Florian Festi
ec77d6aa22
Doc strings for Parts methods
2018-08-23 23:28:24 +02:00
Florian Festi
897fc23029
Doc string for Boxes.flex2D()
2018-08-23 23:28:24 +02:00
Florian Festi
6c43f4a382
Doc string for Boxes.TX()
2018-08-23 23:28:20 +02:00
Florian Festi
a99094b8d7
Doc string for Boxes.partsMatrix()
2018-08-23 23:27:35 +02:00
Florian Festi
d360703cba
TypeTray: Make bottom_edge parametric
...
This does not affect the inside walls
2018-08-16 20:49:12 +02:00
Florian Festi
46175dde11
Fix url params for checkboxes when re-opening an input form
...
Thanks to Rotzbua for pointing the issue out!
2018-08-16 08:54:52 +02:00
Florian Festi
8563818925
Hook: Boxify and parametrize generator
2018-08-14 14:01:59 +02:00
Marius Bergmann
2831b41d21
Add wall hook generator
2018-08-14 11:55:31 +02:00
Florian Festi
f83ca31a0a
RoundedBox: Add wallpieces param
2018-08-06 19:46:48 +02:00
Florian Festi
af7f29c51f
Add (wall)pieces param to roundedPlate() and surroundingWall()
2018-08-06 19:46:23 +02:00
Florian Festi
7c8ae621f7
CloseBox: Put bed blots at the right places
...
Keep them still disabled, though.
2018-07-25 16:34:58 +02:00
Florian Festi
05c41be4d1
Remove or comment debugging outputs
2018-07-24 20:36:13 +02:00
Florian Festi
cd0fcdcb96
Set a char for CrossingFingerHoleEdge tp avoid collision with the "e" edge.
2018-07-02 19:13:52 +02:00
Florian Festi
44bce898e0
UniversalBox: Add alternative "lid" for f and F top_edges:
...
A rim leaving the box open
2018-07-02 19:07:26 +02:00
Florian Festi
2c7f9f4dc0
UniversalBox: Add f and F as possible top_edge types
2018-07-02 19:07:26 +02:00
Florian Festi
37a798e91e
Add top "lid" for F edge
2018-07-02 19:07:25 +02:00
Sebastian Reichel
8b172cbddd
Add 10" rack box derived from 19" rack box
2018-06-27 21:48:35 +02:00
Sebastian Reichel
d75ea78196
Add support for specifying font color/size
2018-06-27 21:48:35 +02:00
Florian Festi
6538c92910
OrganPipe: Offer multiple units for the pressure given
2018-05-18 14:12:30 +02:00
Florian Festi
924372f79d
Use a minimal line width (0.05mm) even for very small burn values
...
to keep the lines visible in these cases.
2018-05-17 11:27:58 +02:00
Florian Festi
1d0aa05e9a
OrganPipe: Use unicode for Py 2 compat
2018-05-12 17:14:02 +02:00
Florian Festi
d9e8930e31
OrganPipe: Add encoding
2018-05-12 17:11:26 +02:00
Florian Festi
4798c24815
New generator: Organ pipe
...
Still untested
2018-05-12 17:06:10 +02:00
Florian Festi
f99bf32c85
Add hinges and spacing params to CabinetHingeEdge
2018-05-08 23:55:09 +02:00
Florian Festi
2828a85725
Add flatHole() for shafts that are flattened on both sides.
2018-05-05 19:08:37 +02:00
Florian Festi
50b9bc9ffb
TypeTray: Fix finger holes in bottom which had been mirrored in x direction
2018-04-25 23:36:32 +02:00
Florian Festi
616bf42239
RegularBox: Fix top edge for "angled hole" top
2018-04-25 22:02:52 +02:00
Florian Festi
d3c922d289
RegularBox: Use FingerJointSettings for vertical edges, too
...
Fixes #65
2018-04-25 22:02:24 +02:00
Florian Festi
73438fb614
Fix .__getattr__ of Settings class so it can be passed to copy.copy()
2018-04-25 21:52:51 +02:00
Florian Festi
879ae1af68
DisplayShelf: Do not render front wall if set to zero
2018-04-15 19:43:31 +02:00
Florian Festi
ebe02e2be5
DisplayShelf: Use better defaults
2018-04-15 19:43:31 +02:00
Florian Festi
65358c9fad
Add hint to outside param to nominally inner sizes
2018-04-05 22:55:23 +02:00
Florian Festi
b2c54310b6
UnevenHeightBox: Fix lid
...
Looks like it is difficult to come up with a really non symmectrical test case.
Thanks to Mekol for pointing this out!
Related #60
2018-03-17 21:04:24 +01:00
Florian Festi
fa44eb27cf
UneveHeigthBox: Minor tweaks
2018-03-17 17:32:21 +01:00
Florian Festi
58cb06ec94
UnevenHeightBox: Add lid
2018-03-17 17:19:47 +01:00
Florian Festi
7c716a9e5f
UnevenHeightBox: Make bottom edge parametric
2018-03-15 20:46:00 +01:00
Florian Festi
786ff222c2
New generator: UnevenHeightBox
...
