Florian Festi
ef94daa006
Add mouseover images for most groups
...
Resolves : #253
2021-06-05 18:25:53 +02:00
jens persson
9a46882c8f
Add color selection to all holes
...
All methods that uses the holeCol decorator now take a parameter color.
Added semantic symbols for colors.
2021-06-03 21:40:11 +02:00
jens persson
c86ae75712
Parametrizise the drillbox
2021-06-03 21:40:11 +02:00
Florian Festi
22a50a6181
PhoneHolder: Fix edge of second side being reversed
...
The code switched sides for each edges draen reversed. Change that to
only reverse local variables and leave the edge objects unchanged.
Thanks to https://github.com/ChrisLaserman for reporting!
Resolves : #324
2021-05-31 17:04:17 +02:00
Florian Festi
be7115007d
SlatwallPinRow: Make it actually work
...
Remove finger joints from pinplate as there are not matching holes.
Move finger holes on back plate to right place.
2021-05-24 22:16:59 +02:00
Florian Festi
bdcad5ee27
New generator: SlattwallStairs
...
Renders a stair like structure that can house tools like screw drivers
if the proper holes or slots are added.
2021-05-23 13:00:52 +02:00
Florian Festi
538d5af99b
New generator: DoubleFlexDoorBox
...
Still untested and missing a sample image
2021-05-22 14:10:16 +02:00
Norbert Szulc
b0861bf937
Add platonic solid generator
...
Resolves : #254
2021-05-16 15:07:53 +02:00
jens persson
3a979bcfc6
Extend PaintStorage to make stackable drawers
...
Add an extra argument --drawer that changes it to a simple drawer
Co-authored-by: Florian Festi<florian@festi.info>
Resolves : #315
2021-05-16 14:58:18 +02:00
Florian Festi
eec53625f7
New generator: SlatwalPinRow
...
Angled pins to hang stuff from.
Still untested.
2021-05-15 15:45:44 +02:00
Florian Festi
072ff9b032
New generator: DrillStand
...
A stand-alone (no pun intended) version of the SlatwallDrillBox
2021-05-15 15:45:25 +02:00
Guillaume Collic
d478edd5d7
Add coffee capsule holder generator
2021-04-25 11:25:30 +02:00
Florian Festi
41165731c9
DisplayShelf: Fix calculations for negative angle values
2021-04-02 16:11:11 +02:00
Guillaume Collic
97d85ff10e
Add PhoneHolder
2021-03-22 22:45:55 +01:00
Mateusz Konieczny
3a3304de67
mention similar ones in burn test
2021-03-22 19:45:06 +01:00
Mateusz Konieczny
69bf15a682
serraded -> serrated typo
2021-03-22 19:41:33 +01:00
Mateusz Konieczny
9bdd5e4dda
mentioned ClosedBox and BasedBox in each other descriptions
2021-03-20 21:26:54 +01:00
Mateusz Konieczny
23ee7b3eb2
copy closedbox description to basedbox description as applicable
2021-03-20 21:26:54 +01:00
Mateusz Konieczny
000ba92106
fix typo in description
2021-03-20 21:26:54 +01:00
Mateusz Konieczny
e8fc07d33d
increase play in two piece to 0.15
...
note: I am very inexperienced, this is based on a single test (with 0.05 and 0.15 box) and advice from local expert
both apply to plywood
2021-03-17 15:24:46 +01:00
Florian Festi
7355d0d612
TrayLayout: Give more descriptive parse errors
...
Also allow both X and now also x for removed floor
2021-03-15 13:50:35 +01:00
Florian Festi
7397e49b2b
TrayLayout: Add description text
...
Resolves : #295
2021-03-15 13:50:35 +01:00
Mateusz Konieczny
21ca3d0b98
try to add explanation how burn test works
...
fixes #288
2021-03-02 14:12:42 +01:00
Guillaume Collic
3efd941ff1
Keyboard: 19.05 mm spacing is more standard than 19
2021-02-27 21:02:07 +01:00
Guillaume Collic
72c7fca53e
Keyboard: clean and column callback spacing default value
2021-02-27 21:02:07 +01:00
Guillaume Collic
61b85a6aed
Keyboard: add shared settings with new options
2021-02-27 21:02:07 +01:00
Guillaume Collic
0c89ad2b17
Keyboard: fix alignment in atreus21 and keypad
2021-02-27 21:02:07 +01:00
Guillaume Collic
0d4d4f308b
Keyboard: move common code to mixin (atreus21, keypad)
2021-02-27 21:02:07 +01:00
Guillaume Collic
ec8abee265
Atreus21: clean dead code and magic numbers
2021-02-27 21:02:07 +01:00
Mateusz Konieczny
44a9041427
attempt to make burn test description more newbieproof
...
