Commit Graph

633 Commits

Author SHA1 Message Date
Florian Festi c81d23e605 SlatwallDrillBox: Fix all kind of errors 2019-08-15 23:12:35 +02:00
Florian Festi e4bdc190bb Flexbox3: Fix lid length 2019-08-08 22:53:08 +02:00
Florian Festi 73422b0faf Fix name space handling in new svg code 2019-07-31 23:40:48 +02:00
Florian Festi 6a3a9b984a SlatwallTypetray: Fix side joints of front wall (F -> f) 2019-07-31 23:40:06 +02:00
Matthijs Kooijman 8ecf04cbe8 Fix handling of space in LidSideRight/Left
Previously, the extra space was added above the first pin and below the
(optional) second pin. This would cause the lid to misalign with the
holes in the back wall, making it harder to close the lid.

With this commit, the extra space is divided evenly above and below the
nominal position of the pin.

For this to work, the startwidth (or endwidth, depending on the side) is
slightly adjusted (since the start of the first pin slot is actually
generated by the adjacent edge). This moves the starting point, so the
location of the spring hole is adjusted to compensate for that.
2019-07-27 13:30:06 +02:00
Matthijs Kooijman 3bd4dc9907 Fix spring hole offsets by burn in LidSideRight/Left 2019-07-27 13:30:06 +02:00
Matthijs Kooijman 4691a65a29 Let LidSideRight/Left respect edge_width
This allows modifying the height of the wall that extends above the lid.

The box back wall (with holes) would already support edge_width, so this
makes it supported on all three walls where needed.
2019-07-27 13:30:06 +02:00
Matthijs Kooijman db1da4ec12 Fix hole positions offset by burn in FingerHoleEdge
When rendering the FingerHoleEdge, the current position would be
corrected for burn (e.g. it would be on the center of the laser path,
rather than the actual edge of the final part). However, the FingerHoles
class (or actually the rectangularHole method called by it) that draws
the actual holes already corrects for burn, which caused the hole
position to be offset by the burn value.

This offset was particularly problematic when making a sliding lid,
since the holes would not align perfectly with the lid, making it hard
to close the lid. With this change, the sliding slots in the side walls
and the holes in the back wall align perfectly (though only when the lid
settings have zero play, which is a separate problem).

