Commit Graph

500 Commits

Author SHA1 Message Date
Florian Festi ec9d911142 DividerTray: Use ValueError instead of assert to treat this as wrong user input 2020-02-01 15:17:18 +01:00
Florian Festi 069dd853aa BinTray: limit front parameter 2020-02-01 15:14:12 +01:00
Florian Festi 2121228036 TrayLayout: Error out if tray is just a single wall 2020-02-01 14:51:38 +01:00
Florian Festi 2a7e1e62d1 PaintStorage: Prevent division by zero 2020-02-01 14:31:24 +01:00
Stefan Reichhard 37bff9d358 fixed d3 diameter (mounting screw holes) 2020-01-22 16:11:18 +01:00
Florian Festi 1f3110c6fa New generator: TriangleLamp 2020-01-21 21:34:02 +01:00
Florian Festi e2b87af2a4 UniversalBox: Add outside parameter
Fixes: #144
2019-12-14 19:13:40 +01:00
Florian Festi aba9631b00 Make joints of box sides go to the very bottom
for NotesHolder, TypeTray and UniversalBox.
The same should be done to many other boxes as soon as they get the
bottom_edge parameter

Resolves: #111
2019-12-14 14:18:38 +01:00
Florian Festi c5474e7488 DiscRack: Limit lower_factor and rear_factor to smaller than one 2019-12-14 12:23:08 +01:00
Florian Festi 024b574763 TrayLayout: Add default for layout param 2019-12-14 12:14:24 +01:00
Florian Festi 093e10a3ac AngledBox: Use FingerJointSettings for vertical edges, too 2019-12-06 23:37:22 +01:00
Florian Festi bd1db150c7 New geneator: SpicesRack 2019-11-29 19:58:27 +01:00
Marius Bergmann 9f8b84b3f1 add parameters for banana socket and flipswitch diameters 2019-11-20 11:57:13 +01:00
Marius Bergmann 2c367562a9 remove commented code 2019-11-20 11:57:13 +01:00
Marius Bergmann 90fdf897a9 formatting: whitespace cleanup 2019-11-20 11:57:13 +01:00
Florian Festi c67d1f874c StorageShelf: Add retainer_hole_edge param
to allow strengthening the retainer walls by using an h edge.
Also use a h edge on the bottom retainer wall if selected as bottom_edge.
2019-11-09 23:32:12 +01:00
Florian Festi e8cda89381 StorageShelf: Fix holes for inner vertical walls 2019-11-09 23:31:26 +01:00
Florian Festi 71711baa1a StorageShelf: Add retainer wall
This patch does not add finger joints to the vertical walls to attach the
retainer walls as the walls are likely to be to small to be able to make use
of them. In hte long run they should be added, though.
2019-11-09 17:10:23 +01:00
Florian Festi 0cdc930459 StorageShelf: Change front edge from E to e
This makes the shelf one thickness less deep - as it should be
2019-11-09 16:10:30 +01:00
Florian Festi 923798beb9 SBCMicroRack: Fix dowel diameter 2019-11-07 15:38:16 +01:00
Florian Festi 2860a32360 SBCMicroRack: Comment out unfinished fan parameter 2019-11-07 15:38:16 +01:00
Florian Festi d9c190073b SBCMicroRack: Don't draw bottom fingerholes twice 2019-11-07 15:38:16 +01:00
Florian Festi af6c9be8f7 SBCMicroRack: Rearrange parts 2019-11-07 15:38:16 +01:00
gmorell 569eb2f49c New generator: SBCMicroRack 2019-11-07 15:37:57 +01:00
Florian Festi 4ac46840d2 NotesHolder: Fix various issues
Code for opening == 0.0 was broken (See #187)
Fixed placement of bottom
Fixed margin of USlotEdge

