a53c5857c2
New generator: AngledCutJig
...
For making angled cuts in a laser cutter
2018-01-21 22:05:48 +01:00
62b6016448
OttoLegs: Increase number of tabs for feet and ankles
2018-01-13 21:11:33 +01:00
68f1c375f7
OttoLegs: Move tabs to outer ring
2017-12-20 18:25:55 +01:00
703d0e49db
OttoBody: Add tabs to the PCB clamps
2017-12-19 20:10:08 +01:00
f44f87a25c
Remove print for Python 2 compat
2017-12-19 19:36:37 +01:00
946d040bac
OttoBot: Move to Misc UI Group
...
Set default leg legth to 34mm
2017-12-18 23:49:18 +01:00
e26991695a
Mark top side of servo mount.
...
Move servo mounts up as they need to be cut separately (in 5mm)
2017-12-17 15:30:32 +01:00
e5bb6a5d7a
Add tabs to Boxes.edge() and most Edge classes
...
and Boxes.polyline()
Add to some parts of the Otto Bot
2017-12-15 16:45:32 +01:00
e0caa3aad8
OttoBody: Add fix for changed ChestHinge
2017-12-09 16:54:20 +01:00
9dfa95f45b
Fix ChestHinge
...
Add the play of the hinge to the width of the edge
Adjust IntegratedHingeBox
Fixes #45
2017-12-07 22:29:09 +01:00
319b1f869f
Use unicode for Python 2 compat
2017-11-30 23:32:30 +01:00
d52b561a2f
Use explicit encoding
2017-11-30 23:30:50 +01:00
3dfd99c68a
Rename method to not collide with new description property
2017-11-30 22:46:35 +01:00
72e6dd2213
Added a description to TrafficLight generator
2017-11-30 22:46:35 +01:00
0d9885ad4c
Stachel: Fix length of pin clamp for middle layer
2017-11-23 21:04:54 +01:00
2772eba87c
Gears: holes for the shafts
2017-11-22 21:32:25 +01:00
a7f6ef1b62
Gears: Print sizes
2017-11-22 21:32:04 +01:00
afbb8d11fd
Gear generator
2017-11-22 21:32:04 +01:00
f77c19d839
Stachel: Clean up and move generator to Misc
2017-11-21 23:08:39 +01:00
5a6bc71a7c
Stachel: replace absolute sizes with (internal) parameters
2017-11-21 22:39:57 +01:00
941676d2b7
New generator: Stachel - an end pin for bass recorders
2017-11-21 22:39:57 +01:00
08d7a026b1
NemaMount: Add finger holes to copy on another part
...
instead of using the base plate
2017-11-19 19:30:06 +01:00
642212d2ce
New generator: NemaMount
2017-11-19 18:10:59 +01:00
46c4960edc
New generator: Display
2017-11-18 18:28:13 +01:00
45c73e57fb
New generator: EletronicsBox
...
Closed box with screw on top and mounting holes
2017-11-15 17:19:41 +01:00
36c0ec48fe
TypeTray: Add closedtop parameter
...
Add a top wall turning the type tray into a closed box with multiple
compartments
2017-11-14 20:21:01 +01:00
7793729688
New generator:LBeam
...
Simple Lbeam made of two wall joint with a right angle
2017-11-14 20:20:08 +01:00
8d846df9d1
Add D holes to knobs
2017-11-07 23:39:50 +01:00
c0325b52ac
template: Remove invalid parameter and whitespace
2017-11-03 22:54:06 +01:00
dd2cedeb57
Knobs: Improve param descriptions
2017-10-01 21:13:29 +02:00
dfcf3d65c8
New generator: ConcaveKnob in Parts
2017-10-01 20:34:19 +02:00
647c5302b6
New generator: WaivyKnob
2017-10-01 20:20:36 +02:00
9dbc8fd98b
Modernize _template.py
2017-09-16 21:30:41 +02:00
f829ff2a82
PoleHook: Use screwhead param for knob
2017-09-16 21:30:41 +02:00
b623008ea3
ClosedBox: fix (commented out) BedBolt support
2017-09-13 11:39:03 +02:00
23a1da105e
WineRack: Remove debug code for checking number of walls needed.