Box with different height in each corner
2018-03-15 19:08:47 +01:00
Florian Festi
0604744284
OttoSoles: Add dove tail joints to the connecting edges
2018-03-11 17:43:55 +01:00
Florian Festi
f2106a2c8c
OttoSoles: Add support for tabs
2018-03-11 09:13:40 +01:00
Florian Festi
49ce2ed412
New generator: Ottosoles
...
Foam soles for the OttO Bot
2018-03-10 19:28:30 +01:00
Florian Festi
90ba9f8ee9
LidEdge: Fix duplicated option for spring
2018-03-05 20:10:55 +01:00
Florian Festi
dd7d282c65
Rack19Box: Fix width and placement of holes
2018-02-27 18:41:39 +01:00
Florian Festi
66c419ab7f
New generator: Rack19Box
...
Closed box with screw on top for mounting in a 19" rack.
2018-02-27 18:04:26 +01:00
Florian Festi
c3917d3292
IntegratedHingeBox: switch x and y measurements
...
So the hinge is at the backside along the x axis
2018-02-20 08:23:07 +01:00
Florian Festi
8cb9919968
FlexBox2: Rename params to reflect the actual axis of measurement
...
h -> x
y -> h
x -> y
2018-02-19 16:49:04 +01:00
Florian Festi
78d35a92e0
Fix CrossingFingerHoleEdge
...
which relies on __call__() of the super class drawing a line
2018-02-12 22:04:20 +01:00
Florian Festi
211e302b41
Fix devision by zero for zero lengths
2018-02-10 21:00:08 +01:00
Florian Festi
039fe5f2ee
ElectronicsBox: Fix holes in the lid
2018-02-03 22:33:27 +01:00
Florian Festi
a70222d646
New generator: RackBox
2018-02-03 22:31:53 +01:00
Florian Festi
6ef43a8f48
Add flangedWall() and use it in the ElectronicsBox
2018-02-03 21:52:12 +01:00
Florian Festi
b0bef745b2
ElectronicsBox: Fix top edge and height
2018-02-02 14:06:18 +01:00
Florian Festi
a53c5857c2
New generator: AngledCutJig
...
For making angled cuts in a laser cutter
2018-01-21 22:05:48 +01:00
Florian Festi
8314a413fd
Fix placement of rectangularTriangles
2018-01-21 16:48:43 +01:00
Florian Festi
4e034949d3
Fix tabs for straight edges (eE) with bed bolts
...
Add tabs param to bedBoltHole
2018-01-19 23:48:27 +01:00
Stefan Grosshauser
73e1821e71
enable bedbolts for Straight 'e' and OutSet edges 'E'
...
note that this mostly ignores that positioning bedbolts is done
in the BedBolt class for finger joints.
Coding style could be much improved.
2018-01-18 15:07:33 +01:00
Stefan Grosshauser
07f88cd8e5
make __call__() abstract for BaseEdge; and inherit OutSetEdge from Edge
2018-01-18 15:07:24 +01:00
Florian Festi
62b6016448
OttoLegs: Increase number of tabs for feet and ankles
2018-01-13 21:11:33 +01:00
Florian Festi
68f1c375f7
OttoLegs: Move tabs to outer ring
2017-12-20 18:25:55 +01:00
Florian Festi
7bd2b9e452
HingeEdge: Add tabs to hinge disk
2017-12-20 18:25:55 +01:00
Florian Festi
ce240105a8
Add tabs param to hole()
2017-12-20 18:25:55 +01:00
Florian Festi
c02cc1e95c
Add tabs to corner
2017-12-20 18:25:55 +01:00
Florian Festi
d2496df3bb
Boxes.moveArc()
2017-12-20 18:25:44 +01:00
Florian Festi
703d0e49db
OttoBody: Add tabs to the PCB clamps
2017-12-19 20:10:08 +01:00
Florian Festi
f44f87a25c
Remove print for Python 2 compat
2017-12-19 19:36:37 +01:00
Florian Festi
946d040bac
OttoBot: Move to Misc UI Group
...
Set default leg legth to 34mm
2017-12-18 23:49:18 +01:00
Florian Festi
e26991695a
Mark top side of servo mount.
...
Move servo mounts up as they need to be cut separately (in 5mm)
2017-12-17 15:30:32 +01:00
Florian Festi
e5bb6a5d7a
Add tabs to Boxes.edge() and most Edge classes
...
and Boxes.polyline()
Add to some parts of the Otto Bot
2017-12-15 16:45:32 +01:00
Florian Festi
e0caa3aad8
OttoBody: Add fix for changed ChestHinge
2017-12-09 16:54:20 +01:00
Florian Festi
f0dc89c617
Make play of ChestHinge a regular param
2017-12-09 16:54:10 +01:00
Florian Festi
9dfa95f45b
Fix ChestHinge
...