Resolves: #187
2019-11-04 08:52:26 +01:00
Florian Festi 927f483c19 New generator: LaserHoldfast - A holdfast for honey comb tables 2019-10-19 23:47:44 +02:00
Florian Festi e2cb90db89 NotesHolder: Split front into two pieces and set better default values
Resolves: #129
2019-10-19 21:49:43 +02:00
Florian Festi 011024f0a4 TrayLayout: Add comment to clarify the purpose of the classes
Resolves: #179
2019-10-18 19:06:07 +02:00
Florian Festi 228335a993 BurnTest: fix part placement 2019-10-13 18:42:40 +02:00
Florian Festi 89ea774a39 New generator: BurnTest 2019-10-13 18:39:06 +02:00
Florian Festi f5ed90ca88 SlatwallWrenchHolder: Add extra_distance parameter for Jonas 2019-10-10 20:00:22 +02:00
Florian Festi 8afdfdf3f5 New generator: BaynonetBox 2019-09-23 23:44:02 +02:00
Florian Festi 877915eb74 Arcade: Make height of monitor and depth of keyboard adjustable
Resolves: #166
2019-09-23 21:42:57 +02:00
Florian Festi d6495fc7b4 DrillBox: Fix font size
Now that the text() function has a fontsize parameter, setting the font size
on ctx before calling text() has no impact.

Resolves: #173

Thanks to Marko Luther for reporting and suggesting this fix!
2019-09-23 12:15:49 +02:00
Florian Festi 3ba90c517c TrayLayout: Fix cli
TrayLayout was still trying to produce a drawing and failed. Now TrayLayout is
not using most of the infrastructure and only TrayLayout2 has the capacity to
create a drawing.

Resolves: #172
2019-09-22 22:37:33 +02:00
Florian Festi b124c96c63 UnevenHeightBox: Use lid and bottom_egde for height calculation
when "outside" is set
2019-09-08 23:26:23 +02:00
Florian Festi 657b978aa0 StorageShelf: Use top and bottom_egde for height calculation with "outside" set 2019-09-08 23:26:23 +02:00
Florian Festi 605692f751 StorageRack: Use top and bottom_egde for height calculation with "outside" set 2019-09-08 23:26:23 +02:00
Florian Festi 5c0cc4d732 SlatwallTypeTray: Remove unused code carried over from TypeTray 2019-09-08 23:26:23 +02:00
Florian Festi 2b0bdde145 SlatwallTypeTray: Adjust height according to bottom_edge if outside selected 2019-09-08 23:26:23 +02:00
Guillaume Collic 6c9d23af6e New generator DividerTray 2019-08-30 21:00:32 +02:00
Florian Festi c3185f5129 Rename to Rack19HalfWidth to better fit with other Rack boxes
Move to Box group
Support more than one row of equipement
Move defaults to arguments to conform with general coding style
2019-08-30 12:27:13 +02:00
Stefan Schwarz 681ebbb694 add h19rack for a ported half 19inch rackmount 2019-08-30 11:58:21 +02:00
Florian Festi c81d23e605 SlatwallDrillBox: Fix all kind of errors 2019-08-15 23:12:35 +02:00
Florian Festi e4bdc190bb Flexbox3: Fix lid length 2019-08-08 22:53:08 +02:00
