Commit Graph

336 Commits

Author SHA1 Message Date
Florian Festi 71bd013f3f RegularBox: Better description 2017-03-13 11:41:12 +01:00
Florian Festi cd0d49bf6f OttoLegs: Use two different hole sizes for the ankle
to allow screwing it into one side while moving freely on the other
2017-03-12 14:47:21 +01:00
Florian Festi cd3fee5e76 OttoLegs: More tweaks
Lengthen front by 1mm to close gap to servo
Lower ankle hole at leg by 0.5mm
Shorten internal wall holding the servo at top
2017-03-11 20:14:29 +01:00
Florian Festi 672295310b OttoBody: Body for Otto LC 2017-03-11 18:22:41 +01:00
Florian Festi c6c2e203f2 OttoLegs: Make ankle bolt diameter configurable 2017-03-11 18:22:41 +01:00
Florian Festi 271bed0308 OttoLegs: wall for better fixating the servos 2017-03-11 18:22:41 +01:00
Florian Festi 6bc695a418 OttoLegs: Add second leg 2017-03-11 18:22:41 +01:00
Florian Festi e316877d06 OttoLegs: Make room for cables 2017-03-11 18:22:41 +01:00
Florian Festi db4e878bb4 OttoLegs: Legs for Otto LC 2017-03-11 18:22:41 +01:00
Florian Festi 121e2107fb Import lxml locally to avoid hard dependency
The code is used in the Inkscape plugin only.
2017-03-10 23:00:41 +01:00
Florian Festi 4ab1dcc323 RoundedBox: Fix description 2017-03-06 22:24:05 +01:00
Florian Festi eecbceda11 Rename Box2 -> UniversalBox 2017-03-06 22:24:05 +01:00
Florian Festi 47f3037e23 rename Box3 -> OpenBox 2017-03-06 22:24:05 +01:00
Florian Festi 5026c2bc03 Rename Box5 -> HingeBox 2017-03-06 22:24:05 +01:00
Florian Festi e5b19978dd Rename Box4 -> IntegratedHingeBox 2017-03-06 22:24:05 +01:00
Florian Festi 75b7724255 Rename Box -> ClosedBox 2017-03-06 22:24:05 +01:00
Florian Festi 5956182328 Parts.ringSegment() 2017-03-05 12:52:44 +01:00
Florian Festi 5e33d057fc UBox: Limit radius to possible values and merge flex if radii touch 2017-03-04 15:29:28 +01:00
Florian Festi a0d992f43a Stop printing random stuff on stdout 2017-02-26 17:02:16 +01:00
Florian Festi 41bc4d028f Use sys.stdout.buffer to be able to write bytes (for Python 3 compat) 2017-02-25 19:59:53 +01:00
Florian Festi cb8ebefeb1 Fix Servo.choices() and use it in robotarm 2017-02-25 19:59:16 +01:00
Florian Festi 174b20fc11 Fix main 2017-02-25 19:40:24 +01:00
Florian Festi a81ba48d45 Take viewBox and size of SVG documents into account when merging them 2017-02-25 16:10:28 +01:00
Florian Festi ce87babfdd RoundedBox: Fix hole size
Size calculation was wrong but compensated the broken size adjustment with
"outside" set.
2017-02-25 15:52:51 +01:00
Florian Festi 490d089a83 Planetary: Python2 fix. // doesn't allow floats in Python 2 2017-02-25 11:24:58 +01:00
Florian Festi d4edafe2d9 Fix ChestHingeSetting
Got broken by 6756d16b67
2017-02-23 20:57:01 +01:00
Florian Festi e0a4d06c43 Hackish way to make scriptsboxes to work with Inkscape. 2017-02-23 17:38:26 +01:00
Florian Festi ff7ee22885 Add svgutil.svgMerge() allwing to add generated box into anoterh svg
Implemetation has still many short comings. E.g. assumes units and layout of
document passed in. Also assumes to be merged document to be generated by
boxes.py.
2017-02-23 17:38:26 +01:00
Florian Festi 39e74e67ba Add scripts/boxes2inkscape for generating inx files from box generators
Code for handling traylayout still missing.
2017-02-23 17:38:26 +01:00
Florian Festi a93e280477 Make reference a separate path object
Avoid it being merged with teh first par tof the drawing
2017-02-23 17:38:26 +01:00
Florian Festi e23d8034c5 Make BoolArg accept upper and lower case values 2017-02-23 17:38:26 +01:00
Florian Festi b440d1c767 Use BoolArg when creating arg parser for edges.Settings 2017-02-23 17:38:26 +01:00
Florian Festi 1b3f9dbc3a Robotarm: Generator for servo powered robot arm segments 2017-02-22 22:33:22 +01:00
Florian Festi 40d53ac1ba Robot parts: Initial commit 2017-02-22 22:33:22 +01:00
Florian Festi 1bed3f2a39 rectangularWall() fix positioning with ignore_widths
containing parts of the lower left corner.
