
1b8e015f33
Removed some whitespace.
2015-07-28 16:34:25 +02:00
5822d4c4ed
Add define for advertising DNS in the DHCP OFFER message.
2015-07-28 16:32:38 +02:00
00e1e6bcbe
Merge pull request #572 from devsaurus/dev
...
Upgrade u8g module and add display bindings
2015-07-26 22:55:52 +08:00
f4f62fb255
fix display table construction
2015-07-21 20:37:44 +02:00
6fd106afac
added more displays:
...
sh1106_128x64_i2c
ssd1306_64x48_i2c
ssd1309_128x64_i2c
ssd1327_96x96_gr_i2c
uc1611_dogm240_i2c
uc1611_dogxl240_i2c
ld7032_60x32_hw_spi
pcd8544_84x48_hw_spi
pcf8812_96x65_hw_spi
sh1106_128x64_hw_spi
ssd1306_64x48_hw_spi
ssd1309_128x64_hw_spi
ssd1322_nhd31oled_bw_hw_spi
ssd1322_nhd31oled_gr_hw_spi
ssd1325_nhd27oled_bw_hw_spi
ssd1325_nhd27oled_gr_hw_spi
ssd1327_96x96_gr_hw_spi
ssd1351_128x128_332_hw_spi
ssd1351_128x128gh_332_hw_spi
ssd1351_128x128_hicolor_hw_spi
ssd1351_128x128gh_hicolor_hw_spi
ssd1353_160x128_332_hw_spi
ssd1353_160x128_hicolor_hw_spi
st7565_64128n_hw_spi
st7565_dogm128_hw_spi
st7565_dogm132_hw_spi
st7565_lm6059_hw_spi
st7565_lm6063_hw_spi
st7565_nhd_c12832_hw_spi
st7565_nhd_c12864_hw_spi
uc1601_c128032_hw_spi
uc1608_240x128_hw_spi
uc1608_240x64_hw_spi
uc1610_dogxl160_bw_hw_spi
uc1610_dogxl160_gr_hw_spi
uc1611_dogm240_hw_spi
uc1611_dogxl240_hw_spi
uc1701_dogs102_hw_spi
uc1701_mini12864_hw_spi
2015-07-20 23:11:13 +02:00
b837726013
simplify device/display macros
2015-07-20 22:07:59 +02:00
05e3267f24
update to u8glib 1.18.1
2015-07-19 23:22:50 +02:00
8bd3d7d2bf
introduce lua_api_name parameter when building the display table
...
keeps the API as before and gets rid of hw_spi vs sw_spi topics
2015-07-19 21:57:14 +02:00
8d68ad7e15
Updated SPIFFS to 0.3.2, plus alignment fix.
2015-07-17 13:40:55 +10:00
1bc156e4d1
move display constructors into template-based functions
...
+ uniform generaration
+ addition of further displays
- slight unneccesary heap allocation when display drivers are included but not used
2015-07-16 23:23:43 +02:00
02d473dab0
revert local changes to u8glib
2015-07-16 21:31:00 +02:00
239008d5b9
Merge pull request #553 from nodemcu/dev096
...
Merge Dev096 to Dev
2015-07-14 15:02:37 +08:00
0020c1d167
added code to check if in softap mode before continuing event monitor
...
callback
2015-07-13 22:12:16 -07:00
be79d1d3b6
added wifi station event monitor
2015-07-13 21:13:26 -07:00
6538d22d1f
Improved ws2812 implementation
...
- Fixes the "first led problem" (#534 #487 ).
- Adds support for 160MHz mode.
- Optimized timings. Time to write pixels is reduced by about 25%
This is useful when having a large amount of chained LEDs (>500).
2015-07-12 13:43:33 +02:00
98b2bffa75
Merge pull request #545 from DiUS/rtc
...
RTC and advanced timekeeping
2015-07-11 12:17:51 +08:00
dd38a0a0e6
Imported reworked rtctime support.
2015-07-10 16:16:25 +10:00
09410d55c6
Added SNTP module, for easy time sync.
...
Integrates with the rtctime component if it's available.
2015-07-10 15:12:31 +10:00
67e72c45df
Imported RTC FIFO component + added Lua interface.
...
The rtcfifo module uses RTC memory to store sensor samples across deep-sleeps,
making it possible to batch up samples for less frequent uploads. This
component uses 9 RTC memory slots for control, and a variable number of
slots for sample storage (see rtcfifo.prepare() on how to control the
size/location of the latter).
When used together with the rtctime module, it also exposes the convenience
function rtcfifo.dsleep_until_sample() which can be used to easily take
readings on a regular basis without having to manually take into account
time spent awake to get an accurate sleep time.
The format used for storing samples is quite dense, and allows for 16 bits
of data in a fixed point format (per sample).