fixes #284
2021-02-27 20:56:03 +01:00
Mateusz Konieczny
33917a6113
fix typo
2021-02-24 21:03:52 +01:00
Guillaume Collic
d694bd3241
Fix DividerTray length with 'outside=false'
2021-02-14 10:20:16 +01:00
Guillaume Collic
9642b9aacc
Add PaperBox
2021-01-28 13:59:47 +01:00
jomjol
eea27ee74d
Implementation of FlexSettings
...
Addding of FlexSettings to RoundedBox to adjust the flexibility setting for the corners
2020-12-29 22:29:27 +01:00
Florian Festi
e6dccc4135
StorageRack: Add pictures
...
Thanks to https://github.com/impellerturn for providing the images!
2020-12-29 15:33:27 +01:00
Florian Festi
34260e1b01
Castle: Actually add description
2020-12-29 15:18:37 +01:00
Guillaume Collic
b41a3114ca
AgricolaInsert: better thickness range support
2020-11-16 22:46:43 +01:00
Florian Festi
7afe0329a2
MakitaPowerSupply: Dynamically calculate vent holes
2020-11-10 18:00:40 +01:00
Florian Festi
043f208213
AllEdges: Fix for new backend
2020-11-09 19:15:55 +01:00
Florian Festi
09b4de82de
MakitaPowerSuppy: Replace hyphens parameter names
2020-11-09 19:15:55 +01:00
Florian Festi
cdc89e3cde
SilverwareBox: Add missing stroke() command
2020-10-20 17:00:15 +02:00
Florian Festi
90c783568f
OttoBody: Fix issue with HexHoles that broke the generator
...
Thanks to https://github.com/ottobot42 for reporting.
Resolves : #250
2020-10-19 21:00:38 +02:00
Florian Festi
dabab1880f
SpicesRack: Fix feet to support first level
2020-10-13 22:49:19 +02:00
Florian Festi
1dd567657e
Fix use of roundedPlate in Display and LaserClamp
...
Thanks to Guillaume Collic (https://github.com/gcollic ) for reporting!
Resolves : #248
2020-10-13 20:00:09 +02:00
Florian Festi
6dff8db710
Add alignment pins to BayonetBox
...
Also add a lower ring to the bayonet lid of the RegularBox limiting rotation
2020-10-13 16:07:31 +02:00
Florian Festi
f74e86c38f
BasedBox: Add description and point people to edge_width
2020-10-11 14:01:03 +02:00
Marcin Zukowski
dfc2f075d9
Adding Grooved Edge (z, Z), example use in UnevenHeightBox
2020-09-29 20:40:18 +02:00
Guillaume Collic
2a55183e50
AgricolaInsert: optimize player box generation layout
2020-09-20 12:37:29 +02:00
Guillaume Collic
9e83c2ad9b
Add AgricolaInsert box
2020-09-20 12:37:29 +02:00
Guillaume Collic
7495de72f7
DividerTray: refactor, and makes it easier to reuse
2020-09-20 12:37:29 +02:00
Florian Festi
7fd4306664
Add h edge to top_edge parameter
...
Resolves : #244
2020-09-19 22:39:30 +02:00
Marcin Zukowski
f058ce68fb
Add --lid_height in UnevenHeightBox
2020-08-28 10:35:10 +02:00
Ba-So
d34d6ed987
fixed proper use of settings in paintbox.py
2020-08-15 09:47:40 +02:00
Ba-So
f6e2773810
fixed bug where the option hexpattern=True would cause an error.
2020-08-14 12:30:21 +02:00
Florian Festi
0980270dcf
RectangularWall: Fix list of available edge types
...