Add the play of the hinge to the width of the edge
Adjust IntegratedHingeBox
Fixes #45
2017-12-07 22:29:09 +01:00
Florian Festi
319b1f869f
Use unicode for Python 2 compat
2017-11-30 23:32:30 +01:00
Florian Festi
d52b561a2f
Use explicit encoding
2017-11-30 23:30:50 +01:00
Florian Festi
1b2f5791bd
Use Boxes.description in the cli help and the web interface
2017-11-30 22:48:02 +01:00
Florian Festi
3dfd99c68a
Rename method to not collide with new description property
2017-11-30 22:46:35 +01:00
Daniela Festi
72e6dd2213
Added a description to TrafficLight generator
2017-11-30 22:46:35 +01:00
Daniela Festi
fa9ac678c0
Added variables for description of generators to main class
2017-11-30 22:46:35 +01:00
Florian Festi
0d9885ad4c
Stachel: Fix length of pin clamp for middle layer
2017-11-23 21:04:54 +01:00
Florian Festi
2772eba87c
Gears: holes for the shafts
2017-11-22 21:32:25 +01:00
Florian Festi
a7f6ef1b62
Gears: Print sizes
2017-11-22 21:32:04 +01:00
Florian Festi
afbb8d11fd
Gear generator
2017-11-22 21:32:04 +01:00
Florian Festi
eb07c927c4
Support multi line .text()
2017-11-22 21:32:04 +01:00
Florian Festi
f77c19d839
Stachel: Clean up and move generator to Misc
2017-11-21 23:08:39 +01:00
Florian Festi
5a6bc71a7c
Stachel: replace absolute sizes with (internal) parameters
2017-11-21 22:39:57 +01:00
Florian Festi
941676d2b7
New generator: Stachel - an end pin for bass recorders
2017-11-21 22:39:57 +01:00
Florian Festi
08d7a026b1
NemaMount: Add finger holes to copy on another part
...
instead of using the base plate
2017-11-19 19:30:06 +01:00
Florian Festi
642212d2ce
New generator: NemaMount
2017-11-19 18:10:59 +01:00
Florian Festi
46c4960edc
New generator: Display
2017-11-18 18:28:13 +01:00
Florian Festi
45c73e57fb
New generator: EletronicsBox
...
Closed box with screw on top and mounting holes
2017-11-15 17:19:41 +01:00
Florian Festi
90078049f8
Also support d (diameter) param for Boxes.hole()
2017-11-15 17:19:41 +01:00
Florian Festi
36c0ec48fe
TypeTray: Add closedtop parameter
...
Add a top wall turning the type tray into a closed box with multiple
compartments
2017-11-14 20:21:01 +01:00
Florian Festi
7793729688
New generator:LBeam
...
Simple Lbeam made of two wall joint with a right angle
2017-11-14 20:20:08 +01:00
Florian Festi
8d846df9d1
Add D holes to knobs
2017-11-07 23:39:50 +01:00
Marius Bergmann
c0325b52ac
template: Remove invalid parameter and whitespace
2017-11-03 22:54:06 +01:00
Florian Festi
dd2cedeb57
Knobs: Improve param descriptions
2017-10-01 21:13:29 +02:00
Florian Festi
696307397d
Refuse knobs with less than 2 serrations
2017-10-01 21:01:18 +02:00
Florian Festi
98e9f827ec
waivyKnob: Fix number of serrations
...
Used to print only have the number of serrations and didn't close
on uneven numbers
2017-10-01 20:54:04 +02:00
Florian Festi
dfcf3d65c8
New generator: ConcaveKnob in Parts
2017-10-01 20:34:19 +02:00
Florian Festi
647c5302b6
New generator: WaivyKnob
2017-10-01 20:20:36 +02:00
Florian Festi
241c65b244
.waivyKnob(): Fix start position for angles != 45 degees
2017-10-01 20:18:42 +02:00
Florian Festi
64c980817b
Manully select font face
2017-09-19 22:53:27 +02:00
Florian Festi
9dbc8fd98b
Modernize _template.py
2017-09-16 21:30:41 +02:00
Florian Festi
f829ff2a82
PoleHook: Use screwhead param for knob
2017-09-16 21:30:41 +02:00
Florian Festi
b7f877eacd
Fix bedbolts
...
BedBoltSettings need to become a subclass of Settings instead of a list
of values at some point.
2017-09-13 11:39:03 +02:00
Florian Festi
b623008ea3
ClosedBox: fix (commented out) BedBolt support
2017-09-13 11:39:03 +02:00
Florian Festi
23a1da105e
WineRack: Remove debug code for checking number of walls needed.
2017-09-05 23:05:11 +02:00
Florian Festi
7453455512
WineRack: Make unnecessary walls optional
2017-09-05 23:00:54 +02:00
Florian Festi
0e7827f9a9
WineRack: Add front cover
2017-09-05 21:04:20 +02:00
Florian Festi
fbfb851474
New generator: WineRack
...
A honey comb like wine rack
2017-09-05 21:04:20 +02:00
Florian Festi
ab750077fa
.partsMatrix(): Do not error out for zero or negative parts count
2017-08-28 23:10:56 +02:00
Florian Festi
ddcf13bf6c
svgutil: Make detection of view port a bit more robust
2017-08-20 19:56:33 +02:00
Florian Festi
592fbe95c4
OttoLegs: Change ankles. Fix servo horn with a C-ring
...
Fixes issue with servo horns only being adjustable in steps of 18 degrees
This led to missaligned feet which resulted in loss of freedom of movement.
2017-08-19 22:14:30 +02:00
Florian Festi
6fecb9aa29
OttoBody: Move main switch to outer wall
...