2015-07-10 15:12:31 +10:00
2187424928
Imported RTC+sleep timekeeping from an internal DiUS project.
...
Added Lua module rtctime to interface with it.
This keeps as accurate time as is possible on the ESP8266, including across
deep sleeps (provided rtctime.dsleep() is used rather than node.dsleep()).
Intended to be used together with NTP for high accuracy time keeping. The
API is via rtctime.{get,set}timeofday(), working from Unix epoch.
Note that 160MHz CPU clock is not currently supported by the rtctime code,
as it is only aware of the 52MHz boot clock and the regular 80Mhz default
clock.
See rtctime.h for detailed info on how this all works.
2015-07-10 15:12:31 +10:00
1a613effeb
Imported RTC access from a DiUS internal project.
...
Added Lua access module named "rtcmem" for read/write of RTC user module.
2015-07-10 15:10:15 +10:00
6ad2666182
Declare wifi.ap.getconfig() in the right map.
2015-07-10 14:01:38 +10:00
67d785ffec
Restore default data and init data before system restore.
2015-07-04 04:27:59 +08:00
b6e431ebed
Merge branch 'dev' of https://github.com/nodemcu/nodemcu-firmware into dev
2015-07-04 03:55:02 +08:00
89aaf475d0
Add node.restore().
...
If NodeMCU can't connect Wi-Fi, please use it.
After reboot, all will be OK.
RESTORE ITEMS:
wifi_station_set_auto_connect, wifi_set_phy_mode, wifi_softap_set_config, wifi_station_set_config, wifi_set_opmode.
2015-07-04 03:54:22 +08:00
f5938dfe17
Will made some modules default off.
...
Need discussion. And turn off some modules by default.
May our community should build more version?
2015-07-04 02:51:41 +08:00
5279dc9dfc
Merge pull request #525 from kbeckmann/ws2801_disable_default
...
Disabled WS2801 module
2015-07-04 02:48:44 +08:00
2224f24dad
Merge branch 'dev096' of https://github.com/nodemcu/nodemcu-firmware into dev
2015-07-04 02:31:15 +08:00
638bf7b023
Merge branch 'dev' of https://github.com/nodemcu/nodemcu-firmware into dev
2015-07-04 02:28:31 +08:00
fb0e4722b8
Fix and support Wi-Fi smart link (esp-touch and air-kiss).
...
Espressif open-source android and iOs APP,
See also https://github.com/espressifapp
Note: Must use ESP-TOUCH-V021 in espressif app history.
2015-07-04 02:27:51 +08:00
485e5a3140
Disabled WS2801 module
2015-07-03 12:35:47 +02:00
3d3c2431b3
Added WS2801 support
2015-07-02 00:50:26 +02:00
125d2173d6
Merge pull request #519 from md5crypt/tmr_module
...
rewrote the timer module from scratch
2015-06-30 15:50:08 +08:00
2691383696
added tmr.interval
2015-06-29 23:15:30 +02:00
c1d2eb413b
rewrote the timer module from scratch
2015-06-29 21:19:24 +02:00
aa710d1f53
Merge pull request #513 from NodeUSB/dev096
...
update 433MHz transmission comment, add static ICACHE_FLASH_ATTR flag
2015-06-28 14:55:07 +08:00
66ca7f6aca
update 433MHz transmission comment, add static ICACHE_FLASH_ATTR flag
2015-06-27 18:14:24 -04:00
cf72a3203d
update 433MHz transmission doc, add static ICACHE_FLASH_ATTR flag
2015-06-27 14:42:39 -04:00
dce0d2c2a8
Release build 20150627.
...
fixed ap/station-ap cannot connect to the device.
added wifi.ap.getconfig().
fixed net.dns.getdnsserver().
added new base64 lua example.
added node.bootreason() to inspect boot cause.
optimization of u8g.
2015-06-27 15:21:48 +08:00
663158e4ab
added wifi.ap.getconfig() by @md5crypt https://github.com/nodemcu/nodemcu-firmware/pull/500/files#diff-81824fe90d00138d98b6e9f0d7d8c7dcL1458 .
2015-06-27 12:30:36 +08:00
a32df17579
Fixed net.dns.getdnsserver() by @md5crypt.
2015-06-27 12:26:24 +08:00
2ab4de9c09
Merge pull request #512 from jmattsson/boot-reason
...
Expose boot reason in Lua
2015-06-27 11:25:35 +08:00
7bd10e8a17
Added node.bootreason() to inspect boot cause.
2015-06-27 12:34:03 +10:00
b5c6a5b1c6
Stop dhcpserver from writing to const data.
2015-06-27 12:12:21 +10:00
d507060ecf
Merge pull request #509 from devsaurus/dev-irom0
...
