fdc8618900
Cardbox: point to the right picture in description
2022-01-02 11:08:49 +01:00
9a98a50506
DrillBox: Move to Tray group
2021-12-15 14:18:17 +01:00
bfe39861fa
DrillBox: Make layers adjustable
...
Now one can have any number of layers at any height. This may make the
generator useful for other application with custom hole patters on
different height. It also allows deleteing holes for short drills on the
lower layers.
Thanks to https://github.com/KittyDreadful for suggesting this!
Related: #339
2021-12-15 14:18:17 +01:00
9b0ebad0e7
DrillBox: Make bottom edge configurable
2021-12-15 14:18:17 +01:00
68e0bae6a9
DrillBox: Set finger joint details as defaults
...
instead of hard coding them
2021-12-15 14:18:17 +01:00
866714ef7e
Fix Typo
2021-12-14 22:20:56 +01:00
b11f9b0f1a
BinTray: Fix finger holes in side walls
...
Pattern was mirrored before.
Resolves : #348
Thanks to https://github.com/Al0rin for reporting!
2021-12-04 18:52:31 +01:00
ee2baab396
flangedWall: Allow other edge types
...
for sides without flange. Support "e" edges for sides with flanges
(along with "E" and "F")
Resolves : #347
2021-12-04 16:02:25 +01:00
ad1be4c361
Fix placement of rectangularTriangle(s)
...
That was broken by fcefddca1eResolves : #346
Thanks to Guillaume Collic for reporting!
2021-12-01 23:37:02 +01:00
8b791b32b6
TypeTray: Use h edge for sides if back_height is set
...
Better support pulling forces if tray is screwed to a wall.
2021-11-17 17:58:13 +01:00
a0f8fdd975
TypeTray: Fix front when back_height is set
...
Side edges did not fit into side walls.
Resolves : #336
Thanks to https://github.com/RestlessRabbits for reporting!
2021-11-17 17:58:13 +01:00
4319b704dd
DrillBox: Fix holes diameter
...
by removing radius vs diameter mixup
Resolves : #338
Thanks to https://github.com/KittyDreadful for reporting!
2021-11-08 14:06:24 +01:00
62b30e3d88
fix some typos with codespell
2021-11-03 15:34:38 +01:00
40e56bf26f
TypeTray: Add back_height parameter
...
to allow mounting space similar to SlatwallTypeTray
2021-10-30 22:01:36 +02:00
c3faa8f5a8
Folder: Add settings tab for flex
...
Remove unused Fingerjoint Settings
2021-10-24 23:19:17 +02:00
fce7e08a1a
Adjust line width in transform()
...
Pass scale param down the transform call tree.
This fixes the inner corners for the PS output which were seen as "too
big" when comparing with the wrong line width.
Resolves : #332
2021-10-09 13:59:24 +02:00
cbbe8c11cc
Shutterbox: More pictures
...
Thanks to Taylor Williams (https://github.com/tzwilliams )!
2021-09-26 17:33:29 +02:00
d6c8d965c3
RoundedBox: More pictures
...
Thanks to Taylor Williams (https://github.com/tzwilliams )!
2021-09-26 17:04:18 +02:00
a2678de3e2
SilverwareBox: Fix edge of surrounding wall
...
and remove bogus arc holes at the corners
2021-09-21 23:02:47 +02:00
f6fa4967ab
surroundingWall: Fix size calculation
...
Resolves : #297
2021-09-21 23:01:53 +02:00
fcefddca1e
rectangularTriangle: Improve spacing
2021-09-21 22:52:10 +02:00
aad270e67e
The Royal Game of Ur Images
2021-09-19 20:37:29 +02:00
eb84f0e0ac
rectangularTriangle: Fix placement
...
Resolves : #308
2021-09-19 16:52:29 +02:00
8030faadd6
rectangularTriangle: Fix outset edges in hypothenuse
2021-09-19 16:50:39 +02:00
cd604f0d53
CardBox: Fix height
...
Previously box was one thickness to low as the height of the lid was not
accounted for.
Thanks to hd (https://hackaday.io/hacker/1210037-hd ) for pointing this
out!
2021-09-03 13:59:11 +02:00
44cf852fac
Openbox: Add edgetype parameter
2021-07-18 15:37:04 +02:00
064cd71cd5
OpenBox: Remove unused bedbolt parameters
2021-07-18 15:37:04 +02:00
2154245cde
AngledBox: Render surrounding walls in order
2021-06-27 16:24:01 +02:00
a35674a736
Add labels to Cardbox
...