2017-09-05 23:05:11 +02:00
7453455512
WineRack: Make unnecessary walls optional
2017-09-05 23:00:54 +02:00
0e7827f9a9
WineRack: Add front cover
2017-09-05 21:04:20 +02:00
fbfb851474
New generator: WineRack
...
A honey comb like wine rack
2017-09-05 21:04:20 +02:00
592fbe95c4
OttoLegs: Change ankles. Fix servo horn with a C-ring
...
Fixes issue with servo horns only being adjustable in steps of 18 degrees
This led to missaligned feet which resulted in loss of freedom of movement.
2017-08-19 22:14:30 +02:00
6fecb9aa29
OttoBody: Move main switch to outer wall
...
Shorten servo holder so it no longer needs a hole for the switch
2017-08-19 19:31:54 +02:00
398851255d
OttoLegs: Use servo horn for actuating the ankles
2017-08-12 00:07:34 +02:00
4dd271df74
OttoLegs: Make ankle screw screwed into leg
...
to give more stability to the joint
2017-08-11 18:44:34 +02:00
bb76a8bd7b
OttoLeg: Use partsMatrix to get multiple part
2017-08-11 17:46:50 +02:00
09dd779cbd
OttLegs: Make hole for servo cable over whole width of the leg
2017-08-07 17:03:57 +02:00
fafc1c01ef
OttoLegs: break ankles into separate paths
2017-08-03 23:19:32 +02:00
e91f53b0fa
OttoLegs: Change design of ankles
2017-08-03 23:00:20 +02:00
b4b6799721
OttoBody: Add hook to PCB Clip
2017-08-03 22:32:33 +02:00
e3035da713
OttoBody: Move hole for push button
2017-08-01 21:19:01 +02:00
2e9ac29d01
OttoLegs: Make length of legs configurable
2017-08-01 21:17:35 +02:00
979b6ae936
OttoBody: Add push button
2017-07-31 21:18:06 +02:00
a639c04de2
OttoBody: Clips for keeping the mouth shut
2017-07-31 21:08:26 +02:00
31e3817f32
OttoBody: New PCB Clamps
2017-07-31 20:46:41 +02:00
fd23c74e07
Otto Body: parts for mounting the PCB
2017-07-30 21:23:00 +02:00
e26d17c840
AngledBox: Don't overwrite h param
...
Using h as temporary variable was overwriting the variable containing the
height of the box.
Fixes #41
2017-07-28 23:33:36 +02:00
83a72552e2
Ottobot: Make hole for USB plug a bit smaller again
2017-07-25 22:43:11 +02:00
c823cb78d6
OttoBot: Add Hole for on/off switch
2017-07-25 21:57:58 +02:00
3876ea5ddd
Ottobot: Increase hole for USB plug
2017-07-23 21:29:14 +02:00
074646fdec
_template.py tweaks
2017-05-20 20:41:51 +02:00
82463317bb
Edges generator for printing the registerd Edge types
...
Not really a generator...
2017-05-20 20:41:51 +02:00
ae619aabea
Flexbox4: Fix length of lid
...
to overlap the side wall
2017-04-11 21:09:41 +02:00
7bbf82c958
UBox: Fix size of lid
2017-04-11 20:55:21 +02:00
b63dcfeee6
Make Traylayout work without main function
2017-04-05 04:33:42 +02:00
5b9c8e4d71
Remove main function from generators
...
Generators are no longer executable on their own. Use scripts/boxes
instead.