Unify memory section usage for u8g
2015-06-27 00:04:46 +08:00
dda121e5e0
Release 0.9.6-dev_20150625
2015-06-26 18:32:46 +08:00
277c6d0116
move u8g progmem constants to new .rodata sections
...
this simplifies the overall memory handling based on the irom support by @jmattsson
2015-06-25 00:38:11 +02:00
5ca807d7a1
fixed net.dns.getdnsserver() and added wifi.ap.getconfig()
2015-06-24 22:38:37 +02:00
b0f9788a6d
Move constants to ROM. Frees up 16k+ of RAM.
...
Accessing 8bit and 16bit constants from ROM rather than RAM comes with a
performance cost, as these loads go through the load/store exception
vector. Any performance critical constants can be forced back into RAM
as RAM_CONST_ATTR.
The entry point has changed from call_user_start() to user_start_trampoline()
in order for the exception handler to be installed early enough.
2015-06-23 15:41:14 +10:00
0c924e56c6
Support for loading sub-32 wide data from irom.
2015-06-23 15:41:14 +10:00
04c03b00ae
@jorgempy We change the API of DNS callback format back
...
Make the net api universe Callback Format -> function(conn,ip)
2015-06-20 19:10:01 +08:00
75c3cf29c2
Disable interrupts while communicating with DHTxx.
2015-06-20 02:08:20 +08:00
90ca92ca6e
Revert "Merge dev to dev096"
2015-06-20 01:50:29 +08:00
3430e5f826
Add __attribute__((optimize("O2"))) to ws2812 module.
2015-06-20 01:40:45 +08:00
cda7992c1a
Fix DHTLIB bug of DHT22, DHT21, DHT33, DHT44.
2015-06-20 00:26:59 +08:00
c56659e84d
Using __attribute__((alias("dht_read"))) reduce code size.
2015-06-19 01:05:19 +08:00
87341547d7
Update DHTlib, supported DHT11 or DHTxx automatic detection.
...
Using @MarsTechHAN 's method.
New usage:
status, temp, humi, tempdec, humidec = dht.read( id )
print( dht.read( id ) )
= dht.read( id )
2015-06-18 20:53:52 +08:00
98a2c9fdb6
Align all TAB=8 in app/Makefile, make sure it fit for github display.
2015-06-18 17:36:27 +08:00
af56aea1e8
Update dhtlib api, support both integer and float version.
2015-06-18 17:19:55 +08:00
899935e60b
Add DHT Lua Module for interfacing with the DHTxx sensors (xx = 11-21-22-33-44).
2015-06-18 16:31:40 +08:00
515a7bf1ab
Add dhtlib for DHT11/21/22/33/44, port from Arduino.
2015-06-17 16:30:12 +08:00
b0a4e4d3e9
Changed BUILD_DATE.
2015-06-17 00:16:57 +08:00
d955c8815b
add 433MHz transmission
2015-06-11 18:07:16 -04:00
7df0a45b07
add 433MHz transmission
2015-06-11 18:05:27 -04:00
a8622795a7
add 433MHz transmission
2015-06-11 18:05:18 -04:00
8044014f96
Merge pull request #471 from nodemcu/dev
...
Merge dev into dev096
2015-06-08 14:04:28 +08:00
9dc71cfec0
Trying to fix
...
Problem with multiple MQTT subscriptions #459
https://github.com/nodemcu/nodemcu-firmware/issues/459
Fix possible wrong buffer pointer increment.
2015-06-07 12:45:55 +02:00
ef4e6fa95f
Merge pull request #467 from DiUS/newcrypto
...
Crypto module improvements
2015-06-05 13:01:38 +08:00
7867fd083c
Move crypto things to irom0.text segment.
...
This releases 1168 bytes back to the heap.
2015-06-05 13:03:08 +10:00
223a936779
Switched crypto module to use ROM SHA1/MD5.
...
Also disabled MD2 support by default (see MD2_ENABLE in user_config.h).
2015-06-05 12:12:24 +10:00
fdcb982351
Trying to fix
...
Problem with multiple MQTT subscriptions #459
https://github.com/nodemcu/nodemcu-firmware/issues/459
Fix possible wrong buffer pointer increment.
2015-06-04 11:46:20 +02:00
3cd5a6a1ed
Merge branch 'master' of https://github.com/bruceme/nodemcu-firmware into dev
...
Conflicts:
app/modules/net.c
2015-06-04 15:04:12 +08:00
d855584bae
Fixed off-by-one error from refactoring.
2015-06-03 17:20:55 +10:00
06724fbb17
Renamed SHA2 support option to SHA2_ENABLE per request.
2015-06-03 11:20:16 +10:00
2d1e69151e
Extended Lua crypto module with hash & hmac.