Shorten servo holder so it no longer needs a hole for the switch
2017-08-19 19:31:54 +02:00
Florian Festi
398851255d
OttoLegs: Use servo horn for actuating the ankles
2017-08-12 00:07:34 +02:00
Florian Festi
4dd271df74
OttoLegs: Make ankle screw screwed into leg
...
to give more stability to the joint
2017-08-11 18:44:34 +02:00
Florian Festi
bb76a8bd7b
OttoLeg: Use partsMatrix to get multiple part
2017-08-11 17:46:50 +02:00
Florian Festi
93b94d6e70
Fix move="right" for partsMatrix
2017-08-07 17:08:16 +02:00
Florian Festi
09dd779cbd
OttLegs: Make hole for servo cable over whole width of the leg
2017-08-07 17:03:57 +02:00
Florian Festi
fafc1c01ef
OttoLegs: break ankles into separate paths
2017-08-03 23:19:32 +02:00
Florian Festi
e91f53b0fa
OttoLegs: Change design of ankles
2017-08-03 23:00:20 +02:00
Florian Festi
b4b6799721
OttoBody: Add hook to PCB Clip
2017-08-03 22:32:33 +02:00
Florian Festi
e3035da713
OttoBody: Move hole for push button
2017-08-01 21:19:01 +02:00
Florian Festi
2e9ac29d01
OttoLegs: Make length of legs configurable
2017-08-01 21:17:35 +02:00
Florian Festi
979b6ae936
OttoBody: Add push button
2017-07-31 21:18:06 +02:00
Florian Festi
a639c04de2
OttoBody: Clips for keeping the mouth shut
2017-07-31 21:08:26 +02:00
Florian Festi
31e3817f32
OttoBody: New PCB Clamps
2017-07-31 20:46:41 +02:00
Florian Festi
fd23c74e07
Otto Body: parts for mounting the PCB
2017-07-30 21:23:00 +02:00
Florian Festi
e26d17c840
AngledBox: Don't overwrite h param
...
Using h as temporary variable was overwriting the variable containing the
height of the box.
Fixes #41
2017-07-28 23:33:36 +02:00
Florian Festi
83a72552e2
Ottobot: Make hole for USB plug a bit smaller again
2017-07-25 22:43:11 +02:00
Florian Festi
c823cb78d6
OttoBot: Add Hole for on/off switch
2017-07-25 21:57:58 +02:00
Florian Festi
3876ea5ddd
Ottobot: Increase hole for USB plug
2017-07-23 21:29:14 +02:00
Florian Festi
074646fdec
_template.py tweaks
2017-05-20 20:41:51 +02:00
Florian Festi
82463317bb
Edges generator for printing the registerd Edge types
...
Not really a generator...
2017-05-20 20:41:51 +02:00
Florian Festi
abb7706b6d
Python2 compat for Inkscape
2017-05-14 21:47:49 +02:00
Florian Festi
770b3dc02f
Add .dHole()
2017-05-05 16:52:42 +02:00
Florian Festi
d7aadc9b72
Add callback param to gears.gearCarrier()
2017-05-04 21:41:18 +02:00
Florian Festi
07ede0a5c5
Add support for "only" in the move param of .partsMatrix()
2017-05-04 21:41:18 +02:00
Florian Festi
9bf9922d28
Stroke in move after part is completed
2017-05-04 21:41:18 +02:00
Florian Festi
3822cc4882
Add TX holes
2017-05-04 21:41:18 +02:00
Florian Festi
ae619aabea
Flexbox4: Fix length of lid
...
to overlap the side wall
2017-04-11 21:09:41 +02:00
Florian Festi
7bbf82c958
UBox: Fix size of lid
2017-04-11 20:55:21 +02:00
Florian Festi
b63dcfeee6
Make Traylayout work without main function
2017-04-05 04:33:42 +02:00
Florian Festi
5b9c8e4d71
Remove main function from generators
...
Generators are no longer executable on their own. Use scripts/boxes
instead.
2017-04-05 04:33:42 +02:00
Florian Festi
bffd732c3f
scripts/boxes: Use generator classes instead of main functions
...
Make Boxes.parseArgs more robust
--list generators by UI group.
Pass arguments explicitly instead of fiddling with sys.argv
2017-04-05 04:33:28 +02:00
Florian Festi
f9c0cb8cab
Support putting class and instances into UI Groups
2017-04-02 02:31:37 +02:00
Florian Festi
8e65298c6b
Planetary2: Print gearing ratio and change default for sun gear
2017-04-01 23:54:44 +02:00
Florian Festi
12f2cbc1e2
Planetary2: Add allignment pins to sun gear
2017-04-01 21:18:48 +02:00
Florian Festi
273190932f
Planetary2: Order part the way they need to go together
2017-04-01 21:06:57 +02:00
Florian Festi
4c17d6a4a1
Planetary2: Put planet gears in the order they need to go together
2017-04-01 20:59:19 +02:00
Florian Festi
7f1e54be15
Planetary2: Add pin holes for ring gear and add second ring
2017-03-30 20:59:13 +02:00
Florian Festi
8487d5c379
Planetary2: New generator for a ~100 reduction to belt pulley
2017-03-29 07:44:48 +02:00
Florian Festi
93480e082d
gears: Add teeth_only param to allow using gears as lines and not only as parts
2017-03-29 07:42:57 +02:00
Florian Festi
427a6fc54b
Change default of mount_hole to 0
2017-03-29 07:42:15 +02:00
Florian Festi
bad114400f
Use better default for height of pulley (using the new keyword style)
2017-03-29 07:41:05 +02:00
Florian Festi
ff6da9eb80
Fix pulley size calculation for r_axle being None
2017-03-29 07:40:17 +02:00
Florian Festi
c7490155f7
Add nema_mount default parameter
...