Florian Festi 6a3a9b984a SlatwallTypetray: Fix side joints of front wall (F -> f) 2019-07-31 23:40:06 +02:00
Florian Festi a38254667c Remove no longer needed line in _template.py 2019-07-18 20:55:07 +02:00
Florian Festi 17d7cd80ab Don't show generators in modules starting with underscore (templates) 2019-07-12 00:47:09 +02:00
Florian Festi 11174f2ecc New generator SlatwallDrillBox 2019-07-12 00:43:06 +02:00
Florian Festi 88e99a5726 New generator: FlexBox5
Resolves #147
2019-07-12 00:24:50 +02:00
Florian Festi e6f431ab15 New generator: MakitaPowerSupply 2019-07-07 16:26:29 +02:00
Florian Festi a19debf1bd Rename remaining Slatwall generators from Sw* to Slatwall* 2019-07-04 22:59:32 +02:00
Florian Festi 573b630adc New generator: SlatwallPlaneHolder 2019-07-04 22:39:34 +02:00
Florian Festi abdab6866a New generator: StorageRack - Box with rails to slide other boxes in 2019-06-30 20:53:42 +02:00
Florian Festi 2f7603b4b4 New generator: SlatWallWrenchHolder 2019-06-30 20:53:42 +02:00
Florian Festi 0105957c05 New generator: SlatWallChiselHolder 2019-06-30 17:19:02 +02:00
Florian Festi 138dffbf2a New generator: SlatWallCaliperHolder 2019-06-30 15:48:09 +02:00
Florian Festi be8aed394a New generator: Slatwall PlaneHolder 2019-06-30 15:18:11 +02:00
Florian Festi 09df973d69 New generator: SlatwallConsole - an outset and angled plate to mount stuff to 2019-06-22 00:07:23 +02:00
Florian Festi 810c3dbe3e New generator: SwTypeTray - a tray to hang at a slat wall 2019-06-22 00:05:57 +02:00
Florian Festi f1ce996aae New generator: SwPliersHolder - a bar to hang pliers on 2019-06-22 00:04:30 +02:00
Florian Festi 6a809e17e7 Move trapezoidWall() from UnevenHeightBox to Boxes class 2019-06-21 21:37:57 +02:00
Florian Festi 1e35a3b9ed New generator: SwSlottedHolder
A tool holder for slat wall
2019-06-21 21:22:10 +02:00
Florian Festi 5cef906a9a Add SlatWallHoleEdge (dD) classes
Similar to FigerHolesEdge (h)
2019-06-21 18:47:29 +02:00
Florian Festi 9415a6864f Add boxes/generators/_swtemplate.py as a starting point for Slat Wall boxes 2019-06-13 19:02:02 +02:00
Florian Festi aadf5ceafc Add Edge types, example and UIGroup for slat wall compatible boxes 2019-06-13 19:00:32 +02:00
chrysn 753422fa46 New generator DiscRack
A rack for storing disk-shaped objects vertically next to each other
2019-06-01 13:09:01 +02:00
Germain Lemasson e8e248994b Add a StorageSelf generator. This is a shelf for storing TypeTray boxes.
It is based on TypeTray generator. The sh parameter replace the sx parameter.
It is not a subclasse of TypeTray in order to have the top and bottom at
the right place.
2019-06-01 12:52:34 +02:00
Florian Festi a6ca723759 Mirror holes on the other walls
to have them match up. Otherwise boxes with non symetric top edges don't fit
together.