2015-06-02 18:17:30 +10:00
32dd9b7b7a
Crypto library with unified interface.
...
Uses both existing MD2/MD5/SHA1 and the Gifford SHA256-512, unless WITHOUT_SHA2
is defined.
2015-06-02 18:15:18 +10:00
68ef22ace5
Imported Aaron Gifford's SHA{256,384,512} implementation.
2015-06-02 17:02:14 +10:00
353209fb4e
Change comments for wifi.sta.getap
2015-05-31 22:45:43 -07:00
a5fe3d0146
Added option to wifi.sta.getap to allow changing output format between
...
new style and old style
2015-05-31 21:43:03 -07:00
d8a8746b9e
Merge pull request #447 from creationix/dev
...
Add crypto module.
2015-05-29 15:05:37 +08:00
01d90f1cb0
revert app/spifs folder to commmit 8f925e6
2015-05-28 23:54:07 -07:00
1f798dabf7
Revert "Update spiffs to latest."
2015-05-28 17:38:08 -07:00
2128c42f02
Add headers for discovered rom functions
2015-05-28 15:10:12 -05:00
59df376a3a
Rename base64Encode to toBase64 and hexEncode to toHex
2015-05-28 09:00:13 -05:00
c8145434c3
Add crypto.hexEncode and crypto.mask
2015-05-28 07:47:09 -05:00
ca78b9ea2c
Add crypto module initially containing sha1 and base64_encode.
2015-05-28 07:46:57 -05:00
c29edf7a22
app/modules/ws2812.c: re-add ws2812.write()
...
Add the original ws2812.write() function which does not scramble the
buffer while preserving the 'new' ws2812.writergb.
With this everybody should be happy again
2015-05-26 23:12:38 +02:00
f7a6183853
Merge pull request #437 from dnc40085/dev096_adc.vdd33_fix
...
Added fix to adc.readvdd33() to prevent crashing in station mode
2015-05-24 07:23:16 +08:00
2d0689142c
Merge pull request #438 from dnc40085/dev096_wifi.getchannel
...
added wifi.getchannel
2015-05-24 07:23:07 +08:00
6477f5f389
added wifi.getchannel
2015-05-22 19:42:21 -07:00
dd00e31027
Added fix to adc.readvdd33() to prevent crashing in station mode while
...
connected
2015-05-22 18:01:05 -07:00
5261fb1948
Update spiffs to latest.
2015-05-21 15:18:35 +08:00
c66cced7f4
Merge branch 'dev096' of https://github.com/nodemcu/nodemcu-firmware
2015-05-21 10:59:30 +08:00
8887085ef8
Revert file.format method.
2015-05-21 10:58:58 +08:00
c82cc3f7c5
Testing use all modules.
2015-05-21 10:42:28 +08:00
a1e67c5cf0
Try to use latest spiffs but not success.
2015-05-21 10:39:02 +08:00
7244d51b38
Fixed bug in wifi_scan_done
2015-05-20 02:21:46 -07:00
fc8fa2cc91
Fixed readvdd33 bug.
2015-05-19 20:11:15 +08:00
0f3ade36d8
Merge branch 'dev' of https://github.com/nodemcu/nodemcu-firmware
...
Conflicts:
app/modules/net.c
2015-05-19 20:06:03 +08:00
546bca00c1
changed wifi_setip() to allow setting SoftAP gateway to 0.0.0.0
2015-05-17 19:29:26 -07:00
70580dc4ae
added net.dns.setdnsserver('ip',[index]), net.dns.getdnsserver([index]), net.dns.resolve('domain.com', function cb('ip' or nil if fail) )
...
modified: app/modules/net.c
2015-05-16 20:53:31 -04:00
61f65fb02a
Merge pull request #420 from devsaurus/dev
...
Add missing functions for u8g
2015-05-16 20:26:50 +08:00
5b588b7bd3
implement getStrWidth() and setFontLineSpacingFactor()
2015-05-15 21:32:28 +02:00
de56cb084e
sort member functions
2015-05-15 21:13:59 +02:00
71469dd70f
Merge branch 'dev' of https://github.com/nodemcu/nodemcu-firmware
...
Conflicts:
app/include/user_version.h
app/modules/node.c
app/modules/wifi.c
2015-05-15 08:13:46 +08:00
43d06459a6
Merge pull request #409 from dnc40085/dev096-wifi_scan_done
...
Change format of table that is output by wifi_scan_done function
2015-05-15 07:54:48 +08:00
60e1e8ba7d
Merge pull request #408 from dnc40085/dev096-wifi.ap.config
...
Additions and changes to wifi module
2015-05-15 07:54:42 +08:00
55cff23f64
Merge pull request #405 from dnc40085/dev096-wifi.setmac_fix
...