Make nema_sizes available outside of NEMA() function.
This whole stuff should probably move into it's own file/class at some point
2017-03-29 07:38:10 +02:00
Florian Festi
53cbed768b
Allow using keyword args for buildArgParser for setting the defaults
2017-03-29 07:36:50 +02:00
Florian Festi
c2fa8c85cf
Pulley: Add insideout param
...
This allows using timing belts as strainwaves in harmonic drives.
2017-03-22 22:03:09 +01:00
Florian Festi
c2ab70eefe
Add Boxes.circle() primitive
2017-03-22 22:03:09 +01:00
Florian Festi
71bd013f3f
RegularBox: Better description
2017-03-13 11:41:12 +01:00
Florian Festi
cd0d49bf6f
OttoLegs: Use two different hole sizes for the ankle
...
to allow screwing it into one side while moving freely on the other
2017-03-12 14:47:21 +01:00
Florian Festi
cd3fee5e76
OttoLegs: More tweaks
...
Lengthen front by 1mm to close gap to servo
Lower ankle hole at leg by 0.5mm
Shorten internal wall holding the servo at top
2017-03-11 20:14:29 +01:00
Florian Festi
672295310b
OttoBody: Body for Otto LC
2017-03-11 18:22:41 +01:00
Florian Festi
c6c2e203f2
OttoLegs: Make ankle bolt diameter configurable
2017-03-11 18:22:41 +01:00
Florian Festi
271bed0308
OttoLegs: wall for better fixating the servos
2017-03-11 18:22:41 +01:00
Florian Festi
6bc695a418
OttoLegs: Add second leg
2017-03-11 18:22:41 +01:00
Florian Festi
e316877d06
OttoLegs: Make room for cables
2017-03-11 18:22:41 +01:00
Florian Festi
db4e878bb4
OttoLegs: Legs for Otto LC
2017-03-11 18:22:41 +01:00
Florian Festi
121e2107fb
Import lxml locally to avoid hard dependency
...
The code is used in the Inkscape plugin only.
2017-03-10 23:00:41 +01:00
Florian Festi
4ab1dcc323
RoundedBox: Fix description
2017-03-06 22:24:05 +01:00
Florian Festi
eecbceda11
Rename Box2 -> UniversalBox
2017-03-06 22:24:05 +01:00
Florian Festi
47f3037e23
rename Box3 -> OpenBox
2017-03-06 22:24:05 +01:00
Florian Festi
5026c2bc03
Rename Box5 -> HingeBox
2017-03-06 22:24:05 +01:00
Florian Festi
e5b19978dd
Rename Box4 -> IntegratedHingeBox
2017-03-06 22:24:05 +01:00
Florian Festi
75b7724255
Rename Box -> ClosedBox
2017-03-06 22:24:05 +01:00
Florian Festi
5956182328
Parts.ringSegment()
2017-03-05 12:52:44 +01:00
Florian Festi
5e33d057fc
UBox: Limit radius to possible values and merge flex if radii touch
2017-03-04 15:29:28 +01:00
Florian Festi
a0d992f43a
Stop printing random stuff on stdout
2017-02-26 17:02:16 +01:00
Florian Festi
41bc4d028f
Use sys.stdout.buffer to be able to write bytes (for Python 3 compat)
2017-02-25 19:59:53 +01:00
Florian Festi
cb8ebefeb1
Fix Servo.choices() and use it in robotarm
2017-02-25 19:59:16 +01:00
Florian Festi
174b20fc11
Fix main
2017-02-25 19:40:24 +01:00
Florian Festi
a81ba48d45
Take viewBox and size of SVG documents into account when merging them
2017-02-25 16:10:28 +01:00
Florian Festi
ce87babfdd
RoundedBox: Fix hole size
...
Size calculation was wrong but compensated the broken size adjustment with
"outside" set.
2017-02-25 15:52:51 +01:00
Florian Festi
490d089a83
Planetary: Python2 fix. // doesn't allow floats in Python 2
2017-02-25 11:24:58 +01:00
Florian Festi
d4edafe2d9
Fix ChestHingeSetting
...
Got broken by 6756d16b67
2017-02-23 20:57:01 +01:00
Florian Festi
e0a4d06c43
Hackish way to make scriptsboxes to work with Inkscape.
2017-02-23 17:38:26 +01:00
Florian Festi
ff7ee22885
Add svgutil.svgMerge() allwing to add generated box into anoterh svg
...
Implemetation has still many short comings. E.g. assumes units and layout of
document passed in. Also assumes to be merged document to be generated by
boxes.py.
2017-02-23 17:38:26 +01:00
Florian Festi
39e74e67ba
Add scripts/boxes2inkscape for generating inx files from box generators
...