This commit fixes FingerHoleEdge (and its subclass LidHoleEdge), but
there might be other users of the FingerHole class (usually indirectly
through boxes.fingerHolesAt) that still have the same problem.
2019-07-27 13:30:06 +02:00
Matthijs Kooijman eeb2c344d5 Clarify where l and L edges should be used 2019-07-27 13:30:06 +02:00
Marko Luther ca1a3575d0 forward holesSettings to hexHolesRectangle from within rectangularWall 2019-07-21 01:21:55 +02:00
Rotzbua c06b95d2d0 link: http -> https 2019-07-20 00:23:29 +02:00
Florian Festi 0a55e9ca6b Optimize SVG paths
Resolves #63
2019-07-19 21:49:55 +02:00
Florian Festi a38254667c Remove no longer needed line in _template.py 2019-07-18 20:55:07 +02:00
Florian Festi 17d7cd80ab Don't show generators in modules starting with underscore (templates) 2019-07-12 00:47:09 +02:00
Florian Festi 11174f2ecc New generator SlatwallDrillBox 2019-07-12 00:43:06 +02:00
Florian Festi 88e99a5726 New generator: FlexBox5
Resolves #147
2019-07-12 00:24:50 +02:00
Florian Festi e6f431ab15 New generator: MakitaPowerSupply 2019-07-07 16:26:29 +02:00
Florian Festi fff74cf382 Add metadata as a xml comment
Resolves #66
2019-07-07 13:43:04 +02:00
Florian Festi a19debf1bd Rename remaining Slatwall generators from Sw* to Slatwall* 2019-07-04 22:59:32 +02:00
Florian Festi 573b630adc New generator: SlatwallPlaneHolder 2019-07-04 22:39:34 +02:00
Florian Festi 31d46088c2 Move drawing to origin for SVGs 2019-07-04 17:52:28 +02:00
Florian Festi 635a42a25e Use eTree to caclulate the eytend of the drawing
Also check symbols (text character) now
2019-07-04 17:52:28 +02:00
Florian Festi d162c769b4 Use built in eTree implementation instead of lxml 2019-07-04 17:52:08 +02:00
Florian Festi 4a9cdc8d8e Switch to eTree as a xml library (instead of minidom) 2019-07-04 17:48:53 +02:00
Stefan Grosshauser 443c8a1c38 properly rewrite svg viewPort using minidom for xml
This avoids raising the 'Not enough space for size' exception.
2019-07-04 17:48:53 +02:00
Florian Festi abdab6866a New generator: StorageRack - Box with rails to slide other boxes in 2019-06-30 20:53:42 +02:00
Florian Festi 2f7603b4b4 New generator: SlatWallWrenchHolder 2019-06-30 20:53:42 +02:00
Florian Festi 0105957c05 New generator: SlatWallChiselHolder 2019-06-30 17:19:02 +02:00
Florian Festi 138dffbf2a New generator: SlatWallCaliperHolder 2019-06-30 15:48:09 +02:00
Florian Festi be8aed394a New generator: Slatwall PlaneHolder 2019-06-30 15:18:11 +02:00
Florian Festi 09df973d69 New generator: SlatwallConsole - an outset and angled plate to mount stuff to 2019-06-22 00:07:23 +02:00
Florian Festi 810c3dbe3e New generator: SwTypeTray - a tray to hang at a slat wall 2019-06-22 00:05:57 +02:00
Florian Festi f1ce996aae New generator: SwPliersHolder - a bar to hang pliers on 2019-06-22 00:04:30 +02:00
Florian Festi 6c85ae7ea2 Add trapezoidSideWall() that supports radius param for additional strength 2019-06-21 23:16:59 +02:00
Florian Festi 6a809e17e7 Move trapezoidWall() from UnevenHeightBox to Boxes class 2019-06-21 21:37:57 +02:00
Florian Festi 01ca56fdce Support all different section syntaxes (sx, sy, ...) side by side 2019-06-21 21:37:57 +02:00
Florian Festi db706fc939 SlatWall edges: Make bottom hook selectable, various fixes 2019-06-21 21:36:28 +02:00
Florian Festi 1e35a3b9ed New generator: SwSlottedHolder
A tool holder for slat wall
2019-06-21 21:22:10 +02:00
Florian Festi 5cef906a9a Add SlatWallHoleEdge (dD) classes
Similar to FigerHolesEdge (h)
2019-06-21 18:47:29 +02:00
Florian Festi 9415a6864f Add boxes/generators/_swtemplate.py as a starting point for Slat Wall boxes 2019-06-13 19:02:02 +02:00
Florian Festi aadf5ceafc Add Edge types, example and UIGroup for slat wall compatible boxes 2019-06-13 19:00:32 +02:00
chrysn 753422fa46 New generator DiscRack
A rack for storing disk-shaped objects vertically next to each other
2019-06-01 13:09:01 +02:00
Germain Lemasson e8e248994b Add a StorageSelf generator. This is a shelf for storing TypeTray boxes.
It is based on TypeTray generator. The sh parameter replace the sx parameter.
It is not a subclasse of TypeTray in order to have the top and bottom at
the right place.
2019-06-01 12:52:34 +02:00
Florian Festi a6ca723759 Mirror holes on the other walls
to have them match up. Otherwise boxes with non symetric top edges don't fit
together.

Fixes #141
2019-05-11 17:18:10 +02:00
Florian Festi 46157b2030 Add .mirrorX() and .mirrorY() wrappers
These are especially useful for warpping callbacks.
2019-05-11 17:17:11 +02:00
Florian Festi 93c2093ef3 AllEdges: Fix spacing and add edegs around the corner
to make it more clear which direction the edges are pointing.