Added labels to CardBox
Also rearange some parts to make labels easier to read
2021-06-27 16:07:58 +02:00
c0eca5ea5f
Add labels to boxes
...
Added labels to AngledBox, BasedBox, ClosedBox, Console2, DinRailBox,
DisplayCase and ElectronicsBox
2021-06-27 16:07:58 +02:00
6238903237
Gears: Use proper metric module
...
with diameter / #teeth instead of circumference / #teeth.
Thanks to nialabert (https://github.com/nialabert ) for pointing this
out!
Resolves : #260
2021-06-26 10:58:25 +02:00
9cb038ef0a
Quote cli in meta data to not contain line breaks
...
Resolves : #327
2021-06-25 22:13:13 +02:00
3ff0df504b
DoubleFlexDoorBox: Add picture
...
and move out of Unstable.
Thanks to Targor (https://github.com/targor ) for the idea and image
Resolves : #322
2021-06-13 09:23:37 +02:00
2538f2fef3
Add optional "finger hold" to the sliding lid, present if "hole_width" > 0.
...
Also:
* add comments for the sliding lid parameters
* move groove-cutting logic to helper methods
Example usage:
scripts/boxes UniversalBox --bottom_edge=F --top_edge=L --Lid_spring=none --Lid_style=springs --x=100.0 --y=100.0 --h=100.0 --reference=0 --thickness=3.0 --Lid_hole_width=20
2021-06-12 11:46:37 +02:00
4df9c4aae9
Add labels to Ottobody
...
Using the label interface, render identifying labels on the Ottobody
2021-06-11 22:29:59 +02:00
2d262dacdd
Allow labeling of parts
...
Add a parameter label to rectangularWall(), flangedWall(),
rectangularTriangle(), trapezoidWall(), trapezoidSideWall() that is rendered
in red to identify parts, it is not ment to be cut or etched.
Added --labels flag to enable/disable rendering of labels.
Resolves : #316
2021-06-11 22:29:23 +02:00
ef94daa006
Add mouseover images for most groups
...
Resolves : #253
2021-06-05 18:25:53 +02:00
9a46882c8f
Add color selection to all holes
...
All methods that uses the holeCol decorator now take a parameter color.
Added semantic symbols for colors.
2021-06-03 21:40:11 +02:00
c86ae75712
Parametrizise the drillbox
2021-06-03 21:40:11 +02:00
22a50a6181
PhoneHolder: Fix edge of second side being reversed
...
The code switched sides for each edges draen reversed. Change that to
only reverse local variables and leave the edge objects unchanged.
Thanks to https://github.com/ChrisLaserman for reporting!
Resolves : #324
2021-05-31 17:04:17 +02:00
b344229c95
Add metadata to PostScript output
...
as title, creator and further comments.
Unfortunately pstoedit does drop these when converting to other
formats. A pity.
2021-05-29 10:55:36 +02:00
be7115007d
SlatwallPinRow: Make it actually work
...
Remove finger joints from pinplate as there are not matching holes.
Move finger holes on back plate to right place.
2021-05-24 22:16:59 +02:00
bdcad5ee27
New generator: SlattwallStairs
...
Renders a stair like structure that can house tools like screw drivers
if the proper holes or slots are added.
2021-05-23 13:00:52 +02:00
538d5af99b
New generator: DoubleFlexDoorBox
...
Still untested and missing a sample image
2021-05-22 14:10:16 +02:00
b0861bf937
Add platonic solid generator
...
Resolves : #254
2021-05-16 15:07:53 +02:00
3a979bcfc6
Extend PaintStorage to make stackable drawers
...
Add an extra argument --drawer that changes it to a simple drawer
Co-authored-by: Florian Festi<florian@festi.info>
Resolves : #315
2021-05-16 14:58:18 +02:00
eec53625f7
New generator: SlatwalPinRow
...
Angled pins to hang stuff from.
Still untested.
2021-05-15 15:45:44 +02:00
072ff9b032
New generator: DrillStand
...
A stand-alone (no pun intended) version of the SlatwallDrillBox
2021-05-15 15:45:25 +02:00
bdca0f1422
New StackableFeet edge without finger holes
...
first use of non ASCII edge char - what can you do...
2021-05-15 15:45:25 +02:00
d478edd5d7
Add coffee capsule holder generator
2021-04-25 11:25:30 +02:00
b132569219
SlatWallSettings: Add hook_depth setting to fit into other slot styles
...
Some are not as deep as the ones this was originally created for
2021-04-18 18:27:44 +02:00
29183ed7ed
SlatWalls: Make pitch of the wall adjustable
...