Code for handling traylayout still missing.
2017-02-23 17:38:26 +01:00
Florian Festi
a93e280477
Make reference a separate path object
...
Avoid it being merged with teh first par tof the drawing
2017-02-23 17:38:26 +01:00
Florian Festi
e23d8034c5
Make BoolArg accept upper and lower case values
2017-02-23 17:38:26 +01:00
Florian Festi
b440d1c767
Use BoolArg when creating arg parser for edges.Settings
2017-02-23 17:38:26 +01:00
Florian Festi
1b3f9dbc3a
Robotarm: Generator for servo powered robot arm segments
2017-02-22 22:33:22 +01:00
Florian Festi
40d53ac1ba
Robot parts: Initial commit
2017-02-22 22:33:22 +01:00
Florian Festi
1bed3f2a39
rectangularWall() fix positioning with ignore_widths
...
containing parts of the lower left corner.
2017-02-22 20:01:29 +01:00
Florian Festi
3cad4f27af
Add tangent() function
2017-02-22 20:01:28 +01:00
Florian Festi
d2774f151d
Lamp: fix no longer valid default in setting
2017-02-18 19:13:57 +01:00
Florian Festi
cc577956a4
Flexbox3: Fix radius of lid
...
May still be off a bit. But I can't see why...
2017-02-18 19:06:10 +01:00
Florian Festi
117ace3233
FlexBox3: Fix finger joints of lid
2017-02-18 19:06:10 +01:00
Florian Festi
1f9342b678
Castle: Make available in UI and adjust to current code base
2017-02-18 19:06:10 +01:00
Florian Festi
6756d16b67
Use .settings.thickness in edges instead of global value
2017-02-18 19:05:21 +01:00
Florian Festi
561eb0034c
Add "Unstable" UIGroup
2017-02-15 15:55:01 +01:00
Florian Festi
d3c76f2b9e
Put box generator into groups and adjust the menu web page accordingly
2017-02-13 17:31:58 +01:00
Florian Festi
5a0f3d42ea
Add UIGroup class and instances for structuring the box generators
2017-02-13 17:31:02 +01:00
Florian Festi
c820c1b77d
Move lid code from boxes/generators/box2.py to boxes/lids.py
...
Rename the classes to no longer show up in the list of generators
2017-02-12 23:18:37 +01:00
Florian Festi
0739fd0b94
Exclude Boxes classes starting with _ in getAllBoxGenerators()
...
Exclude mix-in classes that are not supposed to be used on their own
2017-02-12 22:20:32 +01:00
Florian Festi
399e5b468f
New generator: UBox - a box with rounded corner at the bottom
2017-02-12 15:00:17 +01:00
Florian Festi
b59de950c0
Box2: Refactor lid generation out of the Box2 class
2017-02-12 15:00:17 +01:00
Florian Festi
dd6c5560f9
Support chars es edge parameters in Boxes.edgeCorner()
2017-02-12 15:00:17 +01:00
Florian Festi
a7d0dda9f8
New generator: Box5 box with lid attached with cabinet hinges
2017-02-11 18:15:44 +01:00
Florian Festi
305986dad8
Add cabinet hinge to top_edge and support it in Box2
2017-02-11 18:15:44 +01:00
Florian Festi
94c727cc30
Add CabinetHingeEdge
2017-02-11 18:15:44 +01:00
Florian Festi
fb5398b30d
PoleHook: Initial commit
2017-02-11 18:15:34 +01:00
Florian Festi
f1b8d68d65
Fix bedbolts for finger holes
2017-02-11 18:15:34 +01:00
Florian Festi
250131e152
Fix previous fix *sigh*
2017-02-09 18:47:20 +01:00
Florian Festi
3e3ed3b0dd
Add finger joint settings again
...
Got removed accidentially in 8d754c
2017-02-09 00:02:41 +01:00
Florian Festi
da6dcb4c68
Box4: Use ignore_widths to get finger joints on the whole length of all edges
2017-02-07 20:18:48 +01:00
Florian Festi
3daa9a846a
Add ignore_widths param for rectangularWall()
...
It does not pass the width of edges to edgeCorner but instead lengthen the
neighboring edge. The widths are numbered from 0 to 7 starting with the
horizontal part of the lower right corner.
2017-02-07 18:56:07 +01:00
Florian Festi
1e6893d0b1
Box4: Box with boxy lid and built-in hinge
2017-02-06 22:36:11 +01:00
Florian Festi
544c40a0d3
Add Chest Hinge edge classes
2017-02-06 22:35:26 +01:00
Florian Festi
70574056d6
Fixes for rectangularTriangle
2017-02-05 21:02:46 +01:00
Florian Festi
2fa07190ff
Fix finger joint setting defaults
...
space and width got mixed up in 8d754c3855
2017-02-05 16:30:37 +01:00
Florian Festi
f982918205
Add r param to rectangularTriangle()
2017-02-04 15:01:16 +01:00
Florian Festi
07661b1eae
Formats: Generate tempfile in same directory to ensure rename works.
2017-02-04 15:01:16 +01:00
christopher
8d754c3855
Use default finger/width settings of 2.0 for every box
2017-01-30 10:12:27 +01:00
christopher
c36d819e10
Change defaults
2017-01-30 09:37:10 +01:00
Florian Festi
17e2b55fcf
Box2: Add flat lid
...