Related #132
2019-04-14 18:17:09 +02:00
Florian Festi f22be6f6d5 Fix polygonWalls for inner corners 2019-04-14 18:17:09 +02:00
Florian Festi 0b781ce7ef Add turtle param to polygonWall
to allow using it as turtle graphic command instead of a part
2019-04-14 18:17:09 +02:00
Florian Festi dc11929258 Fix _polygonWallExtend for corners with negative angles 2019-04-14 18:17:09 +02:00
chrysn 95dba0dee7 box: raise NotImplementedError
NotImplemented is a sentinel for comparisons; encountering this as an
exception would result in a meta-error.
2019-04-10 17:56:12 +02:00
Florian Festi ce8576d39e New generator: HeartBox 2019-03-24 21:52:26 +01:00
Florian Festi 7aec26e893 New .polygonWall() part
Similar to .polyline() but with (f) edges on the outside
.polygonWalls draws the surrounding walls
2019-03-24 21:50:36 +01:00
Florian Festi 4f4d947253 .corner(): Fix tabs for small arcs 2019-03-24 21:50:11 +01:00
Florian Festi f178215f20 .corner(): Also accept (angle, radius) tuples 2019-03-24 21:50:11 +01:00
Florian Festi c09ee50fbd New generator: NotesHolder 2019-03-23 12:36:21 +01:00
Florian Festi 8bacd1f766 UniversalBox: Fix missing lids for various top_edges
Call got refactored away

Resolves: #121
2019-02-27 22:58:05 +01:00
Martin Müller fb4791f803 Fix typo in help text for tabs 2019-02-26 00:02:30 +01:00
Florian Festi cbb000f12e DoveTailJoint: remove no longer needed ctx.translate 2019-02-24 14:45:57 +01:00
Florian Festi abed8c06ac FingerHoles: use .saved_context() 2019-02-24 14:42:48 +01:00
Florian Festi 72617110cf FingerHoleEdge: Use modern code and add tab support 2019-02-24 13:14:21 +01:00
Florian Festi eb5f3008da RoundedTriangleEdge: Add tabs 2019-02-24 12:16:47 +01:00
Florian Festi 8640514daf Omit reference for svg_Ponoko format 2019-02-14 21:36:54 +01:00
Florian Festi 8db3942757 UniversalBox: Fix positioning of lid parts 2019-02-14 21:32:27 +01:00
Florian Festi 25ea02d317 Handle the drawing reaching into the negative x axis properly 2019-02-14 21:15:28 +01:00
Florian Festi c6e872a146 Add tabs to .parts 2019-02-14 17:34:22 +01:00
Florian Festi 81708bbbca .polyline: mention tabs feature in doc string 2019-02-14 17:32:59 +01:00
Florian Festi 3a0e34eed8 Fix NutHole which broke after switching over to saved_context 2019-02-14 17:31:56 +01:00
Florian Festi 679234afd3 Fix docstrings of .open() and .close() to match new use pattern 2019-02-13 09:04:57 +01:00
Florian Festi 9b1ce265bf Make docstrings ready for autodoc 2019-02-13 09:01:20 +01:00
Florian Festi e3ba617f22 Fix traceback for top_edge == "L"
No longer access the t1 edge type after changing it which may lead
to t1 being a char instead of a Edge instance

Thanks to michael (https://hackaday.io/hacker/381347-michael) for
pointing this out!
2019-02-10 19:49:51 +01:00
Florian Festi 0d07f48b7f Remove .open() call from the .render() method
Having this call there was necessary in the past as the open() method would
need the canvas size as a parameter. This is now determined automatically
after rendering.

Still calling open() is deprecated but won't result in an error.
2019-02-08 17:43:15 +01:00
Florian Festi 861c8451e2 Remove call to .close() from .render() method
There is really no need for all the generator to care
Still calling it is deprecated but won't result in an error
2019-02-08 17:32:04 +01:00
Florian Festi 2ba6fa1bf3 Use .saved_context() instead of .ctx.save() and .restore() 2019-02-07 22:43:04 +01:00
Florian Festi 1724f67bdf Delete never to be finished printer generator
This should have become a 3D printer using strings in a delta configuration.
2019-02-07 22:43:04 +01:00
Florian Festi ded5addbe9 Remove no longer needed calls to ctx.stroke()
Boxes.move() take care of that nowadays
2019-02-07 22:43:04 +01:00
Florian Festi 80ab24dceb Fix format of doc strings 2019-02-07 17:42:41 +01:00
Wayne Wylupski c5d434105b Add svg_Ponoko output format
This is just regular SVG with Ponoko-specific line properties
Yes, the lines are too thin to be seen in a regular web browser.