Resolves : #312
2021-04-17 11:44:47 +02:00
41165731c9
DisplayShelf: Fix calculations for negative angle values
2021-04-02 16:11:11 +02:00
97d85ff10e
Add PhoneHolder
2021-03-22 22:45:55 +01:00
3a3304de67
mention similar ones in burn test
2021-03-22 19:45:06 +01:00
69bf15a682
serraded -> serrated typo
2021-03-22 19:41:33 +01:00
9bdd5e4dda
mentioned ClosedBox and BasedBox in each other descriptions
2021-03-20 21:26:54 +01:00
23ee7b3eb2
copy closedbox description to basedbox description as applicable
2021-03-20 21:26:54 +01:00
000ba92106
fix typo in description
2021-03-20 21:26:54 +01:00
e8fc07d33d
increase play in two piece to 0.15
...
note: I am very inexperienced, this is based on a single test (with 0.05 and 0.15 box) and advice from local expert
both apply to plywood
2021-03-17 15:24:46 +01:00
7355d0d612
TrayLayout: Give more descriptive parse errors
...
Also allow both X and now also x for removed floor
2021-03-15 13:50:35 +01:00
7397e49b2b
TrayLayout: Add description text
...
Resolves : #295
2021-03-15 13:50:35 +01:00
21ca3d0b98
try to add explanation how burn test works
...
fixes #288
2021-03-02 14:12:42 +01:00
3efd941ff1
Keyboard: 19.05 mm spacing is more standard than 19
2021-02-27 21:02:07 +01:00
72c7fca53e
Keyboard: clean and column callback spacing default value
2021-02-27 21:02:07 +01:00
61b85a6aed
Keyboard: add shared settings with new options
2021-02-27 21:02:07 +01:00
0c89ad2b17
Keyboard: fix alignment in atreus21 and keypad
2021-02-27 21:02:07 +01:00
0d4d4f308b
Keyboard: move common code to mixin (atreus21, keypad)
2021-02-27 21:02:07 +01:00
ec8abee265
Atreus21: clean dead code and magic numbers
2021-02-27 21:02:07 +01:00
44a9041427
attempt to make burn test description more newbieproof
...
fixes #284
2021-02-27 20:56:03 +01:00
33917a6113
fix typo
2021-02-24 21:03:52 +01:00
d694bd3241
Fix DividerTray length with 'outside=false'
2021-02-14 10:20:16 +01:00
9642b9aacc
Add PaperBox
2021-01-28 13:59:47 +01:00
eea27ee74d
Implementation of FlexSettings
...
Addding of FlexSettings to RoundedBox to adjust the flexibility setting for the corners
2020-12-29 22:29:27 +01:00
e6dccc4135
StorageRack: Add pictures
...
Thanks to https://github.com/impellerturn for providing the images!
2020-12-29 15:33:27 +01:00
34260e1b01
Castle: Actually add description
2020-12-29 15:18:37 +01:00
8613c64b32
Also scale line width
...
This in practise only affects PostScript and derived formats - basically
everything except SVG
2020-11-19 23:23:39 +01:00
b41a3114ca
AgricolaInsert: better thickness range support
2020-11-16 22:46:43 +01:00
632a96676a
Fix typo in RoundedTriangleFingerHolesEdge
2020-11-11 00:35:22 +01:00
7afe0329a2
MakitaPowerSupply: Dynamically calculate vent holes
2020-11-10 18:00:40 +01:00
043f208213
AllEdges: Fix for new backend
2020-11-09 19:15:55 +01:00
09b4de82de
MakitaPowerSuppy: Replace hyphens parameter names
2020-11-09 19:15:55 +01:00
47d3600016
Add RoundedTriangleFingerHolesEdge (T)
2020-11-09 19:15:55 +01:00
e5f88eda4c
Fix typo
2020-11-09 19:15:48 +01:00
cdc89e3cde
SilverwareBox: Add missing stroke() command
2020-10-20 17:00:15 +02:00
2d64dcccdf
Fix Context.curve_to
...
Didn't move to the end point properly in the new backend.
2020-10-20 17:00:15 +02:00
90c783568f
OttoBody: Fix issue with HexHoles that broke the generator
...
Thanks to https://github.com/ottobot42 for reporting.
Resolves : #250
2020-10-19 21:00:38 +02:00
adc3ec5210
Fix polygonWalls()
...
Not calling .stroke() now creates a error with the new backend.
Thanks to Michel27290 (https://hackaday.io/hacker/1123712 ) for reporting!