2017-04-05 04:33:42 +02:00
f9c0cb8cab
Support putting class and instances into UI Groups
2017-04-02 02:31:37 +02:00
8e65298c6b
Planetary2: Print gearing ratio and change default for sun gear
2017-04-01 23:54:44 +02:00
12f2cbc1e2
Planetary2: Add allignment pins to sun gear
2017-04-01 21:18:48 +02:00
273190932f
Planetary2: Order part the way they need to go together
2017-04-01 21:06:57 +02:00
4c17d6a4a1
Planetary2: Put planet gears in the order they need to go together
2017-04-01 20:59:19 +02:00
7f1e54be15
Planetary2: Add pin holes for ring gear and add second ring
2017-03-30 20:59:13 +02:00
8487d5c379
Planetary2: New generator for a ~100 reduction to belt pulley
2017-03-29 07:44:48 +02:00
bad114400f
Use better default for height of pulley (using the new keyword style)
2017-03-29 07:41:05 +02:00
c2fa8c85cf
Pulley: Add insideout param
...
This allows using timing belts as strainwaves in harmonic drives.
2017-03-22 22:03:09 +01:00
71bd013f3f
RegularBox: Better description
2017-03-13 11:41:12 +01:00
cd0d49bf6f
OttoLegs: Use two different hole sizes for the ankle
...
to allow screwing it into one side while moving freely on the other
2017-03-12 14:47:21 +01:00
cd3fee5e76
OttoLegs: More tweaks
...
Lengthen front by 1mm to close gap to servo
Lower ankle hole at leg by 0.5mm
Shorten internal wall holding the servo at top
2017-03-11 20:14:29 +01:00
672295310b
OttoBody: Body for Otto LC
2017-03-11 18:22:41 +01:00
c6c2e203f2
OttoLegs: Make ankle bolt diameter configurable
2017-03-11 18:22:41 +01:00
271bed0308
OttoLegs: wall for better fixating the servos
2017-03-11 18:22:41 +01:00
6bc695a418
OttoLegs: Add second leg
2017-03-11 18:22:41 +01:00
e316877d06
OttoLegs: Make room for cables
2017-03-11 18:22:41 +01:00
db4e878bb4
OttoLegs: Legs for Otto LC
2017-03-11 18:22:41 +01:00
4ab1dcc323
RoundedBox: Fix description
2017-03-06 22:24:05 +01:00
eecbceda11
Rename Box2 -> UniversalBox
2017-03-06 22:24:05 +01:00
47f3037e23
rename Box3 -> OpenBox
2017-03-06 22:24:05 +01:00
5026c2bc03
Rename Box5 -> HingeBox
2017-03-06 22:24:05 +01:00
e5b19978dd
Rename Box4 -> IntegratedHingeBox
2017-03-06 22:24:05 +01:00
75b7724255
Rename Box -> ClosedBox
2017-03-06 22:24:05 +01:00
5e33d057fc
UBox: Limit radius to possible values and merge flex if radii touch
2017-03-04 15:29:28 +01:00
cb8ebefeb1
Fix Servo.choices() and use it in robotarm
2017-02-25 19:59:16 +01:00
174b20fc11
Fix main
2017-02-25 19:40:24 +01:00
ce87babfdd
RoundedBox: Fix hole size
...
Size calculation was wrong but compensated the broken size adjustment with
"outside" set.
2017-02-25 15:52:51 +01:00
490d089a83
Planetary: Python2 fix. // doesn't allow floats in Python 2
2017-02-25 11:24:58 +01:00
1b3f9dbc3a
Robotarm: Generator for servo powered robot arm segments
2017-02-22 22:33:22 +01:00
d2774f151d
Lamp: fix no longer valid default in setting
2017-02-18 19:13:57 +01:00
cc577956a4
Flexbox3: Fix radius of lid
...
May still be off a bit. But I can't see why...
2017-02-18 19:06:10 +01:00
117ace3233
FlexBox3: Fix finger joints of lid
2017-02-18 19:06:10 +01:00
1f9342b678
Castle: Make available in UI and adjust to current code base
2017-02-18 19:06:10 +01:00
561eb0034c
Add "Unstable" UIGroup
2017-02-15 15:55:01 +01:00
d3c76f2b9e
Put box generator into groups and adjust the menu web page accordingly
2017-02-13 17:31:58 +01:00
5a0f3d42ea
Add UIGroup class and instances for structuring the box generators
2017-02-13 17:31:02 +01:00
c820c1b77d
Move lid code from boxes/generators/box2.py to boxes/lids.py
...
