Florian Festi
|
afbb8d11fd
|
Gear generator
|
2017-11-22 21:32:04 +01:00 |
Florian Festi
|
f77c19d839
|
Stachel: Clean up and move generator to Misc
|
2017-11-21 23:08:39 +01:00 |
Florian Festi
|
5a6bc71a7c
|
Stachel: replace absolute sizes with (internal) parameters
|
2017-11-21 22:39:57 +01:00 |
Florian Festi
|
941676d2b7
|
New generator: Stachel - an end pin for bass recorders
|
2017-11-21 22:39:57 +01:00 |
Florian Festi
|
08d7a026b1
|
NemaMount: Add finger holes to copy on another part
instead of using the base plate
|
2017-11-19 19:30:06 +01:00 |
Florian Festi
|
642212d2ce
|
New generator: NemaMount
|
2017-11-19 18:10:59 +01:00 |
Florian Festi
|
46c4960edc
|
New generator: Display
|
2017-11-18 18:28:13 +01:00 |
Florian Festi
|
45c73e57fb
|
New generator: EletronicsBox
Closed box with screw on top and mounting holes
|
2017-11-15 17:19:41 +01:00 |
Florian Festi
|
36c0ec48fe
|
TypeTray: Add closedtop parameter
Add a top wall turning the type tray into a closed box with multiple
compartments
|
2017-11-14 20:21:01 +01:00 |
Florian Festi
|
7793729688
|
New generator:LBeam
Simple Lbeam made of two wall joint with a right angle
|
2017-11-14 20:20:08 +01:00 |
Florian Festi
|
8d846df9d1
|
Add D holes to knobs
|
2017-11-07 23:39:50 +01:00 |
Marius Bergmann
|
c0325b52ac
|
template: Remove invalid parameter and whitespace
|
2017-11-03 22:54:06 +01:00 |
Florian Festi
|
dd2cedeb57
|
Knobs: Improve param descriptions
|
2017-10-01 21:13:29 +02:00 |
Florian Festi
|
dfcf3d65c8
|
New generator: ConcaveKnob in Parts
|
2017-10-01 20:34:19 +02:00 |
Florian Festi
|
647c5302b6
|
New generator: WaivyKnob
|
2017-10-01 20:20:36 +02:00 |
Florian Festi
|
9dbc8fd98b
|
Modernize _template.py
|
2017-09-16 21:30:41 +02:00 |
Florian Festi
|
f829ff2a82
|
PoleHook: Use screwhead param for knob
|
2017-09-16 21:30:41 +02:00 |
Florian Festi
|
b623008ea3
|
ClosedBox: fix (commented out) BedBolt support
|
2017-09-13 11:39:03 +02:00 |
Florian Festi
|
23a1da105e
|
WineRack: Remove debug code for checking number of walls needed.
|
2017-09-05 23:05:11 +02:00 |
Florian Festi
|
7453455512
|
WineRack: Make unnecessary walls optional
|
2017-09-05 23:00:54 +02:00 |
Florian Festi
|
0e7827f9a9
|
WineRack: Add front cover
|
2017-09-05 21:04:20 +02:00 |
Florian Festi
|
fbfb851474
|
New generator: WineRack
A honey comb like wine rack
|
2017-09-05 21:04:20 +02:00 |
Florian Festi
|
592fbe95c4
|
OttoLegs: Change ankles. Fix servo horn with a C-ring
Fixes issue with servo horns only being adjustable in steps of 18 degrees
This led to missaligned feet which resulted in loss of freedom of movement.
