Commit Graph

697 Commits

Author SHA1 Message Date
Florian Festi 95f2fbeb82 corner(): Make more robust against division by zero 2020-02-01 15:03:49 +01:00
Florian Festi 2121228036 TrayLayout: Error out if tray is just a single wall 2020-02-01 14:51:38 +01:00
Florian Festi f8401aac75 rectangularRectangle: Make angle calculation more robust 2020-02-01 14:43:45 +01:00
Florian Festi 2a7e1e62d1 PaintStorage: Prevent division by zero 2020-02-01 14:31:24 +01:00
Florian Festi dd0f2d748c ChestHingeSettings: check pin_height for minimal size 2020-02-01 14:27:17 +01:00
Florian Festi 0f3eb5b21a StackableSettings: check angle for invalid values 2020-02-01 14:16:26 +01:00
Florian Festi 9706816fe4 gears: prevent division by zero 2020-02-01 13:59:30 +01:00
Stefan Reichhard 37bff9d358 fixed d3 diameter (mounting screw holes) 2020-01-22 16:11:18 +01:00
Florian Festi 1f3110c6fa New generator: TriangleLamp 2020-01-21 21:34:02 +01:00
Florian Festi 10e2085eef Remove Python 2 compat foo 2019-12-21 17:47:54 +01:00
Florian Festi 4d53bd17cc partsMatrix: support width=0 for all parts in one row 2019-12-16 20:07:30 +01:00
Florian Festi e2b87af2a4 UniversalBox: Add outside parameter
Fixes: #144
2019-12-14 19:13:40 +01:00
Florian Festi aba9631b00 Make joints of box sides go to the very bottom
for NotesHolder, TypeTray and UniversalBox.
The same should be done to many other boxes as soon as they get the
bottom_edge parameter

Resolves: #111
2019-12-14 14:18:38 +01:00
Florian Festi 8cb5a8e042 Check values of flex settings 2019-12-14 13:09:43 +01:00
Florian Festi fe9555a79f checkValues 2019-12-14 13:09:43 +01:00
Florian Festi c5474e7488 DiscRack: Limit lower_factor and rear_factor to smaller than one 2019-12-14 12:23:08 +01:00
Florian Festi 024b574763 TrayLayout: Add default for layout param 2019-12-14 12:14:24 +01:00
Florian Festi 093e10a3ac AngledBox: Use FingerJointSettings for vertical edges, too 2019-12-06 23:37:22 +01:00
Florian Festi bd1db150c7 New geneator: SpicesRack 2019-11-29 19:58:27 +01:00
Florian Festi 182d222f01 Prevent not having any sections at all for argparseSections 2019-11-24 19:10:35 +01:00
Florian Festi d2d97b01c9 grip(): Prevent division by zero 2019-11-24 16:42:47 +01:00
Marius Bergmann 9f8b84b3f1 add parameters for banana socket and flipswitch diameters 2019-11-20 11:57:13 +01:00
Marius Bergmann 2c367562a9 remove commented code 2019-11-20 11:57:13 +01:00
Marius Bergmann 90fdf897a9 formatting: whitespace cleanup 2019-11-20 11:57:13 +01:00
Florian Festi c67d1f874c StorageShelf: Add retainer_hole_edge param
to allow strengthening the retainer walls by using an h edge.
Also use a h edge on the bottom retainer wall if selected as bottom_edge.
2019-11-09 23:32:12 +01:00
Florian Festi e8cda89381 StorageShelf: Fix holes for inner vertical walls 2019-11-09 23:31:26 +01:00
Florian Festi 71711baa1a StorageShelf: Add retainer wall
This patch does not add finger joints to the vertical walls to attach the
retainer walls as the walls are likely to be to small to be able to make use
of them. In hte long run they should be added, though.
2019-11-09 17:10:23 +01:00
Florian Festi 0cdc930459 StorageShelf: Change front edge from E to e
This makes the shelf one thickness less deep - as it should be
2019-11-09 16:10:30 +01:00
Florian Festi 923798beb9 SBCMicroRack: Fix dowel diameter 2019-11-07 15:38:16 +01:00
Florian Festi 2860a32360 SBCMicroRack: Comment out unfinished fan parameter 2019-11-07 15:38:16 +01:00
Florian Festi d9c190073b SBCMicroRack: Don't draw bottom fingerholes twice 2019-11-07 15:38:16 +01:00
Florian Festi af6c9be8f7 SBCMicroRack: Rearrange parts 2019-11-07 15:38:16 +01:00
gmorell 569eb2f49c New generator: SBCMicroRack 2019-11-07 15:37:57 +01:00
Florian Festi 199251ae52 Add lid for StackableEdge (S) as top_edge 2019-11-04 17:13:12 +01:00
Florian Festi 83b5363bc8 StackableEdge: Fix margin for upper (S) variant 2019-11-04 17:05:18 +01:00
Florian Festi 4ac46840d2 NotesHolder: Fix various issues
Code for opening == 0.0 was broken (See #187)
Fixed placement of bottom
Fixed margin of USlotEdge