Rename the classes to no longer show up in the list of generators
2017-02-12 23:18:37 +01:00
0739fd0b94
Exclude Boxes classes starting with _ in getAllBoxGenerators()
...
Exclude mix-in classes that are not supposed to be used on their own
2017-02-12 22:20:32 +01:00
399e5b468f
New generator: UBox - a box with rounded corner at the bottom
2017-02-12 15:00:17 +01:00
b59de950c0
Box2: Refactor lid generation out of the Box2 class
2017-02-12 15:00:17 +01:00
a7d0dda9f8
New generator: Box5 box with lid attached with cabinet hinges
2017-02-11 18:15:44 +01:00
305986dad8
Add cabinet hinge to top_edge and support it in Box2
2017-02-11 18:15:44 +01:00
fb5398b30d
PoleHook: Initial commit
2017-02-11 18:15:34 +01:00
250131e152
Fix previous fix *sigh*
2017-02-09 18:47:20 +01:00
3e3ed3b0dd
Add finger joint settings again
...
Got removed accidentially in 8d754c
2017-02-09 00:02:41 +01:00
da6dcb4c68
Box4: Use ignore_widths to get finger joints on the whole length of all edges
2017-02-07 20:18:48 +01:00
1e6893d0b1
Box4: Box with boxy lid and built-in hinge
2017-02-06 22:36:11 +01:00
8d754c3855
Use default finger/width settings of 2.0 for every box
2017-01-30 10:12:27 +01:00
17e2b55fcf
Box2: Add flat lid
...
Make chestlid param a general lid param
2017-01-24 22:49:25 +01:00
28ad1c6dc3
RoundedBox: Add top param for top opening and lid
2017-01-21 13:54:58 +01:00
a8241b2118
New generator: RoundedBox
...
Still very basic. Needs top parameter similar to AngledBox
2017-01-19 21:36:43 +01:00
fa4fd943ca
New generator: DisplayShelf - a shelf with forward slanted floors
2017-01-14 23:13:22 +01:00
8514ede2c3
AngledBox: Fix fingers on top of walls for "angled hole"
2017-01-08 18:56:05 +01:00
7b5614659a
New generator: AngledBox
2017-01-08 17:25:36 +01:00
8dc13440ee
Fix boolean params. Not passing 0, None, False or off works for setting them to False
...
Thanks to chrisjshull for pointing out how to fix this in the web UI.
Fixes #19
2017-01-08 17:25:36 +01:00
0cbd713718
RegularBox: Fix outside parameter
2016-12-17 11:36:26 +01:00
0dc6aef5d4
RegularBox: Add angled hole top style
2016-12-17 11:24:47 +01:00
6298c80527
RegularBox: Fix angled lid
2016-12-14 21:02:49 +01:00
a5fd1775e0
New generator: RegularBox
2016-12-13 22:58:56 +01:00
75adf0b15f
TrafficLight: Add support for horizontal layout of lights
2016-11-30 21:45:17 +01:00
f133e2aa12
TrafficLight: Add windows to be cut from transparent (and colored) material
2016-11-30 18:31:44 +01:00
16e93ca086
TrafficLight: Fix edge type for front panels
2016-11-30 11:29:55 +01:00
23cf0eaa3a
TrafficLight: Add param for number of lights
2016-11-29 23:43:01 +01:00
273174fae8
New generator: TrafficLight
2016-11-29 23:42:17 +01:00
aa4c0fd1d4
Add FingerJoints to the bottom of the front plates
2016-11-28 21:11:38 +01:00
0fc6527150
BinTray: Switch slots between vertical and horizontal walls
...
to better support the floors.
Also fix margin of BinFront edge class(es)
2016-11-13 11:58:07 +01:00
c39b33ad14
New BinTray generator
2016-11-13 00:40:55 +01:00
0cde4a71e6
Add params for edge settings to all generators
2016-11-01 23:46:25 +01:00
33d11487de
Add edges for a sliding lid
...