M -> N
2020-08-04 23:41:08 +02:00
Florian Festi
d3fa5ec0d4
UniversalBox: Add vertical_edges parameter
...
to allow finger hole joints for more stability
Fixes: whining by wu
2020-08-04 21:52:25 +02:00
Florian Festi
efe87c3e2e
TwoPiece: Add hi parameter to allow for lower inner wall
2020-08-04 19:33:11 +02:00
Florian Festi
9bbca5419f
New generator: NemaPattern
2020-08-04 19:33:11 +02:00
Florian Festi
4d2db03dc4
New generator: FanHole
2020-08-04 19:33:11 +02:00
Florian Festi
b8432e93af
New generator HexHoles
2020-08-04 19:33:11 +02:00
Florian Festi
415b133822
Add new Hole Patterns group
2020-08-04 19:33:10 +02:00
Florian Festi
3dc5aa997c
Console: Fix for front_height == 0
...
Thanks to dougw (https://hackaday.io/hacker/885177-dougw ) for pointing
this out!
2020-07-23 16:19:56 +02:00
Florian Festi
262d7804a4
Console and Console2: Add outside parameter
...
Also rename hi param to front_height in Console
2020-07-23 16:13:59 +02:00
Florian Festi
402c04568e
DividerTray: Add Finger Joint Settings
...
Thanks to John Hildebrand https://hackaday.io/hacker/528106-john-hildebrand
for jointing out that they were missing!
2020-07-09 00:22:13 +02:00
Florian Festi
2575cc39df
Add support for a bayonet mount lid to the RegularBox
...
Adjust BayonetBox to make the pieces usable from outside
2020-06-23 21:47:08 +02:00
Florian Festi
604ea923af
New generator: BasedBox
2020-06-22 19:57:18 +02:00
Florian Festi
ea0c9480e1
TriangleLamp: Fix hole position in front
2020-06-16 22:56:01 +02:00
Florian Festi
cd884c63bf
AngledBox: Add bottom_edge parameter
...
Also fix bug with non matching finger joints between side walls and
miss alignment of the bottom and top pieces
2020-06-03 21:56:55 +02:00
Florian Festi
ecaba08aa6
New generator: DinRailBox
2020-05-29 22:59:15 +02:00
Florian Festi
c5a35bd3ec
CardBox: Fix typo
2020-05-27 17:27:23 +02:00
Florian Festi
baf996764c
CardBox: Add building instructions
...
including a new picture of lid details by https://github.com/bwente
2020-05-26 18:07:17 +02:00
Stefan Schwarz
c065e154be
Generator for a split Atreus keyboard
2020-05-23 23:28:35 +02:00
Florian Festi
c978266906
DividerTray: Fix bottom edge for middle walls
2020-05-22 10:25:55 +02:00
Florian Festi
89805b4804
New generator: SideDoorHousing
2020-05-12 21:54:59 +02:00
Florian Festi
6091cf955f
Comsole2: Move to Box group in the UI
2020-05-10 16:13:54 +02:00
Florian Festi
928be1620b
UniversalBox: Change default for outset to True
...
for edge with hinge eye (i) top_edge
2020-05-05 22:03:20 +02:00
Florian Festi
1f2d35082d
Console2: Properly name front_height parameter
2020-05-05 18:28:52 +02:00
Florian Festi
0acc9c2a38
Console2: Move back wall latch down
...
to reduce chance of it conflicting with the front panel
2020-05-05 18:13:03 +02:00
Florian Festi
05a7e02486
Console2: Images, descriptions and parameters for hatches
...
Add three new parameters: removable_backwall, removable_panel and glued_panel
that control which of the service hatches are present and how to attach
the front panel
2020-05-05 09:44:07 +02:00
Florian Festi
93273f2fc7
Console2: Improve and fix latches
2020-05-02 18:42:36 +02:00
Florian Festi
e2d716aeb8
Console2: Fix bottom edge for front and back
2020-05-01 23:49:05 +02:00
Florian Festi
d45ccba307
New generator: Console2
2020-05-01 23:36:44 +02:00
Florian Festi
54d4b6bebd
Console: Fix x, y confusion
2020-04-29 12:25:46 +02:00
Florian Festi
279b60abc8
New generator: Console
2020-04-28 22:25:47 +02:00
Stefan Schwarz
2f2256ec7d
Keypad support for CPG151101S11 hotplug sockets
2020-04-13 20:11:44 +02:00
Florian Festi
f961cd533d
KeyPad: Improve parameter descriptions
2020-04-13 13:53:38 +02:00
Florian Festi
195c68c28f
Rail holes dist ( #213 )
...