Resolves: #112
2019-02-03 16:30:28 +01:00
Wayne Wylupski abacdd486e Implement proper color handling
Avoid accessing Boxes.ctx (the cairo context) all over the code.
Have named colors
2019-02-03 16:28:02 +01:00
Wayne Wylupski c573914bcd Add Boxes.saved_context() context manager
Avoid directly accessing Boxes.ctx (the cairo context) all over the place.
Also have a more modern API for returning to a previous spot.
2019-02-03 16:25:31 +01:00
Wayne Wylupski acb457be2a Add GPL copy right header 2019-02-02 18:05:04 +01:00
Florian Festi 2e5a19a40f Python 2 compat fix 2019-01-12 18:42:44 +01:00
Florian Festi 6f4e94577b New generator: RectangularWall 2019-01-12 15:28:17 +01:00
Florian Festi dac6b3ac3d Fix Edge descriptions
Add descriptions for edges that don't have their own class

Make ChestHingeFront sub class of Edge as BaseEdge no longer draws anything
2019-01-12 15:28:17 +01:00
Florian Festi 1739d11af5 Doc string for GearSettings 2019-01-12 15:28:17 +01:00
Florian Festi d0356a12a3 Add parameters to addTopEdgeSettings() for changed defaults 2019-01-12 00:07:37 +01:00
Florian Festi ba3cacbf93 RoundedTriangleEdge: Add outset setting 2019-01-12 00:07:22 +01:00
Florian Festi 2747d9719a Add RoundedTriangleEdge to top_edges 2019-01-12 00:00:55 +01:00
Florian Festi 31fd0024ee Add RoundedTriangleEdge t
Based on the Caddy generator by bobm123 in the PR #14
(https://github.com/florianfesti/boxes/pull/14)

Edge will be added to the TypeTray generator to achieve similar results as Caddy

Co-authored-by: bobm123 <bobm123@gmail.com>
2019-01-11 23:56:28 +01:00
Florian Festi 64fb498e6e UniversalBox: Use a more robust way of placing the pieces
No longer rely on all side walls having the same height
2019-01-11 19:41:02 +01:00
Florian Festi 97e7e3b68f TypeTray: Swap vertical edge types to match the layout of the UniversalBox 2019-01-11 19:41:02 +01:00
Florian Festi 5c70515f01 TypeTray: Add lids matching top_edge 2019-01-10 22:27:36 +01:00
Florian Festi 371097aa89 PaintStorage: Make grip hole smaller and more rounded
Fixes #108
2019-01-10 22:09:45 +01:00
Florian Festi c0a782b745 TypeTray: Add support for all top_edges 2019-01-03 11:13:27 +01:00
Florian Festi c2615d4b38 TypeTray: rearrange parts 2018-12-27 17:19:10 +01:00
Florian Festi 73050d4969 Make .continueDirection() more private 2018-12-22 17:23:33 +01:00
Florian Festi 2df63b6ec8 ShutterBox: Add style with two rounded corners
Move generator to FlexBox category
2018-12-19 18:04:34 +01:00
Florian Festi 879b3149bb New generator: ShutterBox
A box with a rolling shutter made out of flex
2018-12-13 18:39:01 +01:00
Florian Festi 4a79c37e71 CardBox: Add gripping ledge to the lid 2018-12-11 19:33:52 +01:00
Florian Festi 4d2592fecf Add e edge to bottom_edge selection 2018-12-08 18:22:13 +01:00
Florian Festi fd956d1f08 rectangularHole(): clamp corner radius to available space 2018-12-08 12:42:36 +01:00