2020-10-16 11:38:30 +02:00
dabab1880f
SpicesRack: Fix feet to support first level
2020-10-13 22:49:19 +02:00
1dd567657e
Fix use of roundedPlate in Display and LaserClamp
...
Thanks to Guillaume Collic (https://github.com/gcollic ) for reporting!
Resolves : #248
2020-10-13 20:00:09 +02:00
6dff8db710
Add alignment pins to BayonetBox
...
Also add a lower ring to the bayonet lid of the RegularBox limiting rotation
2020-10-13 16:07:31 +02:00
f74e86c38f
BasedBox: Add description and point people to edge_width
2020-10-11 14:01:03 +02:00
dfc2f075d9
Adding Grooved Edge (z, Z), example use in UnevenHeightBox
2020-09-29 20:40:18 +02:00
2a55183e50
AgricolaInsert: optimize player box generation layout
2020-09-20 12:37:29 +02:00
9e83c2ad9b
Add AgricolaInsert box
2020-09-20 12:37:29 +02:00
7495de72f7
DividerTray: refactor, and makes it easier to reuse
2020-09-20 12:37:29 +02:00
eba63d9acb
Add option to do rectangular holes without centering them
2020-09-20 12:37:29 +02:00
7fd4306664
Add h edge to top_edge parameter
...
Resolves : #244
2020-09-19 22:39:30 +02:00
e35447e536
Fix FlexEdge to use separate path for the flex cut
...
to allow continous outlines for parts.
Resolves : #242
2020-09-15 17:44:58 +02:00
3513cf88a8
Fix code closing paths to look at each section separately
2020-09-15 17:44:58 +02:00
f058ce68fb
Add --lid_height in UnevenHeightBox
2020-08-28 10:35:10 +02:00
812b3ad59a
regularPolygonWall: Fix size calculation
2020-08-16 15:02:56 +02:00
d34d6ed987
fixed proper use of settings in paintbox.py
2020-08-15 09:47:40 +02:00
f6e2773810
fixed bug where the option hexpattern=True would cause an error.
2020-08-14 12:30:21 +02:00
676772ee64
Clarify rectangularHole x,y parameters (center)
2020-08-13 00:38:54 +02:00
a0c04d10ca
Add description to ClickSettings
2020-08-04 23:42:12 +02:00
0980270dcf
RectangularWall: Fix list of available edge types
...
M -> N
2020-08-04 23:41:08 +02:00
d3fa5ec0d4
UniversalBox: Add vertical_edges parameter
...
to allow finger hole joints for more stability
Fixes: whining by wu
2020-08-04 21:52:25 +02:00
efe87c3e2e
TwoPiece: Add hi parameter to allow for lower inner wall
2020-08-04 19:33:11 +02:00
bdc6a4c110
Add screwholes param to Boxes.NEMA()
2020-08-04 19:33:11 +02:00
9bbca5419f
New generator: NemaPattern
2020-08-04 19:33:11 +02:00
4d2db03dc4
New generator: FanHole
2020-08-04 19:33:11 +02:00
59564a58a7
Only add "unless outside selected" if "outside" param is present
...
Void confusing users if outside param is missing but still be mentioned in
the help text.
2020-08-04 19:33:11 +02:00
b8432e93af
New generator HexHoles
2020-08-04 19:33:11 +02:00
e643e07b4d
Add HexHolesSettings class
...
to get rid of the settings tuple and to support changing them in the UI
Related: #33
2020-08-04 19:33:11 +02:00
415b133822
Add new Hole Patterns group
2020-08-04 19:33:10 +02:00
3dc5aa997c
Console: Fix for front_height == 0
...
Thanks to dougw (https://hackaday.io/hacker/885177-dougw ) for pointing
this out!
2020-07-23 16:19:56 +02:00
262d7804a4
Console and Console2: Add outside parameter
...
Also rename hi param to front_height in Console
2020-07-23 16:13:59 +02:00
402c04568e
DividerTray: Add Finger Joint Settings
...
Thanks to John Hildebrand https://hackaday.io/hacker/528106-john-hildebrand
for jointing out that they were missing!
2020-07-09 00:22:13 +02:00
02a7299618
Fix text alignment attributes
...
Was broken for "left"
Resolves : #228
2020-07-04 23:56:37 +02:00
2575cc39df
Add support for a bayonet mount lid to the RegularBox
...
Adjust BayonetBox to make the pieces usable from outside
2020-06-23 21:47:08 +02:00
604ea923af
New generator: BasedBox
2020-06-22 19:57:18 +02:00
ea0c9480e1
TriangleLamp: Fix hole position in front
2020-06-16 22:56:01 +02:00
cd884c63bf
AngledBox: Add bottom_edge parameter
...