* added EurorackSkiff Generator
* fixed holes distribution
2020-03-05 23:09:03 +01:00
Stefan Schwarz
3a14e1796b
Generator for keypads with mechanical switches
2020-03-04 20:24:47 +01:00
Florian Festi
80edaf5ac4
New generator: BottleStack
2020-02-29 18:19:59 +01:00
Florian Festi
4c338e1c62
RoundedBox: Add edge_style parameter
2020-02-28 17:52:57 +01:00
Erwin Jansen
a0338a559f
Add a bottom to the divider tray.
...
This add support for the generation of a bottom for the divider tray.
The bottom can be generated by passing the --bottom=True flag.
This makes it possible to generate ./static/samples/DividerTray.jpg
2020-02-26 21:00:26 +01:00
Florian Festi
eeb1baf352
Gear: don't allow less than 2 teeth
2020-02-01 15:30:53 +01:00
Florian Festi
ec9d911142
DividerTray: Use ValueError instead of assert to treat this as wrong user input
2020-02-01 15:17:18 +01:00
Florian Festi
069dd853aa
BinTray: limit front parameter
2020-02-01 15:14:12 +01:00
Florian Festi
2121228036
TrayLayout: Error out if tray is just a single wall
2020-02-01 14:51:38 +01:00
Florian Festi
2a7e1e62d1
PaintStorage: Prevent division by zero
2020-02-01 14:31:24 +01:00
Stefan Reichhard
37bff9d358
fixed d3 diameter (mounting screw holes)
2020-01-22 16:11:18 +01:00
Florian Festi
1f3110c6fa
New generator: TriangleLamp
2020-01-21 21:34:02 +01:00
Florian Festi
e2b87af2a4
UniversalBox: Add outside parameter
...
Fixes : #144
2019-12-14 19:13:40 +01:00
Florian Festi
aba9631b00
Make joints of box sides go to the very bottom
...
for NotesHolder, TypeTray and UniversalBox.
The same should be done to many other boxes as soon as they get the
bottom_edge parameter
Resolves : #111
2019-12-14 14:18:38 +01:00
Florian Festi
c5474e7488
DiscRack: Limit lower_factor and rear_factor to smaller than one
2019-12-14 12:23:08 +01:00
Florian Festi
024b574763
TrayLayout: Add default for layout param
2019-12-14 12:14:24 +01:00
Florian Festi
093e10a3ac
AngledBox: Use FingerJointSettings for vertical edges, too
2019-12-06 23:37:22 +01:00
Florian Festi
bd1db150c7
New geneator: SpicesRack
2019-11-29 19:58:27 +01:00
Marius Bergmann
9f8b84b3f1
add parameters for banana socket and flipswitch diameters
2019-11-20 11:57:13 +01:00
Marius Bergmann
2c367562a9
remove commented code
2019-11-20 11:57:13 +01:00
Marius Bergmann
90fdf897a9
formatting: whitespace cleanup
2019-11-20 11:57:13 +01:00
Florian Festi
c67d1f874c
StorageShelf: Add retainer_hole_edge param
...
to allow strengthening the retainer walls by using an h edge.
Also use a h edge on the bottom retainer wall if selected as bottom_edge.
2019-11-09 23:32:12 +01:00
Florian Festi
e8cda89381
StorageShelf: Fix holes for inner vertical walls
2019-11-09 23:31:26 +01:00
Florian Festi
71711baa1a
StorageShelf: Add retainer wall
...
This patch does not add finger joints to the vertical walls to attach the
retainer walls as the walls are likely to be to small to be able to make use
of them. In hte long run they should be added, though.
2019-11-09 17:10:23 +01:00
Florian Festi
0cdc930459
StorageShelf: Change front edge from E to e
...
This makes the shelf one thickness less deep - as it should be
2019-11-09 16:10:30 +01:00
Florian Festi
923798beb9
SBCMicroRack: Fix dowel diameter
2019-11-07 15:38:16 +01:00
Florian Festi
2860a32360
SBCMicroRack: Comment out unfinished fan parameter
2019-11-07 15:38:16 +01:00
Florian Festi
d9c190073b
SBCMicroRack: Don't draw bottom fingerholes twice
2019-11-07 15:38:16 +01:00
Florian Festi
af6c9be8f7
SBCMicroRack: Rearrange parts
2019-11-07 15:38:16 +01:00
gmorell
569eb2f49c
New generator: SBCMicroRack
2019-11-07 15:37:57 +01:00
Florian Festi
4ac46840d2
NotesHolder: Fix various issues
...