|
2017-08-19 22:14:30 +02:00 |
Florian Festi
|
6fecb9aa29
|
OttoBody: Move main switch to outer wall
Shorten servo holder so it no longer needs a hole for the switch
|
2017-08-19 19:31:54 +02:00 |
Florian Festi
|
398851255d
|
OttoLegs: Use servo horn for actuating the ankles
|
2017-08-12 00:07:34 +02:00 |
Florian Festi
|
4dd271df74
|
OttoLegs: Make ankle screw screwed into leg
to give more stability to the joint
|
2017-08-11 18:44:34 +02:00 |
Florian Festi
|
bb76a8bd7b
|
OttoLeg: Use partsMatrix to get multiple part
|
2017-08-11 17:46:50 +02:00 |
Florian Festi
|
09dd779cbd
|
OttLegs: Make hole for servo cable over whole width of the leg
|
2017-08-07 17:03:57 +02:00 |
Florian Festi
|
fafc1c01ef
|
OttoLegs: break ankles into separate paths
|
2017-08-03 23:19:32 +02:00 |
Florian Festi
|
e91f53b0fa
|
OttoLegs: Change design of ankles
|
2017-08-03 23:00:20 +02:00 |
Florian Festi
|
b4b6799721
|
OttoBody: Add hook to PCB Clip
|
2017-08-03 22:32:33 +02:00 |
Florian Festi
|
e3035da713
|
OttoBody: Move hole for push button
|
2017-08-01 21:19:01 +02:00 |
Florian Festi
|
2e9ac29d01
|
OttoLegs: Make length of legs configurable
|
2017-08-01 21:17:35 +02:00 |
Florian Festi
|
979b6ae936
|
OttoBody: Add push button
|
2017-07-31 21:18:06 +02:00 |
Florian Festi
|
a639c04de2
|
OttoBody: Clips for keeping the mouth shut
|
2017-07-31 21:08:26 +02:00 |
Florian Festi
|
31e3817f32
|
OttoBody: New PCB Clamps
|
2017-07-31 20:46:41 +02:00 |
Florian Festi
|
fd23c74e07
|
Otto Body: parts for mounting the PCB
|
2017-07-30 21:23:00 +02:00 |
Florian Festi
|
e26d17c840
|
AngledBox: Don't overwrite h param
Using h as temporary variable was overwriting the variable containing the
height of the box.
Fixes #41
|
2017-07-28 23:33:36 +02:00 |
Florian Festi
|
83a72552e2
|
Ottobot: Make hole for USB plug a bit smaller again
|
2017-07-25 22:43:11 +02:00 |
Florian Festi
|
c823cb78d6
|
OttoBot: Add Hole for on/off switch
|
2017-07-25 21:57:58 +02:00 |
Florian Festi
|
3876ea5ddd
|
Ottobot: Increase hole for USB plug
|
2017-07-23 21:29:14 +02:00 |
Florian Festi
|
074646fdec
|
_template.py tweaks
|
2017-05-20 20:41:51 +02:00 |
Florian Festi
|
82463317bb
|
Edges generator for printing the registerd Edge types
Not really a generator...
|
2017-05-20 20:41:51 +02:00 |
Florian Festi
|
ae619aabea
|
Flexbox4: Fix length of lid
to overlap the side wall
|
2017-04-11 21:09:41 +02:00 |
Florian Festi
|
7bbf82c958
|
UBox: Fix size of lid
|
2017-04-11 20:55:21 +02:00 |
Florian Festi
|
b63dcfeee6
|
Make Traylayout work without main function
|
2017-04-05 04:33:42 +02:00 |
Florian Festi
|
5b9c8e4d71
|
Remove main function from generators
Generators are no longer executable on their own. Use scripts/boxes
instead.