2017-02-22 20:01:29 +01:00
Florian Festi 3cad4f27af Add tangent() function 2017-02-22 20:01:28 +01:00
Florian Festi d2774f151d Lamp: fix no longer valid default in setting 2017-02-18 19:13:57 +01:00
Florian Festi cc577956a4 Flexbox3: Fix radius of lid
May still be off a bit. But I can't see why...
2017-02-18 19:06:10 +01:00
Florian Festi 117ace3233 FlexBox3: Fix finger joints of lid 2017-02-18 19:06:10 +01:00
Florian Festi 1f9342b678 Castle: Make available in UI and adjust to current code base 2017-02-18 19:06:10 +01:00
Florian Festi 6756d16b67 Use .settings.thickness in edges instead of global value 2017-02-18 19:05:21 +01:00
Florian Festi 561eb0034c Add "Unstable" UIGroup 2017-02-15 15:55:01 +01:00
Florian Festi d3c76f2b9e Put box generator into groups and adjust the menu web page accordingly 2017-02-13 17:31:58 +01:00
Florian Festi 5a0f3d42ea Add UIGroup class and instances for structuring the box generators 2017-02-13 17:31:02 +01:00
Florian Festi c820c1b77d Move lid code from boxes/generators/box2.py to boxes/lids.py
Rename the classes to no longer show up in the list of generators
2017-02-12 23:18:37 +01:00
Florian Festi 0739fd0b94 Exclude Boxes classes starting with _ in getAllBoxGenerators()
Exclude mix-in classes that are not supposed to be used on their own
2017-02-12 22:20:32 +01:00
Florian Festi 399e5b468f New generator: UBox - a box with rounded corner at the bottom 2017-02-12 15:00:17 +01:00
Florian Festi b59de950c0 Box2: Refactor lid generation out of the Box2 class 2017-02-12 15:00:17 +01:00
Florian Festi dd6c5560f9 Support chars es edge parameters in Boxes.edgeCorner() 2017-02-12 15:00:17 +01:00
Florian Festi a7d0dda9f8 New generator: Box5 box with lid attached with cabinet hinges 2017-02-11 18:15:44 +01:00
Florian Festi 305986dad8 Add cabinet hinge to top_edge and support it in Box2 2017-02-11 18:15:44 +01:00
Florian Festi 94c727cc30 Add CabinetHingeEdge 2017-02-11 18:15:44 +01:00
Florian Festi fb5398b30d PoleHook: Initial commit 2017-02-11 18:15:34 +01:00
Florian Festi f1b8d68d65 Fix bedbolts for finger holes 2017-02-11 18:15:34 +01:00
Florian Festi 250131e152 Fix previous fix *sigh* 2017-02-09 18:47:20 +01:00
Florian Festi 3e3ed3b0dd Add finger joint settings again
Got removed accidentially in 8d754c
2017-02-09 00:02:41 +01:00
Florian Festi da6dcb4c68 Box4: Use ignore_widths to get finger joints on the whole length of all edges 2017-02-07 20:18:48 +01:00
Florian Festi 3daa9a846a Add ignore_widths param for rectangularWall()
It does not pass the width of edges to edgeCorner but instead lengthen the
neighboring edge. The widths are numbered from 0 to 7 starting with the
horizontal part of the lower right corner.
2017-02-07 18:56:07 +01:00
Florian Festi 1e6893d0b1 Box4: Box with boxy lid and built-in hinge 2017-02-06 22:36:11 +01:00
Florian Festi 544c40a0d3 Add Chest Hinge edge classes 2017-02-06 22:35:26 +01:00
Florian Festi 70574056d6 Fixes for rectangularTriangle 2017-02-05 21:02:46 +01:00
Florian Festi 2fa07190ff Fix finger joint setting defaults
space and width got mixed up in 8d754c3855
2017-02-05 16:30:37 +01:00
Florian Festi f982918205 Add r param to rectangularTriangle() 2017-02-04 15:01:16 +01:00
Florian Festi 07661b1eae Formats: Generate tempfile in same directory to ensure rename works. 2017-02-04 15:01:16 +01:00
christopher 8d754c3855 Use default finger/width settings of 2.0 for every box 2017-01-30 10:12:27 +01:00
christopher c36d819e10 Change defaults 2017-01-30 09:37:10 +01:00
Florian Festi 17e2b55fcf Box2: Add flat lid
Make chestlid param a general lid param
2017-01-24 22:49:25 +01:00
Florian Festi 28ad1c6dc3 RoundedBox: Add top param for top opening and lid 2017-01-21 13:54:58 +01:00
Florian Festi 6ef950816e Add edge parameter to Boxes.roundedPlate 2017-01-21 13:54:58 +01:00
Florian Festi a8241b2118 New generator: RoundedBox
Still very basic. Needs top parameter similar to AngledBox
2017-01-19 21:36:43 +01:00
Florian Festi fa4fd943ca New generator: DisplayShelf - a shelf with forward slanted floors 2017-01-14 23:13:22 +01:00
Florian Festi 8514ede2c3 AngledBox: Fix fingers on top of walls for "angled hole" 2017-01-08 18:56:05 +01:00
Florian Festi 7b5614659a New generator: AngledBox 2017-01-08 17:25:36 +01:00
Florian Festi 8dc13440ee Fix boolean params. Not passing 0, None, False or off works for setting them to False
Thanks to chrisjshull for pointing out how to fix this in the web UI.