Code for opening == 0.0 was broken (See #187 )
Fixed placement of bottom
Fixed margin of USlotEdge
Resolves : #187
2019-11-04 08:52:26 +01:00
Florian Festi
927f483c19
New generator: LaserHoldfast - A holdfast for honey comb tables
2019-10-19 23:47:44 +02:00
Florian Festi
e2cb90db89
NotesHolder: Split front into two pieces and set better default values
...
Resolves : #129
2019-10-19 21:49:43 +02:00
Florian Festi
011024f0a4
TrayLayout: Add comment to clarify the purpose of the classes
...
Resolves : #179
2019-10-18 19:06:07 +02:00
Florian Festi
228335a993
BurnTest: fix part placement
2019-10-13 18:42:40 +02:00
Florian Festi
89ea774a39
New generator: BurnTest
2019-10-13 18:39:06 +02:00
Florian Festi
f5ed90ca88
SlatwallWrenchHolder: Add extra_distance parameter for Jonas
2019-10-10 20:00:22 +02:00
Florian Festi
8afdfdf3f5
New generator: BaynonetBox
2019-09-23 23:44:02 +02:00
Florian Festi
877915eb74
Arcade: Make height of monitor and depth of keyboard adjustable
...
Resolves : #166
2019-09-23 21:42:57 +02:00
Florian Festi
d6495fc7b4
DrillBox: Fix font size
...
Now that the text() function has a fontsize parameter, setting the font size
on ctx before calling text() has no impact.
Resolves : #173
Thanks to Marko Luther for reporting and suggesting this fix!
2019-09-23 12:15:49 +02:00
Florian Festi
3ba90c517c
TrayLayout: Fix cli
...
TrayLayout was still trying to produce a drawing and failed. Now TrayLayout is
not using most of the infrastructure and only TrayLayout2 has the capacity to
create a drawing.
Resolves : #172
2019-09-22 22:37:33 +02:00
Florian Festi
b124c96c63
UnevenHeightBox: Use lid and bottom_egde for height calculation
...
when "outside" is set
2019-09-08 23:26:23 +02:00
Florian Festi
657b978aa0
StorageShelf: Use top and bottom_egde for height calculation with "outside" set
2019-09-08 23:26:23 +02:00
Florian Festi
605692f751
StorageRack: Use top and bottom_egde for height calculation with "outside" set
2019-09-08 23:26:23 +02:00
Florian Festi
5c0cc4d732
SlatwallTypeTray: Remove unused code carried over from TypeTray
2019-09-08 23:26:23 +02:00
Florian Festi
2b0bdde145
SlatwallTypeTray: Adjust height according to bottom_edge if outside selected
2019-09-08 23:26:23 +02:00
Guillaume Collic
6c9d23af6e
New generator DividerTray
2019-08-30 21:00:32 +02:00
Florian Festi
c3185f5129
Rename to Rack19HalfWidth to better fit with other Rack boxes
...
Move to Box group
Support more than one row of equipement
Move defaults to arguments to conform with general coding style
2019-08-30 12:27:13 +02:00
Stefan Schwarz
681ebbb694
add h19rack for a ported half 19inch rackmount
2019-08-30 11:58:21 +02:00
Florian Festi
c81d23e605
SlatwallDrillBox: Fix all kind of errors
2019-08-15 23:12:35 +02:00
Florian Festi
e4bdc190bb
Flexbox3: Fix lid length
2019-08-08 22:53:08 +02:00
Florian Festi
6a3a9b984a
SlatwallTypetray: Fix side joints of front wall (F -> f)
2019-07-31 23:40:06 +02:00
Florian Festi
a38254667c
Remove no longer needed line in _template.py
2019-07-18 20:55:07 +02:00
Florian Festi
17d7cd80ab
Don't show generators in modules starting with underscore (templates)
2019-07-12 00:47:09 +02:00
Florian Festi
11174f2ecc
New generator SlatwallDrillBox
2019-07-12 00:43:06 +02:00
Florian Festi
88e99a5726
New generator: FlexBox5
...