Resolves: #187
2019-11-04 08:52:26 +01:00
Florian Festi 927f483c19 New generator: LaserHoldfast - A holdfast for honey comb tables 2019-10-19 23:47:44 +02:00
Florian Festi e2cb90db89 NotesHolder: Split front into two pieces and set better default values
Resolves: #129
2019-10-19 21:49:43 +02:00
Florian Festi b0b35d6084 Mention BurnTest in docs and in the burn parameter description 2019-10-19 12:29:56 +02:00
Florian Festi cfbcbb065c Clarify doc string for FingerJointSettings.play 2019-10-19 12:03:57 +02:00
Florian Festi 011024f0a4 TrayLayout: Add comment to clarify the purpose of the classes
Resolves: #179
2019-10-18 19:06:07 +02:00
Florian Festi 228335a993 BurnTest: fix part placement 2019-10-13 18:42:40 +02:00
Florian Festi 89ea774a39 New generator: BurnTest 2019-10-13 18:39:06 +02:00
Florian Festi 13ecfc9914 Support springs for finger joints (FingerJointSettings.style)
Resolves: #177
2019-10-11 22:32:57 +02:00
Florian Festi f5ed90ca88 SlatwallWrenchHolder: Add extra_distance parameter for Jonas 2019-10-10 20:00:22 +02:00
Florian Festi 8afdfdf3f5 New generator: BaynonetBox 2019-09-23 23:44:02 +02:00
Florian Festi 877915eb74 Arcade: Make height of monitor and depth of keyboard adjustable
Resolves: #166
2019-09-23 21:42:57 +02:00
Florian Festi d6495fc7b4 DrillBox: Fix font size
Now that the text() function has a fontsize parameter, setting the font size
on ctx before calling text() has no impact.

Resolves: #173

Thanks to Marko Luther for reporting and suggesting this fix!
2019-09-23 12:15:49 +02:00
Florian Festi 3ba90c517c TrayLayout: Fix cli
TrayLayout was still trying to produce a drawing and failed. Now TrayLayout is
not using most of the infrastructure and only TrayLayout2 has the capacity to
create a drawing.