Make chestlid param a general lid param
2017-01-24 22:49:25 +01:00
Florian Festi
28ad1c6dc3
RoundedBox: Add top param for top opening and lid
2017-01-21 13:54:58 +01:00
Florian Festi
6ef950816e
Add edge parameter to Boxes.roundedPlate
2017-01-21 13:54:58 +01:00
Florian Festi
a8241b2118
New generator: RoundedBox
...
Still very basic. Needs top parameter similar to AngledBox
2017-01-19 21:36:43 +01:00
Florian Festi
fa4fd943ca
New generator: DisplayShelf - a shelf with forward slanted floors
2017-01-14 23:13:22 +01:00
Florian Festi
8514ede2c3
AngledBox: Fix fingers on top of walls for "angled hole"
2017-01-08 18:56:05 +01:00
Florian Festi
7b5614659a
New generator: AngledBox
2017-01-08 17:25:36 +01:00
Florian Festi
8dc13440ee
Fix boolean params. Not passing 0, None, False or off works for setting them to False
...
Thanks to chrisjshull for pointing out how to fix this in the web UI.
Fixes #19
2017-01-08 17:25:36 +01:00
Florian Festi
13cdb35954
Make RegularPolygonWall a path of its own
2016-12-17 11:37:11 +01:00
Florian Festi
0cbd713718
RegularBox: Fix outside parameter
2016-12-17 11:36:26 +01:00
Florian Festi
0dc6aef5d4
RegularBox: Add angled hole top style
2016-12-17 11:24:47 +01:00
Florian Festi
b2b0ccd6f1
Fix FingerJoints with angles != 90 degrees
...
Fix margins
Fix amount of recess for spaces
2016-12-14 22:07:36 +01:00
Florian Festi
6298c80527
RegularBox: Fix angled lid
2016-12-14 21:02:49 +01:00
Florian Festi
a5fd1775e0
New generator: RegularBox
2016-12-13 22:58:56 +01:00
Florian Festi
cbe32cc5a7
Code for Regular Polygons
...
* Boxes.regularPolygon for calculation
* Boxes.regularPolygonAt for simple polygon
* Boxes.regularPolygonWall
Also fix edgeCorner() for angles != 90 degrees
2016-12-13 22:58:10 +01:00
Florian Festi
75adf0b15f
TrafficLight: Add support for horizontal layout of lights
2016-11-30 21:45:17 +01:00
Florian Festi
f133e2aa12
TrafficLight: Add windows to be cut from transparent (and colored) material
2016-11-30 18:31:44 +01:00
Florian Festi
16e93ca086
TrafficLight: Fix edge type for front panels
2016-11-30 11:29:55 +01:00
Florian Festi
23cf0eaa3a
TrafficLight: Add param for number of lights
2016-11-29 23:43:01 +01:00
Florian Festi
273174fae8
New generator: TrafficLight
2016-11-29 23:42:17 +01:00
Florian Festi
aa4c0fd1d4
Add FingerJoints to the bottom of the front plates
2016-11-28 21:11:38 +01:00
Florian Festi
be6de6a793
Support FingerJoints with less than 90 degrees.
...
This means bending angle < 90. The actual angle is bigger than 90
2016-11-28 21:11:38 +01:00
Florian Festi
6f0a4cae86
Use polyline() for FingerJointEdge
2016-11-28 21:11:38 +01:00
Florian Festi
aa5fa73c8a
Add edgeObjects() method to Settings to create Edge objects
2016-11-28 21:11:38 +01:00
Florian Festi
f30221d265
Fix .margin() for CompondEdge
2016-11-26 13:40:27 +01:00
Florian Festi
a0be85764a
Use FingerJointSettings.height as margin of Finger Joints
2016-11-17 21:39:32 +01:00
Florian Festi
0fc6527150
BinTray: Switch slots between vertical and horizontal walls
...
to better support the floors.
Also fix margin of BinFront edge class(es)
2016-11-13 11:58:07 +01:00
Florian Festi
c39b33ad14
New BinTray generator
2016-11-13 00:40:55 +01:00
Florian Festi
69ac52aaab
Slide-on Edge: Add optional springs that hold the lid in place
...
Fix pin length to two thicknesses
2016-11-12 17:50:29 +01:00
Florian Festi
43c0178d14
Make fingers for slide-on lid bigger by defaut
2016-11-12 17:01:44 +01:00
Florian Festi
a8af428941
Manually use multiple arcs to get more precise curves
2016-11-02 21:50:44 +01:00
Florian Festi
fe79970cc3
Beautify web UI
...