Also fix bug with non matching finger joints between side walls and
miss alignment of the bottom and top pieces
2020-06-03 21:56:55 +02:00
ecaba08aa6
New generator: DinRailBox
2020-05-29 22:59:15 +02:00
c5a35bd3ec
CardBox: Fix typo
2020-05-27 17:27:23 +02:00
baf996764c
CardBox: Add building instructions
...
including a new picture of lid details by https://github.com/bwente
2020-05-26 18:07:17 +02:00
c065e154be
Generator for a split Atreus keyboard
2020-05-23 23:28:35 +02:00
6cd6e1826e
Close paths in SVG back end
2020-05-23 15:03:16 +02:00
07e53868f6
Remove duplicated "f" option in top_edge parameter
...
Thanks to Zhong for pointing this out!
2020-05-22 13:32:43 +02:00
c978266906
DividerTray: Fix bottom edge for middle walls
2020-05-22 10:25:55 +02:00
2fc59b48df
Remove reference to cairo
2020-05-18 22:30:28 +02:00
46b1e8684f
Add estimate for extents of text
...
Fix adjustment of SVG coordinates
2020-05-18 22:30:28 +02:00
95dc7f5731
Fix padding for SVG
2020-05-18 22:30:28 +02:00
39e2b0cfc3
Split all arcs > 100° into smaller pieces
...
This is necessary to make the approximation with Bezier curves work
2020-05-18 22:30:28 +02:00
3c94b4bf76
Don't try to draw arcs with an zero angle
...
Thanks to Bruno Ferrarese <https://github.com/bferrarese > for finding and
reporting this issue!
2020-05-18 22:30:28 +02:00
6440bcb639
Get text working for both SVG and PS
...
Move coordiate translation to to finish() method
Use Latin1 encoding for text PS in output
Add Boxes.set_font() to support basic font styles:
serif, sans-serif and monospaced
in normal, bold, italic and both bold and italic
2020-05-18 22:30:28 +02:00
492e7fb4dd
SVGSurface: Use horizontal and vertial lines
...
instead for just regular lines. This saves one number per point involved.
2020-05-18 22:30:28 +02:00
9e08691e15
Remove SVG and PS post processing code
...
Remove Extend class from svgutil
2020-05-18 22:30:28 +02:00
fddf78fcc3
Add metadata to the SVG files right away
2020-05-18 22:30:28 +02:00
0594ee703d
Replace svgwrite with xml.ElementTree
2020-05-18 22:30:28 +02:00
fd48e57f33
Implement new backend without cairo
...
by providing SVGSurface, PSSurface and Context classes
Disable post processing as we want to create proper files right away
2020-05-18 22:30:28 +02:00
da0e390789
do not start holes with the corner
2020-05-18 22:30:28 +02:00
89805b4804
New generator: SideDoorHousing
2020-05-12 21:54:59 +02:00
6091cf955f
Comsole2: Move to Box group in the UI
2020-05-10 16:13:54 +02:00
27264f8c08
New fingerHoleRectangle() function
2020-05-10 16:12:27 +02:00
928be1620b
UniversalBox: Change default for outset to True
...
for edge with hinge eye (i) top_edge
2020-05-05 22:03:20 +02:00
1f2d35082d
Console2: Properly name front_height parameter
2020-05-05 18:28:52 +02:00
0acc9c2a38
Console2: Move back wall latch down
...
to reduce chance of it conflicting with the front panel
2020-05-05 18:13:03 +02:00
05a7e02486
Console2: Images, descriptions and parameters for hatches
...
Add three new parameters: removable_backwall, removable_panel and glued_panel
that control which of the service hatches are present and how to attach
the front panel
2020-05-05 09:44:07 +02:00
93273f2fc7
Console2: Improve and fix latches
2020-05-02 18:42:36 +02:00
949c8d8324
Fix polygonWalls() for uneven number of walls and symetrical==True
...
For an uneven number of walls one needs to have two different edges
to be able to close the loop.