Add to top_edges and support in Box2
2016-10-30 20:17:13 +01:00
4e632325e3
Arcade: Increase height of keyboard
2016-10-17 21:29:58 +02:00
9b4a45a1d5
Arcade: Add width as a parameter
...
Fix movement of side
2016-10-17 21:16:02 +02:00
ff6ba3595d
New Generator: Arcade - a desktop arcade cabinet
2016-10-17 21:12:12 +02:00
586aeb7fb3
Allow finger joints as top edge
...
Add matching lid to Box2
2016-10-02 20:47:02 +02:00
b0fb04762b
Rotary: Make beam dimmensions parametric
2016-09-28 17:56:42 +02:00
46f40bdae6
Planetary: Fix description
2016-08-22 20:48:21 +02:00
93af56ff9c
Code Reformat #1
2016-08-17 15:07:41 +02:00
af167295b8
Rotary: Fix spindle mechanism. Increase width of scissor lift to 70mm.
2016-08-05 22:59:35 +02:00
828cd12d49
Rotary: Add knifethickness param and support variant for honey comb table
2016-08-05 22:59:35 +02:00
072845be57
Rotary: Make some clearing space over the idle rollers
2016-08-05 22:59:22 +02:00
77e39669e8
Rotary attachment for laser cutter - first steps
2016-08-05 22:58:39 +02:00
36d6cd77c3
Fractal jigsaw puzzle. Alpha verion without splitting stuff into pieces.
2016-08-05 21:33:41 +02:00
db38122125
Remove unnecessary moveTo() commands
...
.move() now leaves some space around parts
2016-08-03 22:20:13 +02:00
419cccc7dd
PlanetaryGear: add maxplanets and deltateeth params
2016-07-31 17:44:19 +02:00
6dd482be9c
Generate the list of generators automatically
...
Generate new traylayout class to make this work with the web interface
Minor fix to not error out in web interface for non existing doc string
2016-07-31 17:18:17 +02:00
b6d84b5c58
Mark generators which should not be shown in the web interface
2016-07-31 16:37:17 +02:00
77ba187c70
Name generator classes properly
2016-07-31 14:15:06 +02:00
776b0a2c27
Fix for extended function signature
2016-07-28 22:46:06 +02:00
4cf33dae50
Move spacing out of the Edge margin() and into Boxes.move()
...
Also move ctx.save() and restoreinto Boxes.move().
Adjust (hopefully) all places using it.
2016-07-27 22:19:32 +02:00
558b63f20d
Fix size of base plate
...
Pass correct spoke_width
2016-07-25 23:37:12 +02:00
1849bfd5ab
New PlanetaryGear generator
2016-07-25 19:14:35 +02:00
284857d94a
Fix typo
2016-07-22 00:18:32 +02:00
575f41beff
Add param for gears
2016-07-19 19:37:21 +02:00
ed8ab9a364
Fix width of gearbox to make space for two big gears
2016-07-19 19:37:21 +02:00
a7728d8e32
New GearBox generator
2016-07-16 15:32:06 +02:00
d6bd708db5
Python2 compat fix
2016-07-13 20:10:13 +02:00
5201138390
Add Pulley generator
2016-07-13 20:04:57 +02:00
33a1333ad9
Add FlexTest2 for new 2D flex pattern
2016-07-12 16:54:44 +02:00
4b487014d0
Fix project for use within virtualenv
...
- Use /usr/bin/env to determine path to python3 instead of a hard-coded
path, so that virtualenv stubs work properly.
- Change package name to 'boxes' ('boxes.py' did not work within
virtualenv).