Fixes #19
2017-01-08 17:25:36 +01:00
Florian Festi 13cdb35954 Make RegularPolygonWall a path of its own 2016-12-17 11:37:11 +01:00
Florian Festi 0cbd713718 RegularBox: Fix outside parameter 2016-12-17 11:36:26 +01:00
Florian Festi 0dc6aef5d4 RegularBox: Add angled hole top style 2016-12-17 11:24:47 +01:00
Florian Festi b2b0ccd6f1 Fix FingerJoints with angles != 90 degrees
Fix margins
Fix amount of recess for spaces
2016-12-14 22:07:36 +01:00
Florian Festi 6298c80527 RegularBox: Fix angled lid 2016-12-14 21:02:49 +01:00
Florian Festi a5fd1775e0 New generator: RegularBox 2016-12-13 22:58:56 +01:00
Florian Festi cbe32cc5a7 Code for Regular Polygons
* Boxes.regularPolygon for calculation
 * Boxes.regularPolygonAt for simple polygon
 * Boxes.regularPolygonWall

Also fix edgeCorner() for angles != 90 degrees
2016-12-13 22:58:10 +01:00
Florian Festi 75adf0b15f TrafficLight: Add support for horizontal layout of lights 2016-11-30 21:45:17 +01:00
Florian Festi f133e2aa12 TrafficLight: Add windows to be cut from transparent (and colored) material 2016-11-30 18:31:44 +01:00
Florian Festi 16e93ca086 TrafficLight: Fix edge type for front panels 2016-11-30 11:29:55 +01:00
Florian Festi 23cf0eaa3a TrafficLight: Add param for number of lights 2016-11-29 23:43:01 +01:00
Florian Festi 273174fae8 New generator: TrafficLight 2016-11-29 23:42:17 +01:00
Florian Festi aa4c0fd1d4 Add FingerJoints to the bottom of the front plates 2016-11-28 21:11:38 +01:00
Florian Festi be6de6a793 Support FingerJoints with less than 90 degrees.
This means bending angle < 90. The actual angle is bigger than 90
2016-11-28 21:11:38 +01:00
Florian Festi 6f0a4cae86 Use polyline() for FingerJointEdge 2016-11-28 21:11:38 +01:00
Florian Festi aa5fa73c8a Add edgeObjects() method to Settings to create Edge objects 2016-11-28 21:11:38 +01:00
Florian Festi f30221d265 Fix .margin() for CompondEdge 2016-11-26 13:40:27 +01:00
Florian Festi a0be85764a Use FingerJointSettings.height as margin of Finger Joints 2016-11-17 21:39:32 +01:00
Florian Festi 0fc6527150 BinTray: Switch slots between vertical and horizontal walls
to better support the floors.

Also fix margin of BinFront edge class(es)
2016-11-13 11:58:07 +01:00
Florian Festi c39b33ad14 New BinTray generator 2016-11-13 00:40:55 +01:00
Florian Festi 69ac52aaab Slide-on Edge: Add optional springs that hold the lid in place
Fix pin length to two thicknesses
2016-11-12 17:50:29 +01:00
Florian Festi 43c0178d14 Make fingers for slide-on lid bigger by defaut 2016-11-12 17:01:44 +01:00
Florian Festi a8af428941 Manually use multiple arcs to get more precise curves 2016-11-02 21:50:44 +01:00
Florian Festi fe79970cc3 Beautify web UI
Watch self.css
2016-11-01 23:46:25 +01:00
Florian Festi 0cde4a71e6 Add params for edge settings to all generators 2016-11-01 23:46:25 +01:00
Florian Festi 7baafebaea Remove debug print 2016-11-01 23:46:25 +01:00