Resolves #147
2019-07-12 00:24:50 +02:00
Florian Festi
e6f431ab15
New generator: MakitaPowerSupply
2019-07-07 16:26:29 +02:00
Florian Festi
a19debf1bd
Rename remaining Slatwall generators from Sw* to Slatwall*
2019-07-04 22:59:32 +02:00
Florian Festi
573b630adc
New generator: SlatwallPlaneHolder
2019-07-04 22:39:34 +02:00
Florian Festi
abdab6866a
New generator: StorageRack - Box with rails to slide other boxes in
2019-06-30 20:53:42 +02:00
Florian Festi
2f7603b4b4
New generator: SlatWallWrenchHolder
2019-06-30 20:53:42 +02:00
Florian Festi
0105957c05
New generator: SlatWallChiselHolder
2019-06-30 17:19:02 +02:00
Florian Festi
138dffbf2a
New generator: SlatWallCaliperHolder
2019-06-30 15:48:09 +02:00
Florian Festi
be8aed394a
New generator: Slatwall PlaneHolder
2019-06-30 15:18:11 +02:00
Florian Festi
09df973d69
New generator: SlatwallConsole - an outset and angled plate to mount stuff to
2019-06-22 00:07:23 +02:00
Florian Festi
810c3dbe3e
New generator: SwTypeTray - a tray to hang at a slat wall
2019-06-22 00:05:57 +02:00
Florian Festi
f1ce996aae
New generator: SwPliersHolder - a bar to hang pliers on
2019-06-22 00:04:30 +02:00
Florian Festi
6a809e17e7
Move trapezoidWall() from UnevenHeightBox to Boxes class
2019-06-21 21:37:57 +02:00
Florian Festi
1e35a3b9ed
New generator: SwSlottedHolder
...
A tool holder for slat wall
2019-06-21 21:22:10 +02:00
Florian Festi
5cef906a9a
Add SlatWallHoleEdge (dD) classes
...
Similar to FigerHolesEdge (h)
2019-06-21 18:47:29 +02:00
Florian Festi
9415a6864f
Add boxes/generators/_swtemplate.py as a starting point for Slat Wall boxes
2019-06-13 19:02:02 +02:00
Florian Festi
aadf5ceafc
Add Edge types, example and UIGroup for slat wall compatible boxes
2019-06-13 19:00:32 +02:00
chrysn
753422fa46
New generator DiscRack
...
A rack for storing disk-shaped objects vertically next to each other
2019-06-01 13:09:01 +02:00
Germain Lemasson
e8e248994b
Add a StorageSelf generator. This is a shelf for storing TypeTray boxes.
...
It is based on TypeTray generator. The sh parameter replace the sx parameter.
It is not a subclasse of TypeTray in order to have the top and bottom at
the right place.
2019-06-01 12:52:34 +02:00
Florian Festi
a6ca723759
Mirror holes on the other walls
...
to have them match up. Otherwise boxes with non symetric top edges don't fit
together.
Fixes #141
2019-05-11 17:18:10 +02:00
Florian Festi
93c2093ef3
AllEdges: Fix spacing and add edegs around the corner
...
to make it more clear which direction the edges are pointing.
Related #132
2019-04-14 18:17:09 +02:00
Florian Festi
ce8576d39e
New generator: HeartBox
2019-03-24 21:52:26 +01:00
Florian Festi
c09ee50fbd
New generator: NotesHolder
2019-03-23 12:36:21 +01:00
Florian Festi
8bacd1f766
UniversalBox: Fix missing lids for various top_edges
...
Call got refactored away
Resolves : #121
2019-02-27 22:58:05 +01:00
Florian Festi
8db3942757
UniversalBox: Fix positioning of lid parts
2019-02-14 21:32:27 +01:00
Florian Festi
0d07f48b7f
Remove .open() call from the .render() method
...
Having this call there was necessary in the past as the open() method would
need the canvas size as a parameter. This is now determined automatically
after rendering.
Still calling open() is deprecated but won't result in an error.
2019-02-08 17:43:15 +01:00
Florian Festi
861c8451e2
Remove call to .close() from .render() method
...
There is really no need for all the generator to care
Still calling it is deprecated but won't result in an error
2019-02-08 17:32:04 +01:00
Florian Festi
2ba6fa1bf3
Use .saved_context() instead of .ctx.save() and .restore()
2019-02-07 22:43:04 +01:00
Florian Festi
1724f67bdf
Delete never to be finished printer generator
...
This should have become a 3D printer using strings in a delta configuration.