Fix for inability to use standard formatted MAC address with wifi.setmac()
2015-05-15 07:54:34 +08:00
d30fea9bd0
Merge pull request #413 from dnc40085/dev096-tmr.alarm_memory_leak_fix
...
Fix for issue #382
2015-05-15 07:49:49 +08:00
a5d96f4719
Merge pull request #404 from dnc40085/dev096-wifi.sta.getconfig
...
Add function wifi.sta.getconfig() and more parameters to wifi.sta.config()
2015-05-15 07:45:56 +08:00
4c2ad0f545
Add -Os flag to release and debug builds
...
To fit the build on boards with 512K of flash, build using -Os flag.
2015-05-14 11:27:43 -04:00
894fcc4799
minor change
2015-05-14 04:59:55 -07:00
4f097cf063
Fixed memory leak in tmr.alarm()
2015-05-14 04:40:57 -07:00
cf32376467
Minor change to wifi.sta.getap()
2015-05-11 21:02:46 -07:00
e9081a81a5
Remove conflict
2015-05-11 20:03:02 -07:00
3941977550
Removed commented lines from previous commit
2015-05-11 18:45:27 -07:00
78cb215bb2
Changed output format of table that is output by wifi_scan_done
2015-05-11 18:26:16 -07:00
f31671044d
Fixed error in wifi_station_listap
2015-05-11 17:59:51 -07:00
aca2b7724b
Added description to wifi_station_listap
2015-05-11 05:38:23 -07:00
cf54f85549
Added ability to set scan configuration to wifi.sta.getap
2015-05-11 05:12:34 -07:00
5b375cfe50
Copied changes from dev branch, commit f13c5c6 from Wayne Bartnick
...
wifi.sta.config (wifi_station_config):
- range checking password length (8~64)
wifi.ap.config (wifi_ap_config):
- range checking ssid length (1~32)
- range checking pwd length (8~64)
- new params:
- auth: wifi.OPEN, wifi.WPA_PSK, wifi.WPA2_PSK, wifi.WPA_WPA2_PSK
- default WITH pwd: wifi.WPA_WPA2_PSK
- default WITHOUT pwd: wifi.OPEN
- channel: 1~13 (default: 6)
- hidden: 0/1 (default: 0)
- max: 1~4 (default: 4)
- beacon: 100~60000ms (default: 100)
wifi.ap.getclient (wifi_ap_listclient):
- returns table(mac,ip) of all connected clients
wifi.ap.dhcp:
- new submodule
- config (wifi_ap_dhcp_config), returns start/end ips
- params:
- start (e.g., "192.168.1.100")
- end ip calculated from wifi.ap.config.max
- start (wifi_ap_dhcp_start), returns boolean
- stop (wifi_ap_dhcp_stop), returns boolean
2015-05-11 05:06:48 -07:00
c6c8bd84a0
minor change to wifi.sta.config()
2015-05-11 00:05:28 -07:00
7533a6afba
Fix for inability to use standard formatted MAC address with
...
wifi.setmac() also changed wifi.getmac() to use macro
2015-05-09 04:29:18 -07:00
f9e0e0cc61
Added examples to description of wifi.sta.config()
2015-05-09 04:17:35 -07:00
e667b2029d
Added function wifi.sta.getconfig()
...
Added more parameters to wifi.sta.config()
2015-05-09 01:50:35 -07:00
bc7b9f86c4
Allow connecting to unsecured WiFi networks
2015-05-07 15:12:57 +02:00
700ba55d26
Fix for memory leak in function wifi.sta.getap()
2015-05-07 05:02:59 -07:00
749e71d9cb
Fixed strange SPI flash API error. Added word_of_aligned_array.
2015-05-05 23:59:30 +08:00
32e9ac204a
Fix PWM init bug, set all initial duty to 0.
2015-05-01 18:35:30 +08:00
1923280572
Merge pull request #365 from nodemcu/master
...
Add ICMP ping to net module
2015-05-01 14:57:50 +08:00
f4a9de4886
Added comments for setphymode and getphymode functions in wifi module
...
Added constants PHYMODE_B, PHYMODE_G, PHYMODE_N to wifi module
2015-04-29 00:06:06 -07:00
900c43d520
Add setphymode and getphymode to wifi module
2015-04-26 20:03:44 -07:00
f68d41608e
Add multicastJoin and multicastLeave to net module
...
net.multicastJoin(if_ip, multicast_ip)
net.multicastLeave(if_ip, multicast_ip)
if_ip is a string containing the interface ip to join/leave the
multicast group. multicast_ip is the multicast ip of the group to
join/leave. if_ip can be "" or "any" to affect all interfaces.
2015-04-15 03:41:13 -05:00
81d9f8893a
fix #353
2015-04-12 23:34:11 +08:00
f19e24c7ac
Update tmr.c
...