2020-05-02 00:43:33 +02:00
e2d716aeb8
Console2: Fix bottom edge for front and back
2020-05-01 23:49:05 +02:00
d45ccba307
New generator: Console2
2020-05-01 23:36:44 +02:00
966a6c77cf
Add "rotated" to possible move terms
2020-05-01 23:35:55 +02:00
54d4b6bebd
Console: Fix x, y confusion
2020-04-29 12:25:46 +02:00
279b60abc8
New generator: Console
2020-04-28 22:25:47 +02:00
9ea1d55a94
Add translate param
2020-04-20 16:30:33 +02:00
2f2256ec7d
Keypad support for CPG151101S11 hotplug sockets
2020-04-13 20:11:44 +02:00
c4ca1b4dfa
Also translate Edge descriptions in ArgparseEdgeType
2020-04-13 18:45:17 +02:00
f961cd533d
KeyPad: Improve parameter descriptions
2020-04-13 13:53:38 +02:00
195c68c28f
Rail holes dist ( #213 )
...
* added EurorackSkiff Generator
* fixed holes distribution
2020-03-05 23:09:03 +01:00
3a14e1796b
Generator for keypads with mechanical switches
2020-03-04 20:24:47 +01:00
0178a853c3
Add Inkscape style meta data to SVG output
2020-03-01 16:53:41 +01:00
80edaf5ac4
New generator: BottleStack
2020-02-29 18:19:59 +01:00
4c338e1c62
RoundedBox: Add edge_style parameter
2020-02-28 17:52:57 +01:00
22450a6fe7
roundedPlate: Fix placement
2020-02-28 17:52:49 +01:00
6476a51fc4
roundedPlate: Fix callback positioning
2020-02-28 17:52:49 +01:00
223ac26122
roundedPlate: new extend_corners param
2020-02-28 17:52:18 +01:00
26b33d62ff
roundedPlate: Properly lookup edge
2020-02-28 17:46:44 +01:00
7c004e2d2c
New primitive: Boxes.step()
...
Outset a line by a given margin - negative values for insetting
2020-02-28 17:46:44 +01:00
a0338a559f
Add a bottom to the divider tray.
...
This add support for the generation of a bottom for the divider tray.
The bottom can be generated by passing the --bottom=True flag.
This makes it possible to generate ./static/samples/DividerTray.jpg
2020-02-26 21:00:26 +01:00
eeb1baf352
Gear: don't allow less than 2 teeth
2020-02-01 15:30:53 +01:00
0394d418c1
dHole: Prevent division by zero
2020-02-01 15:30:18 +01:00
7943fa2390
flex2D: Fix division by zero for too small patterns
2020-02-01 15:22:35 +01:00
ec9d911142
DividerTray: Use ValueError instead of assert to treat this as wrong user input
2020-02-01 15:17:18 +01:00
069dd853aa
BinTray: limit front parameter
2020-02-01 15:14:12 +01:00
95f2fbeb82
corner(): Make more robust against division by zero
2020-02-01 15:03:49 +01:00
2121228036
TrayLayout: Error out if tray is just a single wall
2020-02-01 14:51:38 +01:00
f8401aac75
rectangularRectangle: Make angle calculation more robust
2020-02-01 14:43:45 +01:00
2a7e1e62d1
PaintStorage: Prevent division by zero
2020-02-01 14:31:24 +01:00
dd0f2d748c
ChestHingeSettings: check pin_height for minimal size
2020-02-01 14:27:17 +01:00
0f3eb5b21a
StackableSettings: check angle for invalid values
2020-02-01 14:16:26 +01:00
9706816fe4
gears: prevent division by zero
2020-02-01 13:59:30 +01:00
37bff9d358
fixed d3 diameter (mounting screw holes)
2020-01-22 16:11:18 +01:00
1f3110c6fa
New generator: TriangleLamp
2020-01-21 21:34:02 +01:00
10e2085eef
Remove Python 2 compat foo
2019-12-21 17:47:54 +01:00
4d53bd17cc
partsMatrix: support width=0 for all parts in one row
2019-12-16 20:07:30 +01:00
e2b87af2a4
UniversalBox: Add outside parameter
...
Fixes : #144
2019-12-14 19:13:40 +01:00
aba9631b00
Make joints of box sides go to the very bottom
...
for NotesHolder, TypeTray and UniversalBox.