Fixes #141
2019-05-11 17:18:10 +02:00
Florian Festi 93c2093ef3 AllEdges: Fix spacing and add edegs around the corner
to make it more clear which direction the edges are pointing.

Related #132
2019-04-14 18:17:09 +02:00
Florian Festi ce8576d39e New generator: HeartBox 2019-03-24 21:52:26 +01:00
Florian Festi c09ee50fbd New generator: NotesHolder 2019-03-23 12:36:21 +01:00
Florian Festi 8bacd1f766 UniversalBox: Fix missing lids for various top_edges
Call got refactored away

Resolves: #121
2019-02-27 22:58:05 +01:00
Florian Festi 8db3942757 UniversalBox: Fix positioning of lid parts 2019-02-14 21:32:27 +01:00
Florian Festi 0d07f48b7f Remove .open() call from the .render() method
Having this call there was necessary in the past as the open() method would
need the canvas size as a parameter. This is now determined automatically
after rendering.

Still calling open() is deprecated but won't result in an error.
2019-02-08 17:43:15 +01:00
Florian Festi 861c8451e2 Remove call to .close() from .render() method
There is really no need for all the generator to care
Still calling it is deprecated but won't result in an error
2019-02-08 17:32:04 +01:00
Florian Festi 2ba6fa1bf3 Use .saved_context() instead of .ctx.save() and .restore() 2019-02-07 22:43:04 +01:00
Florian Festi 1724f67bdf Delete never to be finished printer generator
This should have become a 3D printer using strings in a delta configuration.
2019-02-07 22:43:04 +01:00
Florian Festi ded5addbe9 Remove no longer needed calls to ctx.stroke()
Boxes.move() take care of that nowadays
2019-02-07 22:43:04 +01:00
Wayne Wylupski abacdd486e Implement proper color handling
Avoid accessing Boxes.ctx (the cairo context) all over the code.
Have named colors
2019-02-03 16:28:02 +01:00
Florian Festi 6f4e94577b New generator: RectangularWall 2019-01-12 15:28:17 +01:00
Florian Festi d0356a12a3 Add parameters to addTopEdgeSettings() for changed defaults 2019-01-12 00:07:37 +01:00
Florian Festi 64fb498e6e UniversalBox: Use a more robust way of placing the pieces
No longer rely on all side walls having the same height
2019-01-11 19:41:02 +01:00
Florian Festi 97e7e3b68f TypeTray: Swap vertical edge types to match the layout of the UniversalBox 2019-01-11 19:41:02 +01:00
Florian Festi 5c70515f01 TypeTray: Add lids matching top_edge 2019-01-10 22:27:36 +01:00
Florian Festi 371097aa89 PaintStorage: Make grip hole smaller and more rounded
Fixes #108
2019-01-10 22:09:45 +01:00
Florian Festi c0a782b745 TypeTray: Add support for all top_edges 2019-01-03 11:13:27 +01:00
Florian Festi c2615d4b38 TypeTray: rearrange parts 2018-12-27 17:19:10 +01:00
Florian Festi 2df63b6ec8 ShutterBox: Add style with two rounded corners
Move generator to FlexBox category
2018-12-19 18:04:34 +01:00
Florian Festi 879b3149bb New generator: ShutterBox
A box with a rolling shutter made out of flex
2018-12-13 18:39:01 +01:00
Florian Festi 4a79c37e71 CardBox: Add gripping ledge to the lid 2018-12-11 19:33:52 +01:00
Florian Festi 4d2592fecf Add e edge to bottom_edge selection 2018-12-08 18:22:13 +01:00
Florian Festi 8f03030c53 PaintStorage: Add carrying hole 2018-12-08 12:37:20 +01:00
Florian Festi 925c6ce6dc PaintStand: Fix previous change 2018-11-24 22:47:35 +01:00
Florian Festi 17e4eb8563 PaintStorage: Fix heights 2018-11-15 22:10:19 +01:00
Florian Festi d85fa4e849 LaserClamp: Improve design
Extend bottom bracket and add hook
Use only one bottom bracket
Add finger ring to allow easier placement
Improve top hook
2018-11-05 22:08:23 +01:00
Florian Festi 0f999a89ad New generator: AllEdges showing all the standard edge types 2018-11-05 21:38:49 +01:00
Florian Festi fe89528e05 PaintStorage: Add support for hexagonal hole patterns 2018-10-29 18:16:16 +01:00
Florian Festi 36077e6cb0 PaintStorage: Optimize part placement 2018-10-29 15:44:18 +01:00
jens persson c28541a977 Add a generator for paintstand