2019-02-07 22:43:04 +01:00
Florian Festi
ded5addbe9
Remove no longer needed calls to ctx.stroke()
...
Boxes.move() take care of that nowadays
2019-02-07 22:43:04 +01:00
Wayne Wylupski
abacdd486e
Implement proper color handling
...
Avoid accessing Boxes.ctx (the cairo context) all over the code.
Have named colors
2019-02-03 16:28:02 +01:00
Florian Festi
6f4e94577b
New generator: RectangularWall
2019-01-12 15:28:17 +01:00
Florian Festi
d0356a12a3
Add parameters to addTopEdgeSettings() for changed defaults
2019-01-12 00:07:37 +01:00
Florian Festi
64fb498e6e
UniversalBox: Use a more robust way of placing the pieces
...
No longer rely on all side walls having the same height
2019-01-11 19:41:02 +01:00
Florian Festi
97e7e3b68f
TypeTray: Swap vertical edge types to match the layout of the UniversalBox
2019-01-11 19:41:02 +01:00
Florian Festi
5c70515f01
TypeTray: Add lids matching top_edge
2019-01-10 22:27:36 +01:00
Florian Festi
371097aa89
PaintStorage: Make grip hole smaller and more rounded
...
Fixes #108
2019-01-10 22:09:45 +01:00
Florian Festi
c0a782b745
TypeTray: Add support for all top_edges
2019-01-03 11:13:27 +01:00
Florian Festi
c2615d4b38
TypeTray: rearrange parts
2018-12-27 17:19:10 +01:00
Florian Festi
2df63b6ec8
ShutterBox: Add style with two rounded corners
...
Move generator to FlexBox category
2018-12-19 18:04:34 +01:00
Florian Festi
879b3149bb
New generator: ShutterBox
...
A box with a rolling shutter made out of flex
2018-12-13 18:39:01 +01:00
Florian Festi
4a79c37e71
CardBox: Add gripping ledge to the lid
2018-12-11 19:33:52 +01:00
Florian Festi
4d2592fecf
Add e edge to bottom_edge selection
2018-12-08 18:22:13 +01:00
Florian Festi
8f03030c53
PaintStorage: Add carrying hole
2018-12-08 12:37:20 +01:00
Florian Festi
925c6ce6dc
PaintStand: Fix previous change
2018-11-24 22:47:35 +01:00
Florian Festi
17e4eb8563
PaintStorage: Fix heights
2018-11-15 22:10:19 +01:00
Florian Festi
d85fa4e849
LaserClamp: Improve design
...
Extend bottom bracket and add hook
Use only one bottom bracket
Add finger ring to allow easier placement
Improve top hook
2018-11-05 22:08:23 +01:00
Florian Festi
0f999a89ad
New generator: AllEdges showing all the standard edge types
2018-11-05 21:38:49 +01:00
Florian Festi
fe89528e05
PaintStorage: Add support for hexagonal hole patterns
2018-10-29 18:16:16 +01:00
Florian Festi
36077e6cb0
PaintStorage: Optimize part placement
2018-10-29 15:44:18 +01:00
jens persson
c28541a977
Add a generator for paintstand
...
A simple stackable paintstand, very much inspired by:
https://www.youtube.com/watch?v=6HJarJg1npk
2018-10-29 15:11:35 +01:00
jens persson
e95f36a18a
Parameterize Silverwarebox
...
Make the messurements selectable
2018-10-28 13:19:37 +01:00
Florian Festi
80288079af
New generator: TwoPiece
...
Based on a generator with the same name by bobm123<bobm123@gmail.com>
2018-10-25 22:35:20 +02:00
Florian Festi
5b93c1228d
CardBox: Add num param for the number of decks
2018-10-25 17:36:46 +02:00
Alexander Bulimov
5a13fbea8b
Add DisplayCase generator
2018-10-24 21:28:54 +02:00
Florian Festi
2060293cf3
New generator: RoyalGame of Ur
2018-10-24 21:23:57 +02:00
Florian Festi
397cc81690
FlexBox3: Use .move()
...
Use .edgeCorner() instead of own implementation
2018-10-19 22:12:13 +02:00
Florian Festi
f7c2d91e42
FlexBox2: Make latchsize configurable
2018-10-19 21:46:30 +02:00
Florian Festi
417a053ad3
FlexBox2: Use .move()
2018-10-19 21:45:26 +02:00