The same should be done to many other boxes as soon as they get the
bottom_edge parameter
Resolves : #111
2019-12-14 14:18:38 +01:00
8cb5a8e042
Check values of flex settings
2019-12-14 13:09:43 +01:00
fe9555a79f
checkValues
2019-12-14 13:09:43 +01:00
c5474e7488
DiscRack: Limit lower_factor and rear_factor to smaller than one
2019-12-14 12:23:08 +01:00
024b574763
TrayLayout: Add default for layout param
2019-12-14 12:14:24 +01:00
093e10a3ac
AngledBox: Use FingerJointSettings for vertical edges, too
2019-12-06 23:37:22 +01:00
bd1db150c7
New geneator: SpicesRack
2019-11-29 19:58:27 +01:00
182d222f01
Prevent not having any sections at all for argparseSections
2019-11-24 19:10:35 +01:00
d2d97b01c9
grip(): Prevent division by zero
2019-11-24 16:42:47 +01:00
9f8b84b3f1
add parameters for banana socket and flipswitch diameters
2019-11-20 11:57:13 +01:00
2c367562a9
remove commented code
2019-11-20 11:57:13 +01:00
90fdf897a9
formatting: whitespace cleanup
2019-11-20 11:57:13 +01:00
c67d1f874c
StorageShelf: Add retainer_hole_edge param
...
to allow strengthening the retainer walls by using an h edge.
Also use a h edge on the bottom retainer wall if selected as bottom_edge.
2019-11-09 23:32:12 +01:00
e8cda89381
StorageShelf: Fix holes for inner vertical walls
2019-11-09 23:31:26 +01:00
71711baa1a
StorageShelf: Add retainer wall
...
This patch does not add finger joints to the vertical walls to attach the
retainer walls as the walls are likely to be to small to be able to make use
of them. In hte long run they should be added, though.
2019-11-09 17:10:23 +01:00
0cdc930459
StorageShelf: Change front edge from E to e
...
This makes the shelf one thickness less deep - as it should be
2019-11-09 16:10:30 +01:00
923798beb9
SBCMicroRack: Fix dowel diameter
2019-11-07 15:38:16 +01:00
2860a32360
SBCMicroRack: Comment out unfinished fan parameter
2019-11-07 15:38:16 +01:00
d9c190073b
SBCMicroRack: Don't draw bottom fingerholes twice
2019-11-07 15:38:16 +01:00
af6c9be8f7
SBCMicroRack: Rearrange parts
2019-11-07 15:38:16 +01:00
569eb2f49c
New generator: SBCMicroRack
2019-11-07 15:37:57 +01:00
199251ae52
Add lid for StackableEdge (S) as top_edge
2019-11-04 17:13:12 +01:00
83b5363bc8
StackableEdge: Fix margin for upper (S) variant
2019-11-04 17:05:18 +01:00
4ac46840d2
NotesHolder: Fix various issues
...
Code for opening == 0.0 was broken (See #187 )
Fixed placement of bottom
Fixed margin of USlotEdge
Resolves : #187
2019-11-04 08:52:26 +01:00
927f483c19
New generator: LaserHoldfast - A holdfast for honey comb tables
2019-10-19 23:47:44 +02:00
e2cb90db89
NotesHolder: Split front into two pieces and set better default values
...
Resolves : #129
2019-10-19 21:49:43 +02:00
b0b35d6084
Mention BurnTest in docs and in the burn parameter description
2019-10-19 12:29:56 +02:00
cfbcbb065c
Clarify doc string for FingerJointSettings.play
2019-10-19 12:03:57 +02:00
011024f0a4
TrayLayout: Add comment to clarify the purpose of the classes
...
Resolves : #179
2019-10-18 19:06:07 +02:00
228335a993
BurnTest: fix part placement
2019-10-13 18:42:40 +02:00
89ea774a39
New generator: BurnTest
2019-10-13 18:39:06 +02:00
13ecfc9914
Support springs for finger joints (FingerJointSettings.style)
...
Resolves : #177
2019-10-11 22:32:57 +02:00
f5ed90ca88
SlatwallWrenchHolder: Add extra_distance parameter for Jonas
2019-10-10 20:00:22 +02:00
8afdfdf3f5
New generator: BaynonetBox
2019-09-23 23:44:02 +02:00
877915eb74
Arcade: Make height of monitor and depth of keyboard adjustable
...
Resolves : #166
2019-09-23 21:42:57 +02:00
d6495fc7b4
DrillBox: Fix font size
...
Now that the text() function has a fontsize parameter, setting the font size
on ctx before calling text() has no impact.
Resolves : #173
Thanks to Marko Luther for reporting and suggesting this fix!
2019-09-23 12:15:49 +02:00
3ba90c517c
TrayLayout: Fix cli
...
TrayLayout was still trying to produce a drawing and failed. Now TrayLayout is
not using most of the infrastructure and only TrayLayout2 has the capacity to
create a drawing.