According to NodeMCU team recommendations.
2015-04-10 14:56:17 +05:00
e61ad9d7ba
Merge pull request #339 from wladurner/issue_321
...
fixes issue #321 "ws2812.writergb scrambles buffer" reported by makefu.
2015-04-06 21:26:04 +08:00
68607e3d2e
Merge pull request #334 from model101/buf1kdev
...
LUAL_BUFFERSIZE back to 1K and warning notice added
2015-04-06 00:01:12 +08:00
a333d6a9b9
Merge pull request #333 from wbartnick/dev
...
wifi submodule enhancements, thanks to @wbartnick
2015-04-05 23:09:33 +08:00
06193090e6
LUAL_BUFFERSIZE back to 1K and warning notice added
2015-04-05 16:14:52 +02:00
ff85cf4371
fixes issue #321 "ws2812.writergb scrambles buffer" reported by makefu.
...
Don't modify Lua-internal lstring - use a copy instead.
2015-04-05 15:49:32 +02:00
f13c5c61e6
wifi.sta.config (wifi_station_config):
...
- range checking password length (8~64)
wifi.ap.config (wifi_ap_config):
- range checking ssid length (1~32)
- range checking pwd length (8~64)
- new params:
- auth: wifi.OPEN, wifi.WPA_PSK, wifi.WPA2_PSK, wifi.WPA_WPA2_PSK
- default WITH pwd: wifi.WPA_WPA2_PSK
- default WITHOUT pwd: wifi.OPEN
- channel: 1~13 (default: 6)
- hidden: 0/1 (default: 0)
- max: 1~4 (default: 4)
- beacon: 100~60000ms (default: 100)
wifi.ap.getclient (wifi_ap_listclient):
- returns table(mac,ip) of all connected clients
wifi.ap.dhcp:
- new submodule
- config (wifi_ap_dhcp_config), returns start/end ips
- params:
- start (e.g., "192.168.1.100")
- end ip calculated from wifi.ap.config.max
- start (wifi_ap_dhcp_start), returns boolean
- stop (wifi_ap_dhcp_stop), returns boolean
2015-04-05 09:21:16 -04:00
bcbde08bf7
fix mqtt keepalive ping, add a example for mqtt in lua_examples.
2015-04-05 02:22:51 +08:00
8558641190
add gpio.serout() api to help serialize bit out
2015-04-03 16:05:14 +08:00
1c2ee75a00
fix mqtt, do a format when wrong flash size is detected
2015-04-03 00:51:02 +08:00
32e062f523
polish mqtt module
2015-03-31 23:38:28 +08:00
dcb6e53af7
add auto-reconnect option to mqtt:connect api
2015-03-31 00:36:44 +08:00
09750b5653
add queue to mqtt module
2015-03-30 00:24:09 +08:00
3dd1ac3739
Move node.readvdd33 to adc.readvdd33, fix #162 .
2015-03-27 00:52:55 +08:00
e1f8b604a0
fix init_data detect flash api
2015-03-24 23:21:40 +08:00
52ca40b8ea
add init.lua examples
2015-03-22 21:09:37 +08:00
d5731dd9bd
merge from dev
2015-03-20 20:15:38 +08:00
4332b21ef3
minor fix
2015-03-20 19:42:10 +08:00
1562215905
Merge pull request #301 from devsaurus/dev
...
Use correct function for stop in U8G_COM_MSG_WRITE_BYTE
2015-03-19 12:17:11 +08:00
2d254bd47c
use correct function for stop in U8G_COM_MSG_WRITE_BYTE
2015-03-18 22:33:16 +01:00
3d14530b80
fix cjson.encode() when in integer version
2015-03-18 19:37:47 +08:00
3aead6d230
try to fix cjson.encode in integer only version
2015-03-18 17:01:01 +08:00
a70709268b
merge cjson and dev to master, make a stable release
2015-03-18 14:22:17 +08:00
a01bda03dd
Merge pull request #294 from nodemcu/json
...
Json branch merged to master
2015-03-18 13:11:11 +08:00
09b650be41
disable untested pcd8544 driver for the moment
2015-03-17 20:52:47 +01:00
87598c5dfe
Merge remote-tracking branch 'upstream/dev' into dev
2015-03-17 20:35:39 +01:00
808a359eb8
quick fix when wide charactor issue
2015-03-17 22:42:22 +08:00
b648e9a8db
Added node.setcpufreq(mhz) function.
...
This function allows setting the CPU frequency to node.CPU80MHZ or
node.CPU160MHZ.