A simple stackable paintstand, very much inspired by:
https://www.youtube.com/watch?v=6HJarJg1npk
2018-10-29 15:11:35 +01:00
jens persson e95f36a18a Parameterize Silverwarebox
Make the messurements selectable
2018-10-28 13:19:37 +01:00
Florian Festi 80288079af New generator: TwoPiece
Based on a generator with the same name by bobm123<bobm123@gmail.com>
2018-10-25 22:35:20 +02:00
Florian Festi 5b93c1228d CardBox: Add num param for the number of decks 2018-10-25 17:36:46 +02:00
Alexander Bulimov 5a13fbea8b Add DisplayCase generator 2018-10-24 21:28:54 +02:00
Florian Festi 2060293cf3 New generator: RoyalGame of Ur 2018-10-24 21:23:57 +02:00
Florian Festi 397cc81690 FlexBox3: Use .move()
Use .edgeCorner() instead of own implementation
2018-10-19 22:12:13 +02:00
Florian Festi f7c2d91e42 FlexBox2: Make latchsize configurable 2018-10-19 21:46:30 +02:00
Florian Festi 417a053ad3 FlexBox2: Use .move() 2018-10-19 21:45:26 +02:00
Florian Festi 4d76457d3a FlexBox: Make latchsize configurable 2018-10-19 21:35:11 +02:00
Florian Festi 791ef0fdca FlexBox: Use .move() 2018-10-19 21:33:52 +02:00
Florian Festi a9009732ac FlexBox4: Make latchsize configurable 2018-10-19 19:20:23 +02:00
Florian Festi 4ba18d87b7 FlexBox4: Modernize a bit and use .move() 2018-10-19 19:15:55 +02:00
Florian Festi 1cf671ddd2 FlexBox4: Calculate length of flex after adjusting the radius 2018-10-19 10:02:16 +02:00
jens persson 716fd389e3 Add a box for storage of playingcards
The box have place for two stacks of cards with a divider between.
It have a slide in lid.
2018-10-09 16:55:34 +02:00
Florian Festi 14c6338713 New generator: LaserClamp 2018-10-06 22:55:46 +02:00
Florian Festi b07983582e HingeBox: Add support for split lids 2018-09-30 15:31:16 +02:00
Florian Festi b8ff1b8cf6 TrayLayout: Make parsing a bit more robust
Ignore white space at the end of lines with horizontal walls
2018-08-27 16:55:00 +02:00
Florian Festi b4a95aca15 TrayLayout: Fix burn correction for bottom plate
All edges were missing the burn correction outset (aka kerf).
2018-08-27 15:13:31 +02:00
Florian Festi d360703cba TypeTray: Make bottom_edge parametric
This does not affect the inside walls
2018-08-16 20:49:12 +02:00
Florian Festi 8563818925 Hook: Boxify and parametrize generator 2018-08-14 14:01:59 +02:00
Marius Bergmann 2831b41d21 Add wall hook generator 2018-08-14 11:55:31 +02:00
Florian Festi f83ca31a0a RoundedBox: Add wallpieces param 2018-08-06 19:46:48 +02:00
Florian Festi 7c8ae621f7 CloseBox: Put bed blots at the right places
Keep them still disabled, though.
2018-07-25 16:34:58 +02:00
Florian Festi 44bce898e0 UniversalBox: Add alternative "lid" for f and F top_edges:
A rim leaving the box open
2018-07-02 19:07:26 +02:00
Sebastian Reichel 8b172cbddd Add 10" rack box derived from 19" rack box 2018-06-27 21:48:35 +02:00
Florian Festi 6538c92910 OrganPipe: Offer multiple units for the pressure given 2018-05-18 14:12:30 +02:00
Florian Festi 1d0aa05e9a OrganPipe: Use unicode for Py 2 compat 2018-05-12 17:14:02 +02:00
Florian Festi d9e8930e31 OrganPipe: Add encoding 2018-05-12 17:11:26 +02:00
Florian Festi 4798c24815 New generator: Organ pipe
Still untested
2018-05-12 17:06:10 +02:00
Florian Festi 50b9bc9ffb TypeTray: Fix finger holes in bottom which had been mirrored in x direction 2018-04-25 23:36:32 +02:00
Florian Festi 616bf42239 RegularBox: Fix top edge for "angled hole" top 2018-04-25 22:02:52 +02:00
Florian Festi d3c922d289 RegularBox: Use FingerJointSettings for vertical edges, too
Fixes #65
2018-04-25 22:02:24 +02:00
Florian Festi 879ae1af68 DisplayShelf: Do not render front wall if set to zero 2018-04-15 19:43:31 +02:00
Florian Festi ebe02e2be5 DisplayShelf: Use better defaults 2018-04-15 19:43:31 +02:00
Florian Festi b2c54310b6 UnevenHeightBox: Fix lid
Looks like it is difficult to come up with a really non symmectrical test case.
Thanks to Mekol for pointing this out!