Resolves: #172
2019-09-22 22:37:33 +02:00
Florian Festi b124c96c63 UnevenHeightBox: Use lid and bottom_egde for height calculation
when "outside" is set
2019-09-08 23:26:23 +02:00
Florian Festi 657b978aa0 StorageShelf: Use top and bottom_egde for height calculation with "outside" set 2019-09-08 23:26:23 +02:00
Florian Festi 605692f751 StorageRack: Use top and bottom_egde for height calculation with "outside" set 2019-09-08 23:26:23 +02:00
Florian Festi 5c0cc4d732 SlatwallTypeTray: Remove unused code carried over from TypeTray 2019-09-08 23:26:23 +02:00
Florian Festi 2b0bdde145 SlatwallTypeTray: Adjust height according to bottom_edge if outside selected 2019-09-08 23:26:23 +02:00
Florian Festi 52484b0d55 adjustSize(): add support for edge chars 2019-09-08 23:26:23 +02:00
Guillaume Collic 6c9d23af6e New generator DividerTray 2019-08-30 21:00:32 +02:00
Florian Festi c3185f5129 Rename to Rack19HalfWidth to better fit with other Rack boxes
Move to Box group
Support more than one row of equipement
Move defaults to arguments to conform with general coding style
2019-08-30 12:27:13 +02:00
Stefan Schwarz 681ebbb694 add h19rack for a ported half 19inch rackmount 2019-08-30 11:58:21 +02:00
Florian Festi 9a17e3efa9 Precompile optimizations REs and fix performance issue 2019-08-22 00:31:45 +02:00
Florian Festi 39bd912c90 Harden Extend.addPoint for None arguments 2019-08-18 14:46:13 +02:00
Florian Festi 9db79243f8 Make Slide-on Lid with pin easier to insert
Make slot half a thickness wider and round the corners

Resolves: #156

Thanks to Matthijs Kooijman for suggesting this change!
2019-08-17 00:05:13 +02:00
Florian Festi 0409bcbe65 Fix SVG merging for Inkscape
Resolves: #163
2019-08-16 22:37:42 +02:00
Florian Festi 65d2293e25 Fix Extend.__add__ for None values 2019-08-15 23:12:35 +02:00
Florian Festi 02988d12c5 Catch exceptions from failed ps2edit calls 2019-08-15 23:12:35 +02:00
Florian Festi c81d23e605 SlatwallDrillBox: Fix all kind of errors 2019-08-15 23:12:35 +02:00
Florian Festi e4bdc190bb Flexbox3: Fix lid length 2019-08-08 22:53:08 +02:00
Florian Festi 73422b0faf Fix name space handling in new svg code 2019-07-31 23:40:48 +02:00
Florian Festi 6a3a9b984a SlatwallTypetray: Fix side joints of front wall (F -> f) 2019-07-31 23:40:06 +02:00
Matthijs Kooijman 8ecf04cbe8 Fix handling of space in LidSideRight/Left
Previously, the extra space was added above the first pin and below the
(optional) second pin. This would cause the lid to misalign with the
holes in the back wall, making it harder to close the lid.

With this commit, the extra space is divided evenly above and below the
nominal position of the pin.

For this to work, the startwidth (or endwidth, depending on the side) is
slightly adjusted (since the start of the first pin slot is actually
generated by the adjacent edge). This moves the starting point, so the
location of the spring hole is adjusted to compensate for that.
2019-07-27 13:30:06 +02:00
Matthijs Kooijman 3bd4dc9907 Fix spring hole offsets by burn in LidSideRight/Left 2019-07-27 13:30:06 +02:00
Matthijs Kooijman 4691a65a29 Let LidSideRight/Left respect edge_width
This allows modifying the height of the wall that extends above the lid.

The box back wall (with holes) would already support edge_width, so this
makes it supported on all three walls where needed.
2019-07-27 13:30:06 +02:00
Matthijs Kooijman db1da4ec12 Fix hole positions offset by burn in FingerHoleEdge
When rendering the FingerHoleEdge, the current position would be
corrected for burn (e.g. it would be on the center of the laser path,
rather than the actual edge of the final part). However, the FingerHoles
class (or actually the rectangularHole method called by it) that draws
the actual holes already corrects for burn, which caused the hole
position to be offset by the burn value.

This offset was particularly problematic when making a sliding lid,
since the holes would not align perfectly with the lid, making it hard
to close the lid. With this change, the sliding slots in the side walls
and the holes in the back wall align perfectly (though only when the lid
settings have zero play, which is a separate problem).