Watch self.css
2016-11-01 23:46:25 +01:00
Florian Festi
0cde4a71e6
Add params for edge settings to all generators
2016-11-01 23:46:25 +01:00
Florian Festi
7baafebaea
Remove debug print
2016-11-01 23:46:25 +01:00
Florian Festi
748d8b3888
Remove arguments for FingerJoints from default arguments
2016-11-01 23:46:25 +01:00
Florian Festi
ec2a365598
Use arguments from default Setting classes when creating the default edges
2016-11-01 23:46:25 +01:00
Florian Festi
d980c6b95f
Add minimal doc strings to Settings
2016-11-01 23:46:25 +01:00
Florian Festi
c3e2470e8d
Rename style values to something more meaningful
2016-11-01 23:46:25 +01:00
Florian Festi
2ace15475a
Check types in Settings class and support choices
2016-11-01 23:46:25 +01:00
Florian Festi
699fb920bc
Make Hinges more robut against invalid style arguments
2016-11-01 14:04:35 +01:00
Florian Festi
fd3a333cb0
Allow passing new default values to Boxes.addSettingsArgs()
2016-11-01 14:04:35 +01:00
Florian Festi
c816de811b
Beautify doc strings of edge settings and sort argument entries
2016-10-31 22:16:51 +01:00
Florian Festi
3a0df10866
Create arguments from edge settings starting with FingerJointSettings
2016-10-31 22:13:09 +01:00
Florian Festi
5a721df82b
Put arguments into groups and use them to display them in the web interface
2016-10-31 22:11:54 +01:00
Florian Festi
9095c3934f
Return to original point after drawing finger holes
2016-10-30 20:20:56 +01:00
Florian Festi
44b55029a0
Do not break lines on empty callbacks
...
Boxes.cc() did move the coordinate system arround even if the callback is
None. This breaks the continuity of the border. If there is callback the
line is still broken.
2016-10-30 20:20:56 +01:00
Florian Festi
33d11487de
Add edges for a sliding lid
...
Add to top_edges and support in Box2
2016-10-30 20:17:13 +01:00
Florian Festi
2494aeb3ae
Add play param for FingerJoints
2016-10-30 19:48:59 +01:00
Florian Festi
7203320e70
Move finger calculation into FingerJointBase class
2016-10-30 19:48:59 +01:00
Florian Festi
dc045eefe2
Remove no longer needed local vars
2016-10-30 19:48:59 +01:00
Florian Festi
9220bccb68
Clarify burn param
2016-10-20 20:07:23 +02:00
Florian Festi
4e632325e3
Arcade: Increase height of keyboard
2016-10-17 21:29:58 +02:00
Florian Festi
9b4a45a1d5
Arcade: Add width as a parameter
...
Fix movement of side
2016-10-17 21:16:02 +02:00
Florian Festi
ff6ba3595d
New Generator: Arcade - a desktop arcade cabinet
2016-10-17 21:12:12 +02:00
Florian Festi
4f3883374d
Fix position of finger holes
2016-10-15 20:57:36 +02:00
Florian Festi
24a8588485
gears.py: allow zero spokes
2016-10-12 22:52:35 +02:00
Florian Festi
3ce2115365
Add RackEdge
2016-10-12 22:52:35 +02:00
Florian Festi
fc36515fbd
Properly center rack and make it a single line for negative base heights
...
Preparation for RackEdge
2016-10-12 22:52:35 +02:00
Florian Festi
accb6eb45d
gears.py: Support non closed line segments in drawPoints()
2016-10-12 22:52:35 +02:00
Florian Festi
33681db645
Add closed param to kerf()
...
Allow for non close line segments and handle ends correctly
2016-10-12 22:52:35 +02:00
Florian Festi
de7a168377
vectors.py: Don't error out when normalizing zero length vectors
2016-10-12 22:52:34 +02:00
Florian Festi
83f0c813dd
vectors.py: add circlepoint(r, a)
2016-10-02 20:48:22 +02:00
Florian Festi
ad00d64b26
partsMatrix()
2016-10-02 20:48:22 +02:00
Florian Festi
586aeb7fb3
Allow finger joints as top edge
...
Add matching lid to Box2
2016-10-02 20:47:02 +02:00
Florian Festi
0764a3660f
gears.p: More fixes for racks
2016-10-01 23:30:32 +02:00
Florian Festi
bc1d9ce19e
gears.py: fix rack with draw_guides=False
2016-10-01 22:35:32 +02:00
Florian Festi
b0fb04762b
Rotary: Make beam dimmensions parametric
2016-09-28 17:56:42 +02:00
Florian Festi
610a26736e
Support drawing multiple rectangularTriangle(s) at once
...
Add support for setting diagonal edge type
2016-09-26 21:59:52 +02:00
Florian Festi
cc42a8e165
Add rectangularTriangle()
2016-09-26 21:59:52 +02:00
Florian Festi
14acd07faf
Fix latch length
...
Remove no longer needed burn correction
2016-09-26 21:59:52 +02:00
Florian Festi
09ce2bd78b
Fix size virtual size of gear carrier
2016-09-26 21:59:52 +02:00
Florian Festi
46f40bdae6
Planetary: Fix description
2016-08-22 20:48:21 +02:00
schinken
93af56ff9c
Code Reformat #1
2016-08-17 15:07:41 +02:00
Florian Festi
af167295b8
Rotary: Fix spindle mechanism. Increase width of scissor lift to 70mm.
2016-08-05 22:59:35 +02:00
Florian Festi
828cd12d49
Rotary: Add knifethickness param and support variant for honey comb table
2016-08-05 22:59:35 +02:00
Florian Festi
072845be57
Rotary: Make some clearing space over the idle rollers
2016-08-05 22:59:22 +02:00