Related #60
2018-03-17 21:04:24 +01:00
Florian Festi fa44eb27cf UneveHeigthBox: Minor tweaks 2018-03-17 17:32:21 +01:00
Florian Festi 58cb06ec94 UnevenHeightBox: Add lid 2018-03-17 17:19:47 +01:00
Florian Festi 7c716a9e5f UnevenHeightBox: Make bottom edge parametric 2018-03-15 20:46:00 +01:00
Florian Festi 786ff222c2 New generator: UnevenHeightBox
Box with different height in each corner
2018-03-15 19:08:47 +01:00
Florian Festi 0604744284 OttoSoles: Add dove tail joints to the connecting edges 2018-03-11 17:43:55 +01:00
Florian Festi f2106a2c8c OttoSoles: Add support for tabs 2018-03-11 09:13:40 +01:00
Florian Festi 49ce2ed412 New generator: Ottosoles
Foam soles for the OttO Bot
2018-03-10 19:28:30 +01:00
Florian Festi dd7d282c65 Rack19Box: Fix width and placement of holes 2018-02-27 18:41:39 +01:00
Florian Festi 66c419ab7f New generator: Rack19Box
Closed box with screw on top for mounting in a 19" rack.
2018-02-27 18:04:26 +01:00
Florian Festi c3917d3292 IntegratedHingeBox: switch x and y measurements
So the hinge is at the backside along the x axis
2018-02-20 08:23:07 +01:00
Florian Festi 8cb9919968 FlexBox2: Rename params to reflect the actual axis of measurement
h -> x
y -> h
x -> y
2018-02-19 16:49:04 +01:00
Florian Festi 039fe5f2ee ElectronicsBox: Fix holes in the lid 2018-02-03 22:33:27 +01:00
Florian Festi a70222d646 New generator: RackBox 2018-02-03 22:31:53 +01:00
Florian Festi 6ef43a8f48 Add flangedWall() and use it in the ElectronicsBox 2018-02-03 21:52:12 +01:00
Florian Festi b0bef745b2 ElectronicsBox: Fix top edge and height 2018-02-02 14:06:18 +01:00
Florian Festi a53c5857c2 New generator: AngledCutJig
For making angled cuts in a laser cutter
2018-01-21 22:05:48 +01:00
Florian Festi 62b6016448 OttoLegs: Increase number of tabs for feet and ankles 2018-01-13 21:11:33 +01:00
Florian Festi 68f1c375f7 OttoLegs: Move tabs to outer ring 2017-12-20 18:25:55 +01:00
Florian Festi 703d0e49db OttoBody: Add tabs to the PCB clamps 2017-12-19 20:10:08 +01:00
Florian Festi f44f87a25c Remove print for Python 2 compat 2017-12-19 19:36:37 +01:00
Florian Festi 946d040bac OttoBot: Move to Misc UI Group
Set default leg legth to 34mm
2017-12-18 23:49:18 +01:00
Florian Festi e26991695a Mark top side of servo mount.
Move servo mounts up as they need to be cut separately (in 5mm)
2017-12-17 15:30:32 +01:00
Florian Festi e5bb6a5d7a Add tabs to Boxes.edge() and most Edge classes
and Boxes.polyline()