|
2017-04-05 04:33:42 +02:00 |
Florian Festi
|
f9c0cb8cab
|
Support putting class and instances into UI Groups
|
2017-04-02 02:31:37 +02:00 |
Florian Festi
|
8e65298c6b
|
Planetary2: Print gearing ratio and change default for sun gear
|
2017-04-01 23:54:44 +02:00 |
Florian Festi
|
12f2cbc1e2
|
Planetary2: Add allignment pins to sun gear
|
2017-04-01 21:18:48 +02:00 |
Florian Festi
|
273190932f
|
Planetary2: Order part the way they need to go together
|
2017-04-01 21:06:57 +02:00 |
Florian Festi
|
4c17d6a4a1
|
Planetary2: Put planet gears in the order they need to go together
|
2017-04-01 20:59:19 +02:00 |
Florian Festi
|
7f1e54be15
|
Planetary2: Add pin holes for ring gear and add second ring
|
2017-03-30 20:59:13 +02:00 |
Florian Festi
|
8487d5c379
|
Planetary2: New generator for a ~100 reduction to belt pulley
|
2017-03-29 07:44:48 +02:00 |
Florian Festi
|
bad114400f
|
Use better default for height of pulley (using the new keyword style)
|
2017-03-29 07:41:05 +02:00 |
Florian Festi
|
c2fa8c85cf
|
Pulley: Add insideout param
This allows using timing belts as strainwaves in harmonic drives.
|
2017-03-22 22:03:09 +01:00 |
Florian Festi
|
71bd013f3f
|
RegularBox: Better description
|
2017-03-13 11:41:12 +01:00 |
Florian Festi
|
cd0d49bf6f
|
OttoLegs: Use two different hole sizes for the ankle
to allow screwing it into one side while moving freely on the other
|
2017-03-12 14:47:21 +01:00 |
Florian Festi
|
cd3fee5e76
|
OttoLegs: More tweaks
Lengthen front by 1mm to close gap to servo
Lower ankle hole at leg by 0.5mm
Shorten internal wall holding the servo at top
|
2017-03-11 20:14:29 +01:00 |
Florian Festi
|
672295310b
|
OttoBody: Body for Otto LC
|
2017-03-11 18:22:41 +01:00 |
Florian Festi
|
c6c2e203f2
|
OttoLegs: Make ankle bolt diameter configurable
|
2017-03-11 18:22:41 +01:00 |
Florian Festi
|
271bed0308
|
OttoLegs: wall for better fixating the servos
|
2017-03-11 18:22:41 +01:00 |
Florian Festi
|
6bc695a418
|
OttoLegs: Add second leg
|
2017-03-11 18:22:41 +01:00 |
Florian Festi
|
e316877d06
|
OttoLegs: Make room for cables
|
2017-03-11 18:22:41 +01:00 |
Florian Festi
|
db4e878bb4
|
OttoLegs: Legs for Otto LC
|
2017-03-11 18:22:41 +01:00 |
Florian Festi
|
4ab1dcc323
|
RoundedBox: Fix description
|
2017-03-06 22:24:05 +01:00 |
Florian Festi
|
eecbceda11
|
Rename Box2 -> UniversalBox
|
2017-03-06 22:24:05 +01:00 |
Florian Festi
|
47f3037e23
|
rename Box3 -> OpenBox
|
2017-03-06 22:24:05 +01:00 |
Florian Festi
|
5026c2bc03
|
Rename Box5 -> HingeBox
|
2017-03-06 22:24:05 +01:00 |
Florian Festi
|
e5b19978dd
|
Rename Box4 -> IntegratedHingeBox
|
2017-03-06 22:24:05 +01:00 |
Florian Festi
|
75b7724255
|
Rename Box -> ClosedBox
|
2017-03-06 22:24:05 +01:00 |
Florian Festi
|
5e33d057fc
|
UBox: Limit radius to possible values and merge flex if radii touch
|
2017-03-04 15:29:28 +01:00 |
Florian Festi
|
cb8ebefeb1
|
Fix Servo.choices() and use it in robotarm
|
2017-02-25 19:59:16 +01:00 |
Florian Festi
|
174b20fc11
|
Fix main
|
2017-02-25 19:40:24 +01:00 |
Florian Festi
|
ce87babfdd
|
RoundedBox: Fix hole size
Size calculation was wrong but compensated the broken size adjustment with
"outside" set.