2015-03-17 10:23:45 +01:00
45e7f270cc
Merge branch 'dev' into json
2015-03-17 00:13:15 +08:00
4d3c1a930f
code clean up for cjson
2015-03-17 00:12:25 +08:00
54004a4beb
fix cjson bugs and reduce mem usage
2015-03-16 23:59:57 +08:00
c0d690ce7e
under development
2015-03-16 17:11:48 +08:00
d425dd7127
under develop
2015-03-16 17:09:43 +08:00
83f53c23c1
json port from cjson. not work yet, add cjson folder
2015-03-16 09:19:06 +08:00
c9912f1d82
json port from cjson. not work yet, delete folder
2015-03-16 09:17:21 +08:00
9c0c960e84
json port from cjson. not work yet
2015-03-16 09:00:33 +08:00
4d5242e1b7
Merge pull request #284 from nodemcu/dev
...
Sync from dev to dev096.
2015-03-16 05:44:51 +08:00
5c84359b5c
ROM flash size can changed with detected size, fixed #283 .
2015-03-16 05:40:43 +08:00
3124bcf357
Merge remote-tracking branch 'upstream/dev' into dev
2015-03-15 22:06:30 +01:00
f7eed2b53b
Changed e9 to magic_e9.
2015-03-16 01:44:54 +08:00
0b01f28c62
Merge branch 'dev' of https://github.com/nodemcu/nodemcu-firmware
...
Conflicts:
app/include/user_modules.h
app/include/user_version.h
2015-03-16 01:13:03 +08:00
4e7473bc00
Fixed flash automatic detection bug. Support 128MBit flash.
2015-03-16 01:05:06 +08:00
dfce182622
Paste new version, make it can get correct flash size.
2015-03-16 00:51:47 +08:00
ed87cbd96f
Try to fix flash auto detection bug.
2015-03-16 00:48:28 +08:00
0b95ae08a2
default build with coap, reduce coap module mem usage
2015-03-15 20:12:29 +08:00
e3c31d0629
Merge pull request #280 from nodemcu/master
...
Merge master to dev096.
2015-03-15 20:04:55 +08:00
394cced84b
fix #273
2015-03-15 16:06:35 +08:00
f510e658d5
merge master solve conflicts
2015-03-15 15:01:07 +08:00
c46000069d
reduce coap module memory usage
2015-03-15 13:44:50 +08:00
0a4049767a
Fix getFSF to abide by the function contract
2015-03-14 09:00:25 -07:00
3b37f0920c
res optional
2015-03-13 22:22:57 +01:00
429bf57d67
add pcd8544
2015-03-12 23:09:41 +01:00
b387ba93ec
introduce u8g_config.h
2015-03-12 21:50:57 +01:00
7b160da1a3
Merge remote-tracking branch 'upstream/dev' into dev
2015-03-12 21:16:39 +01:00
8638863ac8
update readme
2015-03-12 14:20:40 +08:00
9f006acd8a
update readme
2015-03-12 14:05:47 +08:00
4f55ee4e34
validate SPI comm interface with ssd1306_128x64_spi
2015-03-11 21:53:45 +01:00
d28a2c9eda
add interger version release, fix #234 , #252 , #246
2015-03-11 13:21:19 +08:00
24411d34c1
fix tmr.time()
2015-03-11 08:59:00 +08:00
27c0620912
fix bugs for spiffs from pellepl/spiffs
2015-03-10 23:07:47 +08:00
81ea8d9597
add math, add file.fsinfo(), update spiffs.
2015-03-10 01:12:36 +08:00
76a499313f
Merge remote-tracking branch 'upstream/dev' into dev
2015-03-07 21:54:37 +01:00
8369f74bd0
comment out math.fmod to reduce code size
2015-03-06 17:00:37 +08:00
9d0c733073
Merge branch 'dev' into dev096
2015-03-06 16:46:37 +08:00
45f6abd448
merge coap
2015-03-06 16:24:55 +08:00
13b08cdacf
add macro to control built-in lib for lua, add libm.a
2015-03-06 15:55:24 +08:00
6ea3d6390c
Merge branch 'dev' of https://github.com/nodemcu/nodemcu-firmware
...
Conflicts:
app/include/user_config.h
ld/eagle.app.v6.ld
2015-03-06 14:02:58 +08:00
bbef457e50
seperate user_config.h to speed-up compile when modules disabled/enabled
2015-03-06 11:59:04 +08:00
315d1a1696
Merge remote-tracking branch 'upstream/dev' into dev
2015-03-04 22:18:26 +01:00
ab1eb0b93b
Accidentally removed ROM_MODULES_U8G
...
I am sorry, I made an error in my last pull request and accidentally
removed ROM_MODULES_U8G. Here is it back again.
2015-03-03 20:51:16 +01:00
484dbf2683
Changed the ws2812 byte order from GRB to RGB
...
There seems to be interest in using the more intuitive RGB byte order to
specify the LED color. Also fixed the documentation.