This commit fixes FingerHoleEdge (and its subclass LidHoleEdge), but
there might be other users of the FingerHole class (usually indirectly
through boxes.fingerHolesAt) that still have the same problem.
2019-07-27 13:30:06 +02:00
Matthijs Kooijman eeb2c344d5 Clarify where l and L edges should be used 2019-07-27 13:30:06 +02:00
Marko Luther ca1a3575d0 forward holesSettings to hexHolesRectangle from within rectangularWall 2019-07-21 01:21:55 +02:00
Rotzbua c06b95d2d0 link: http -> https 2019-07-20 00:23:29 +02:00
Florian Festi 0a55e9ca6b Optimize SVG paths
Resolves #63
2019-07-19 21:49:55 +02:00
Florian Festi a38254667c Remove no longer needed line in _template.py 2019-07-18 20:55:07 +02:00
Florian Festi 17d7cd80ab Don't show generators in modules starting with underscore (templates) 2019-07-12 00:47:09 +02:00
Florian Festi 11174f2ecc New generator SlatwallDrillBox 2019-07-12 00:43:06 +02:00
Florian Festi 88e99a5726 New generator: FlexBox5
Resolves #147
2019-07-12 00:24:50 +02:00
Florian Festi e6f431ab15 New generator: MakitaPowerSupply 2019-07-07 16:26:29 +02:00
Florian Festi fff74cf382 Add metadata as a xml comment
Resolves #66
2019-07-07 13:43:04 +02:00
Florian Festi a19debf1bd Rename remaining Slatwall generators from Sw* to Slatwall* 2019-07-04 22:59:32 +02:00
Florian Festi 573b630adc New generator: SlatwallPlaneHolder 2019-07-04 22:39:34 +02:00
Florian Festi 31d46088c2 Move drawing to origin for SVGs 2019-07-04 17:52:28 +02:00
Florian Festi 635a42a25e Use eTree to caclulate the eytend of the drawing
Also check symbols (text character) now
2019-07-04 17:52:28 +02:00
Florian Festi d162c769b4 Use built in eTree implementation instead of lxml 2019-07-04 17:52:08 +02:00
Florian Festi 4a9cdc8d8e Switch to eTree as a xml library (instead of minidom) 2019-07-04 17:48:53 +02:00
Stefan Grosshauser 443c8a1c38 properly rewrite svg viewPort using minidom for xml
This avoids raising the 'Not enough space for size' exception.
2019-07-04 17:48:53 +02:00
Florian Festi abdab6866a New generator: StorageRack - Box with rails to slide other boxes in 2019-06-30 20:53:42 +02:00
Florian Festi 2f7603b4b4 New generator: SlatWallWrenchHolder 2019-06-30 20:53:42 +02:00
Florian Festi 0105957c05 New generator: SlatWallChiselHolder 2019-06-30 17:19:02 +02:00
Florian Festi 138dffbf2a New generator: SlatWallCaliperHolder 2019-06-30 15:48:09 +02:00
Florian Festi be8aed394a New generator: Slatwall PlaneHolder 2019-06-30 15:18:11 +02:00
Florian Festi 09df973d69 New generator: SlatwallConsole - an outset and angled plate to mount stuff to 2019-06-22 00:07:23 +02:00
Florian Festi 810c3dbe3e New generator: SwTypeTray - a tray to hang at a slat wall 2019-06-22 00:05:57 +02:00
Florian Festi f1ce996aae New generator: SwPliersHolder - a bar to hang pliers on 2019-06-22 00:04:30 +02:00
Florian Festi 6c85ae7ea2 Add trapezoidSideWall() that supports radius param for additional strength 2019-06-21 23:16:59 +02:00
Florian Festi 6a809e17e7 Move trapezoidWall() from UnevenHeightBox to Boxes class 2019-06-21 21:37:57 +02:00
Florian Festi 01ca56fdce Support all different section syntaxes (sx, sy, ...) side by side 2019-06-21 21:37:57 +02:00