Commit Graph

258 Commits

Author SHA1 Message Date
Florian Festi 8f03030c53 PaintStorage: Add carrying hole 2018-12-08 12:37:20 +01:00
Florian Festi 925c6ce6dc PaintStand: Fix previous change 2018-11-24 22:47:35 +01:00
Florian Festi 17e4eb8563 PaintStorage: Fix heights 2018-11-15 22:10:19 +01:00
Florian Festi d85fa4e849 LaserClamp: Improve design
Extend bottom bracket and add hook
Use only one bottom bracket
Add finger ring to allow easier placement
Improve top hook
2018-11-05 22:08:23 +01:00
Florian Festi 0f999a89ad New generator: AllEdges showing all the standard edge types 2018-11-05 21:38:49 +01:00
Florian Festi fe89528e05 PaintStorage: Add support for hexagonal hole patterns 2018-10-29 18:16:16 +01:00
Florian Festi 36077e6cb0 PaintStorage: Optimize part placement 2018-10-29 15:44:18 +01:00
jens persson c28541a977 Add a generator for paintstand
A simple stackable paintstand, very much inspired by:
https://www.youtube.com/watch?v=6HJarJg1npk
2018-10-29 15:11:35 +01:00
jens persson e95f36a18a Parameterize Silverwarebox
Make the messurements selectable
2018-10-28 13:19:37 +01:00
Florian Festi 80288079af New generator: TwoPiece
Based on a generator with the same name by bobm123<bobm123@gmail.com>
2018-10-25 22:35:20 +02:00
Florian Festi 5b93c1228d CardBox: Add num param for the number of decks 2018-10-25 17:36:46 +02:00
Alexander Bulimov 5a13fbea8b Add DisplayCase generator 2018-10-24 21:28:54 +02:00
Florian Festi 2060293cf3 New generator: RoyalGame of Ur 2018-10-24 21:23:57 +02:00
Florian Festi 397cc81690 FlexBox3: Use .move()
Use .edgeCorner() instead of own implementation
2018-10-19 22:12:13 +02:00
Florian Festi f7c2d91e42 FlexBox2: Make latchsize configurable 2018-10-19 21:46:30 +02:00
Florian Festi 417a053ad3 FlexBox2: Use .move() 2018-10-19 21:45:26 +02:00
Florian Festi 4d76457d3a FlexBox: Make latchsize configurable 2018-10-19 21:35:11 +02:00
Florian Festi 791ef0fdca FlexBox: Use .move() 2018-10-19 21:33:52 +02:00
Florian Festi a9009732ac FlexBox4: Make latchsize configurable 2018-10-19 19:20:23 +02:00
Florian Festi 4ba18d87b7 FlexBox4: Modernize a bit and use .move() 2018-10-19 19:15:55 +02:00
Florian Festi 1cf671ddd2 FlexBox4: Calculate length of flex after adjusting the radius 2018-10-19 10:02:16 +02:00
jens persson 716fd389e3 Add a box for storage of playingcards
The box have place for two stacks of cards with a divider between.
It have a slide in lid.
2018-10-09 16:55:34 +02:00
Florian Festi 14c6338713 New generator: LaserClamp 2018-10-06 22:55:46 +02:00
Florian Festi b07983582e HingeBox: Add support for split lids 2018-09-30 15:31:16 +02:00
Florian Festi b8ff1b8cf6 TrayLayout: Make parsing a bit more robust
Ignore white space at the end of lines with horizontal walls
2018-08-27 16:55:00 +02:00
Florian Festi b4a95aca15 TrayLayout: Fix burn correction for bottom plate
All edges were missing the burn correction outset (aka kerf).
2018-08-27 15:13:31 +02:00
Florian Festi d360703cba TypeTray: Make bottom_edge parametric
This does not affect the inside walls
2018-08-16 20:49:12 +02:00
Florian Festi 8563818925 Hook: Boxify and parametrize generator 2018-08-14 14:01:59 +02:00
Marius Bergmann 2831b41d21 Add wall hook generator 2018-08-14 11:55:31 +02:00
Florian Festi f83ca31a0a RoundedBox: Add wallpieces param 2018-08-06 19:46:48 +02:00
Florian Festi 7c8ae621f7 CloseBox: Put bed blots at the right places
Keep them still disabled, though.
2018-07-25 16:34:58 +02:00
Florian Festi 44bce898e0 UniversalBox: Add alternative "lid" for f and F top_edges:
A rim leaving the box open
2018-07-02 19:07:26 +02:00
Sebastian Reichel 8b172cbddd Add 10" rack box derived from 19" rack box 2018-06-27 21:48:35 +02:00
Florian Festi 6538c92910 OrganPipe: Offer multiple units for the pressure given 2018-05-18 14:12:30 +02:00
Florian Festi 1d0aa05e9a OrganPipe: Use unicode for Py 2 compat 2018-05-12 17:14:02 +02:00
Florian Festi d9e8930e31 OrganPipe: Add encoding 2018-05-12 17:11:26 +02:00
Florian Festi 4798c24815 New generator: Organ pipe
Still untested
2018-05-12 17:06:10 +02:00
Florian Festi 50b9bc9ffb TypeTray: Fix finger holes in bottom which had been mirrored in x direction 2018-04-25 23:36:32 +02:00
Florian Festi 616bf42239 RegularBox: Fix top edge for "angled hole" top 2018-04-25 22:02:52 +02:00
Florian Festi d3c922d289 RegularBox: Use FingerJointSettings for vertical edges, too
Fixes #65
2018-04-25 22:02:24 +02:00
Florian Festi 879ae1af68 DisplayShelf: Do not render front wall if set to zero 2018-04-15 19:43:31 +02:00
Florian Festi ebe02e2be5 DisplayShelf: Use better defaults 2018-04-15 19:43:31 +02:00
Florian Festi b2c54310b6 UnevenHeightBox: Fix lid
Looks like it is difficult to come up with a really non symmectrical test case.
Thanks to Mekol for pointing this out!

Related #60
2018-03-17 21:04:24 +01:00
Florian Festi fa44eb27cf UneveHeigthBox: Minor tweaks 2018-03-17 17:32:21 +01:00
Florian Festi 58cb06ec94 UnevenHeightBox: Add lid 2018-03-17 17:19:47 +01:00
Florian Festi 7c716a9e5f UnevenHeightBox: Make bottom edge parametric 2018-03-15 20:46:00 +01:00
Florian Festi 786ff222c2 New generator: UnevenHeightBox
Box with different height in each corner
2018-03-15 19:08:47 +01:00
Florian Festi 0604744284 OttoSoles: Add dove tail joints to the connecting edges 2018-03-11 17:43:55 +01:00
Florian Festi f2106a2c8c OttoSoles: Add support for tabs 2018-03-11 09:13:40 +01:00
Florian Festi 49ce2ed412 New generator: Ottosoles
Foam soles for the OttO Bot
2018-03-10 19:28:30 +01:00