2015-03-03 14:51:49 +01:00
8432e8c8be
Changed the ws2812 byte order from GRB to RGB
...
There seems to be interest in using the more intuitive RGB byte order to
specify the LED color. Also fixed the documentation.
2015-03-03 10:20:02 +01:00
5f1d324059
remove caching
2015-03-01 23:45:25 +01:00
32774d428c
handle font data as light userdata
2015-03-01 23:11:24 +01:00
7ae293d566
set free'd pointer to NULL
2015-02-25 23:17:08 +01:00
c869eddb8a
Update file.c
...
Made file.seek() return nil on error / EOF, as specified in documentation, instead of returning true.
2015-02-25 14:34:07 -05:00
7c820b4e8f
Update header of flash binary definition.
2015-02-25 23:08:08 +08:00
2cfb86b5b5
improve device and page buffer initialization
2015-02-20 21:15:38 +01:00
e3ed4fc0da
fix typo
2015-02-20 18:24:53 +01:00
6c0adbf980
SPI comm function, untested
2015-02-20 11:07:52 +01:00
81be529d68
preparation for adding more display devices: allocate and construct page buffer
...
dynamically to save heap for unused device types
2015-02-19 16:47:41 +01:00
8e42631a81
implement drawBitmap
2015-02-19 12:12:14 +01:00
a287020096
implement drawXBM
2015-02-18 23:57:34 +01:00
37d2c9f6c1
Revert and remove EGC in user_config.h
2015-02-17 23:44:05 +08:00
c05fc843f4
Enable EGC.
2015-02-17 02:25:05 +08:00
cb9828e357
Add newline at the file end of dummy.c
2015-02-16 22:14:37 +08:00
bb0a5b1d7c
Re enabled open-source LWIP using dummy.c
...
Fixed the RAM issue.
2015-02-16 21:50:08 +08:00
4fd11fdfa9
Merge remote-tracking branch 'upstream/dev' into dev
2015-02-16 14:37:53 +01:00
86f0a7307f
Roll back system_get_vdd33 to readvdd33.
...
Bug not fixed in this version =(
2015-02-16 13:08:37 +08:00
05fe3ea9f1
Update to SDK 0.9.6_b1
...
The open source LWIP is broken, use espressif's liblwip.a.
Uses system_get_vdd33 instead of readvdd33.
The espressif's sdk0.9.6 beta1 (2015.02.15) release note
1、Optimize smartconfig to version v0.8；
2、Optimize AT to version 0.22.b1；
1>、Fixed bugs；
2>、Optimize the speed of transparent transmission；
3、Optimize boot to version 1.3(b3)；
1>、Fix compatibility problem of dual flash ；
4、Solve problem of the large current in deep sleep；
5、Fixed problem “check mem fail”；
6、Fixed problem of UDP socket may stop listening broadcast packet after a long time running under some special router；
7、Fixed bug related to wifi_station_scan;
8、Other optimize to make the software more reliable；
2015-02-16 11:37:39 +08:00
378398d41d
Merge branch 'dev' of https://github.com/nodemcu/nodemcu-firmware
2015-02-15 02:14:53 +08:00
0232c13b83
Emergency update, fix flash size auto detection bug.
...
64Mbit and 128Mbit supported by hardware, but not supported by this SDK 0.9.5. Waiting SDK update.
2015-02-15 02:13:58 +08:00
f6b1d3a399
Test what caused flash AUTO_SIZE bug.
2015-02-15 00:02:53 +08:00
1798c6b78c
minor update
2015-02-14 16:59:45 +08:00
05997cb477
remove superfluous files
2015-02-13 22:01:52 +01:00
655b06b48e
Merge remote-tracking branch 'upstream/dev' into dev
2015-02-13 21:59:34 +01:00
2c5c00a56a
add net.socket:getpeer() api, returns peer ip,port
2015-02-14 02:38:15 +08:00
fab1f9560a
revert LUA_BUFFERSIZE to 1024
2015-02-14 02:17:27 +08:00
Nick Andrew
TerryE
Johny Mattsson
Johny Mattsson
btsimonh
devsaurus
Marcel Stör
Ivan Lopez
Robert Foss
Łukasz Oleś
Vowstar
Thomas Soëte
Antoine
dnc40085
Jens Jensen
dnc40085
kvakanet
Jonathan karras
chris
aeprox
Jonathan Karras
Jakub
Konrad Beckmann
Bernd Meyer
zeroday
vowstar
Luna
Mike Wen
Johny Mattsson
MarsTechHAN
Orgmar
cal
=
makefu
Jorge Mesquita
trilader
Kevin Uhlir
Kirill
cal
Wolfram Ladurner
Wayne Bartnick
funshine
Markus Gritsch
Erant
Ezekiel-DA