|
2017-02-25 15:52:51 +01:00 |
Florian Festi
|
490d089a83
|
Planetary: Python2 fix. // doesn't allow floats in Python 2
|
2017-02-25 11:24:58 +01:00 |
Florian Festi
|
1b3f9dbc3a
|
Robotarm: Generator for servo powered robot arm segments
|
2017-02-22 22:33:22 +01:00 |
Florian Festi
|
d2774f151d
|
Lamp: fix no longer valid default in setting
|
2017-02-18 19:13:57 +01:00 |
Florian Festi
|
cc577956a4
|
Flexbox3: Fix radius of lid
May still be off a bit. But I can't see why...
|
2017-02-18 19:06:10 +01:00 |
Florian Festi
|
117ace3233
|
FlexBox3: Fix finger joints of lid
|
2017-02-18 19:06:10 +01:00 |
Florian Festi
|
1f9342b678
|
Castle: Make available in UI and adjust to current code base
|
2017-02-18 19:06:10 +01:00 |
Florian Festi
|
561eb0034c
|
Add "Unstable" UIGroup
|
2017-02-15 15:55:01 +01:00 |
Florian Festi
|
d3c76f2b9e
|
Put box generator into groups and adjust the menu web page accordingly
|
2017-02-13 17:31:58 +01:00 |
Florian Festi
|
5a0f3d42ea
|
Add UIGroup class and instances for structuring the box generators
|
2017-02-13 17:31:02 +01:00 |
Florian Festi
|
c820c1b77d
|
Move lid code from boxes/generators/box2.py to boxes/lids.py
Rename the classes to no longer show up in the list of generators
|
2017-02-12 23:18:37 +01:00 |
Florian Festi
|
0739fd0b94
|
Exclude Boxes classes starting with _ in getAllBoxGenerators()
Exclude mix-in classes that are not supposed to be used on their own
|
2017-02-12 22:20:32 +01:00 |
Florian Festi
|
399e5b468f
|
New generator: UBox - a box with rounded corner at the bottom
|
2017-02-12 15:00:17 +01:00 |
Florian Festi
|
b59de950c0
|
Box2: Refactor lid generation out of the Box2 class
|
2017-02-12 15:00:17 +01:00 |
Florian Festi
|
a7d0dda9f8
|
New generator: Box5 box with lid attached with cabinet hinges
|
2017-02-11 18:15:44 +01:00 |
Florian Festi
|
305986dad8
|
Add cabinet hinge to top_edge and support it in Box2
|
2017-02-11 18:15:44 +01:00 |
Florian Festi
|
fb5398b30d
|
PoleHook: Initial commit
|
2017-02-11 18:15:34 +01:00 |
Florian Festi
|
250131e152
|
Fix previous fix *sigh*
|
2017-02-09 18:47:20 +01:00 |
Florian Festi
|
3e3ed3b0dd
|
Add finger joint settings again
Got removed accidentially in 8d754c
|
2017-02-09 00:02:41 +01:00 |
Florian Festi
|
da6dcb4c68
|
Box4: Use ignore_widths to get finger joints on the whole length of all edges
|
2017-02-07 20:18:48 +01:00 |
Florian Festi
|
1e6893d0b1
|
Box4: Box with boxy lid and built-in hinge
|
2017-02-06 22:36:11 +01:00 |
christopher
|
8d754c3855
|
Use default finger/width settings of 2.0 for every box
|
2017-01-30 10:12:27 +01:00 |
Florian Festi
|
17e2b55fcf
|
Box2: Add flat lid
Make chestlid param a general lid param
|
2017-01-24 22:49:25 +01:00 |
Florian Festi
|
28ad1c6dc3
|
RoundedBox: Add top param for top opening and lid
|
2017-01-21 13:54:58 +01:00 |
Florian Festi
|
a8241b2118
|
New generator: RoundedBox
Still very basic. Needs top parameter similar to AngledBox
|
2017-01-19 21:36:43 +01:00 |
Florian Festi
|
fa4fd943ca
|
New generator: DisplayShelf - a shelf with forward slanted floors
|
2017-01-14 23:13:22 +01:00 |