2016-07-12 13:13:03 +02:00
3f97d7ad77
Add outside parameter to some generators
2016-07-09 23:10:43 +02:00
70d46dd06a
Flexbox4: Limit radius to sane values
2016-07-09 10:55:42 +02:00
281c80b4e9
flexbox4: Be more generous when merging flex on top
2016-07-09 10:55:42 +02:00
ea6f45a24b
flexbox2: Be more generous when merging flex on top
2016-07-09 10:55:42 +02:00
8f0dc0330e
Merge flex if rounded edges meet at top and bottom
2016-07-09 10:55:42 +02:00
f65bafbcac
Flexbox2: Limit radius to sane values
2016-07-09 10:55:42 +02:00
2043ee6d8a
Flexbox: Limit radius to sane values
2016-07-09 10:55:42 +02:00
401ef597d8
Make axle disk out of the hinge hole
...
Remove no longer needed .parts() method
2016-07-06 23:07:44 +02:00
28183257d6
Add optional gripping edges at the side of lids
...
And use it for double lid in box2
2016-07-03 16:00:25 +02:00
46f1e1d440
Change chars for custom edge from gG to aA
...
Free g for upcoming grip edge
2016-06-30 13:59:13 +02:00
f3062a106f
Adjust description of box2
2016-06-30 11:50:01 +02:00
19dceeaf78
Add support for split lid to box2 (select top edge with two hinges)
2016-06-30 11:14:26 +02:00
79b39fa0c0
Add option for a hinged lid to box2
...
Select edge with hinge as top edge to get the lid generated
2016-06-30 10:32:41 +02:00
8be789b134
Add flexbox4 to module list
2016-06-22 23:07:46 +02:00
200f473747
Fix wrong variable access
2016-06-22 10:22:07 +02:00
6299e5202d
box2: Add chest like lid
2016-06-21 21:53:24 +02:00
6688957a72
New flexbox
2016-06-14 20:36:26 +02:00
0ba0c19af2
Detect size of drawing and set svg viewport accordingly
...
Remove width and height parameter from Boxes.open()
Code for detecting the size ignores text. Until this is fixed you need
to surround text by lines of some sort.
2016-06-07 20:24:46 +02:00
87582ac535
Fix flextest
2016-05-20 21:33:22 +02:00
d61567d8f1
box2: Add optional click on top
2016-05-03 23:14:08 +02:00
3086485a25
traylayout: set size of canvas
2016-04-19 09:49:58 +02:00
dad830d775
Remove unused helper methods
2016-04-19 09:36:14 +02:00
b22ee1f760
Replace Edge.width() with .startwidth() and .endwidth()
...
to allow changes in the with of the edge. This is currently needed for the
CompoundEdge but may be used by future edges, too.
2016-04-19 09:33:33 +02:00
ff1dc830e3
traylayout: fix cuts in inner corners of the floor plate
2016-04-18 17:42:29 +02:00
b0a2ce8b22
Use local vars instead of calling len()
2016-04-18 17:41:26 +02:00
3c56abf047
traylayout: Use straight edges on walls with no floor underneeth
...
Still need to move it over to use E in stead of e
2016-04-17 18:08:09 +02:00
223f078726
Add StackableEdge class
2016-04-09 15:44:27 +02:00
7048681f3e
Add params for top and bottom edges of box2
2016-04-09 11:47:12 +02:00
6cf7af75c6
Fix bedbolts in box2
2016-04-06 20:00:19 +02:00
0399bafe1b
Remove the Edges instances form the Boxes name space.
...
Move over all generators to use Boxes.edges.
2016-04-02 20:52:27 +02:00
6a6336c002
Fix finger setting messup
2016-04-02 20:29:09 +02:00
b99a381b4f
Fix doc string to be used in UI
2016-04-02 18:02:00 +02:00
25be6dbc94
Add CLI params for basic finger joint settings
...
Change generators over to set defaults instead of overwriting the settings
2016-04-02 17:39:26 +02:00
a3ceb74024
Remove left over print
2016-03-30 21:11:42 +02:00
e32a314c81
Add template for writing generators
2016-03-29 22:10:54 +02:00
34e06cace5
Use output param for generating layout file
2016-03-28 12:16:06 +02:00
70bb1bf5af
Move box generators into boxes.generators sub module
2016-03-25 22:30:07 +01:00
Florian Festi
Daniela Festi
Florian Festi
Marius Bergmann
christopher
schinken