Resolves : #172
2019-09-22 22:37:33 +02:00
b124c96c63
UnevenHeightBox: Use lid and bottom_egde for height calculation
...
when "outside" is set
2019-09-08 23:26:23 +02:00
657b978aa0
StorageShelf: Use top and bottom_egde for height calculation with "outside" set
2019-09-08 23:26:23 +02:00
605692f751
StorageRack: Use top and bottom_egde for height calculation with "outside" set
2019-09-08 23:26:23 +02:00
5c0cc4d732
SlatwallTypeTray: Remove unused code carried over from TypeTray
2019-09-08 23:26:23 +02:00
2b0bdde145
SlatwallTypeTray: Adjust height according to bottom_edge if outside selected
2019-09-08 23:26:23 +02:00
52484b0d55
adjustSize(): add support for edge chars
2019-09-08 23:26:23 +02:00
6c9d23af6e
New generator DividerTray
2019-08-30 21:00:32 +02:00
c3185f5129
Rename to Rack19HalfWidth to better fit with other Rack boxes
...
Move to Box group
Support more than one row of equipement
Move defaults to arguments to conform with general coding style
2019-08-30 12:27:13 +02:00
681ebbb694
add h19rack for a ported half 19inch rackmount
2019-08-30 11:58:21 +02:00
9a17e3efa9
Precompile optimizations REs and fix performance issue
2019-08-22 00:31:45 +02:00
39bd912c90
Harden Extend.addPoint for None arguments
2019-08-18 14:46:13 +02:00
9db79243f8
Make Slide-on Lid with pin easier to insert
...
Make slot half a thickness wider and round the corners
Resolves : #156
Thanks to Matthijs Kooijman for suggesting this change!
2019-08-17 00:05:13 +02:00
0409bcbe65
Fix SVG merging for Inkscape
...
Resolves : #163
2019-08-16 22:37:42 +02:00
65d2293e25
Fix Extend.__add__ for None values
2019-08-15 23:12:35 +02:00
02988d12c5
Catch exceptions from failed ps2edit calls
2019-08-15 23:12:35 +02:00
c81d23e605
SlatwallDrillBox: Fix all kind of errors
2019-08-15 23:12:35 +02:00
e4bdc190bb
Flexbox3: Fix lid length
2019-08-08 22:53:08 +02:00
73422b0faf
Fix name space handling in new svg code
2019-07-31 23:40:48 +02:00
6a3a9b984a
SlatwallTypetray: Fix side joints of front wall (F -> f)
2019-07-31 23:40:06 +02:00
8ecf04cbe8
Fix handling of space in LidSideRight/Left
...
Previously, the extra space was added above the first pin and below the
(optional) second pin. This would cause the lid to misalign with the
holes in the back wall, making it harder to close the lid.
With this commit, the extra space is divided evenly above and below the
nominal position of the pin.
For this to work, the startwidth (or endwidth, depending on the side) is
slightly adjusted (since the start of the first pin slot is actually
generated by the adjacent edge). This moves the starting point, so the
location of the spring hole is adjusted to compensate for that.
2019-07-27 13:30:06 +02:00
3bd4dc9907
Fix spring hole offsets by burn in LidSideRight/Left
2019-07-27 13:30:06 +02:00
4691a65a29
Let LidSideRight/Left respect edge_width
...
This allows modifying the height of the wall that extends above the lid.
The box back wall (with holes) would already support edge_width, so this
makes it supported on all three walls where needed.
2019-07-27 13:30:06 +02:00
db1da4ec12
Fix hole positions offset by burn in FingerHoleEdge
...
When rendering the FingerHoleEdge, the current position would be
corrected for burn (e.g. it would be on the center of the laser path,
rather than the actual edge of the final part). However, the FingerHoles
class (or actually the rectangularHole method called by it) that draws
the actual holes already corrects for burn, which caused the hole
position to be offset by the burn value.
This offset was particularly problematic when making a sliding lid,
since the holes would not align perfectly with the lid, making it hard
to close the lid. With this change, the sliding slots in the side walls
and the holes in the back wall align perfectly (though only when the lid
settings have zero play, which is a separate problem).
This commit fixes FingerHoleEdge (and its subclass LidHoleEdge), but
there might be other users of the FingerHole class (usually indirectly
through boxes.fingerHolesAt) that still have the same problem.
2019-07-27 13:30:06 +02:00
eeb2c344d5
Clarify where l and L edges should be used
2019-07-27 13:30:06 +02:00
Florian Festi
iooner
Mateusz Konieczny
0xfab1
jens persson
Marcin Zukowski
Norbert Szulc
Guillaume Collic
jomjol
Ba-So
Stefan Schwarz
Thomas Kalka
Erwin Jansen
Stefan Reichhard
Marius Bergmann
gmorell
Matthijs Kooijman