Add to some parts of the Otto Bot
2017-12-15 16:45:32 +01:00
Florian Festi e0caa3aad8 OttoBody: Add fix for changed ChestHinge 2017-12-09 16:54:20 +01:00
Florian Festi 9dfa95f45b Fix ChestHinge
Add the play of the hinge to the width of the edge
Adjust IntegratedHingeBox
Fixes #45
2017-12-07 22:29:09 +01:00
Florian Festi 319b1f869f Use unicode for Python 2 compat 2017-11-30 23:32:30 +01:00
Florian Festi d52b561a2f Use explicit encoding 2017-11-30 23:30:50 +01:00
Florian Festi 3dfd99c68a Rename method to not collide with new description property 2017-11-30 22:46:35 +01:00
Daniela Festi 72e6dd2213 Added a description to TrafficLight generator 2017-11-30 22:46:35 +01:00
Florian Festi 0d9885ad4c Stachel: Fix length of pin clamp for middle layer 2017-11-23 21:04:54 +01:00
Florian Festi 2772eba87c Gears: holes for the shafts 2017-11-22 21:32:25 +01:00
Florian Festi a7f6ef1b62 Gears: Print sizes 2017-11-22 21:32:04 +01:00
Florian Festi afbb8d11fd Gear generator 2017-11-22 21:32:04 +01:00
Florian Festi f77c19d839 Stachel: Clean up and move generator to Misc 2017-11-21 23:08:39 +01:00
Florian Festi 5a6bc71a7c Stachel: replace absolute sizes with (internal) parameters 2017-11-21 22:39:57 +01:00
Florian Festi 941676d2b7 New generator: Stachel - an end pin for bass recorders 2017-11-21 22:39:57 +01:00
Florian Festi 08d7a026b1 NemaMount: Add finger holes to copy on another part
instead of using the base plate
2017-11-19 19:30:06 +01:00
Florian Festi 642212d2ce New generator: NemaMount 2017-11-19 18:10:59 +01:00
Florian Festi 46c4960edc New generator: Display 2017-11-18 18:28:13 +01:00
Florian Festi 45c73e57fb New generator: EletronicsBox
Closed box with screw on top and mounting holes
2017-11-15 17:19:41 +01:00
Florian Festi 36c0ec48fe TypeTray: Add closedtop parameter
Add a top wall turning the type tray into a closed box with multiple
compartments
2017-11-14 20:21:01 +01:00
Florian Festi 7793729688 New generator:LBeam
Simple Lbeam made of two wall joint with a right angle
2017-11-14 20:20:08 +01:00
Florian Festi 8d846df9d1 Add D holes to knobs 2017-11-07 23:39:50 +01:00
Marius Bergmann c0325b52ac template: Remove invalid parameter and whitespace 2017-11-03 22:54:06 +01:00
Florian Festi dd2cedeb57 Knobs: Improve param descriptions 2017-10-01 21:13:29 +02:00
Florian Festi dfcf3d65c8 New generator: ConcaveKnob in Parts 2017-10-01 20:34:19 +02:00
Florian Festi 647c5302b6 New generator: WaivyKnob 2017-10-01 20:20:36 +02:00
Florian Festi 9dbc8fd98b Modernize _template.py 2017-09-16 21:30:41 +02:00
Florian Festi f829ff2a82 PoleHook: Use screwhead param for knob 2017-09-16 21:30:41 +02:00
Florian Festi b623008ea3 ClosedBox: fix (commented out) BedBolt support 2017-09-13 11:39:03 +02:00
Florian Festi 23a1da105e WineRack: Remove debug code for checking number of walls needed. 2017-09-05 23:05:11 +02:00
Florian Festi 7453455512 WineRack: Make unnecessary walls optional 2017-09-05 23:00:54 +02:00
Florian Festi 0e7827f9a9 WineRack: Add front cover 2017-09-05 21:04:20 +02:00
Florian Festi fbfb851474 New generator: WineRack
A honey comb like wine rack
2017-09-05 21:04:20 +02:00
Florian Festi 592fbe95c4 OttoLegs: Change ankles. Fix servo horn with a C-ring
Fixes issue with servo horns only being adjustable in steps of 18 degrees
This led to missaligned feet which resulted in loss of freedom of movement.
2017-08-19 22:14:30 +02:00
Florian Festi 6fecb9aa29 OttoBody: Move main switch to outer wall
Shorten servo holder so it no longer needs a hole for the switch
2017-08-19 19:31:54 +02:00
Florian Festi 398851255d OttoLegs: Use servo horn for actuating the ankles 2017-08-12 00:07:34 +02:00
Florian Festi 4dd271df74 OttoLegs: Make ankle screw screwed into leg
to give more stability to the joint
2017-08-11 18:44:34 +02:00
Florian Festi bb76a8bd7b OttoLeg: Use partsMatrix to get multiple part 2017-08-11 17:46:50 +02:00
Florian Festi 09dd779cbd OttLegs: Make hole for servo cable over whole width of the leg 2017-08-07 17:03:57 +02:00
Florian Festi fafc1c01ef OttoLegs: break ankles into separate paths 2017-08-03 23:19:32 +02:00
Florian Festi e91f53b0fa OttoLegs: Change design of ankles 2017-08-03 23:00:20 +02:00
Florian Festi b4b6799721 OttoBody: Add hook to PCB Clip 2017-08-03 22:32:33 +02:00
Florian Festi e3035da713 OttoBody: Move hole for push button 2017-08-01 21:19:01 +02:00
Florian Festi 2e9ac29d01 OttoLegs: Make length of legs configurable 2017-08-01 21:17:35 +02:00